EVENT LOG FOR SITE BCC The first line of each entry contains a date/time stamp & who is reporting. The most recent entry is listed first. Date Time Who ---------- ----- -------- 12/28/2010 10:57 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 27/12/2010 11:02:40, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 12/27/2010 10:57 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 27/12/2010 11:02:40, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 12/27/2010 10:36 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 27/12/2010 10:41:50, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 12/23/2010 11:27 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 22/12/2010 11:32:32, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 12/22/2010 11:27 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 22/12/2010 11:32:32, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 12/22/2010 10:49 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 22/12/2010 10:54:27, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 12/13/2010 12:56 Troy At the site to check on why ARRT failed Thanksgiving weekend. The thought was that perhaps water had found its way into the housing and ice had provided enough resistance to cause the unit to think it had over traveled. No water was found. A possible explanation is that the belt shrunk due to the cold which in turn caused too much resitance. Either way, the unit was ran in several times and everything is operating smoothly. The UPS for the transceiver is in an alarm condition that will not clear. The battery is not re-charging. Toggling power, un-plugging and re- plugging did not help the situation. A new UPS will be delivered on the next site visit. The transceiver is up and running. The UPS was not brought back because I am unsure if it is used in the COE LOTO. A small programming change was made to the ARRT program so that I could do some automated "off-season" testing without submitting the results via email and thus skewing the graphs. No other problems to report. 12/13/2010 11:15 Alan PC1 crashed and then recovered from a blue screen at ~23:55 12-12-2010. Files BCC10346.V2 - X2 were submitted from PC2 to fill the gap. The site is dewatered. No problems to report. 11/29/2010 08:09 Troy The Ultra 3000 drive that powers the ARRT was disabled today. The unit had been set up to travel once a day at 10:00 am to keep the unit from sitting dormant all winter long. Since the cold snap the unit has expericence an overtravel alarm every time it tries to move. PSMFC will investigate this on the next site visit. In the interm the unit will remain disabled. 11/23/2010 09:53 Troy Winter Mode was activated this morning at 0950. The humidity should drop to single digits and hopefully the temperature will remain in the 40's or better. 11/23/2010 09:50 bcc_robo Content-description: Mail message body Event on Tagname: WINTER_MODE_ON Status: ALM, Level: LVL *** Tagname Description: Winter Mode Selected *** Tagname Value: Alarm Time: 23/11/2010 09:55:15, Current value: 1.000000 ALARM Action: Winter Mode On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 11/23/2010 06:21 bcc_robo Content-description: Mail message body Event on Tagname: RH_Level_Low Status: ALM, Level: LVL *** Tagname Description: A RH transmitter is reading Low RH *** Tagname Value: Alarm Time: 23/11/2010 06:25:43, Current value: 1.000000 ALARM Action: RH Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/27/2010 13:02 Troy Quarterly De-Hu maintenance checks were performed. No problems to report. The first two sections of the ARRT plastic housings were re-gasketed. The oil pads on the carriage were re-oiled and the operation was checked. ARRT is still operating well. The HMI program for ARRT was modified such that RR's will be sent in when the water level is above 5 feet and will stop sending in RR's when the water level is below 5 feet. 10/27/2010 09:42 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_High Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading High level *** Tagname Value: Alarm Time: 27/10/2010 09:46:16, Current value: 1.000000 ALARM Action: Channel Level High +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/27/2010 09:34 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_High Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading High level *** Tagname Value: Alarm Time: 27/10/2010 09:38:14, Current value: 1.000000 ALARM Action: Channel Level High +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/27/2010 09:18 bcc_robo Content-description: Mail message body Event on Tagname: D1_Interlocks Status: ALM, Level: LVL *** Tagname Description: D1 interlock problem indication *** Tagname Value: Alarm Time: 27/10/2010 09:22:35, Current value: 1.000000 ALARM Action: D1 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/27/2010 09:18 bcc_robo Content-description: Mail message body Event on Tagname: D2_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D2 Auto Start Request due to Interlock problems with D1 *** Tagname Value: Alarm Time: 27/10/2010 09:22:35, Current value: 1.000000 ALARM Action: Interlock problem with D1 Start Request sent to D2 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/27/2010 09:18 bcc_robo Content-description: Mail message body Event on Tagname: D1_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D1's flow switch failed *** Tagname Value: Alarm Time: 27/10/2010 09:22:20, Current value: 1.000000 ALARM Action: D1 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/27/2010 09:08 bcc_robo Content-description: Mail message body Event on Tagname: D2_Interlocks Status: ALM, Level: LVL *** Tagname Description: D2 interlock problem indication *** Tagname Value: Alarm Time: 27/10/2010 09:12:53, Current value: 1.000000 ALARM Action: D2 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/27/2010 09:08 bcc_robo Content-description: Mail message body Event on Tagname: D1_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D1 Auto Start Request due to Interlock problems with D2 *** Tagname Value: Alarm Time: 27/10/2010 09:12:53, Current value: 1.000000 ALARM Action: Interlock problem with D2 Start Request sent to D1 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/27/2010 09:08 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 27/10/2010 09:12:38, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/19/2010 11:32 scottl Replaced Reader 02 due to issues with the processor card. The issue was that the card would not retain the configuration settings after the reader was reset or re-booted. Replaced battery and storage card on the processor board but still no fix. Called Alex at DF but he was not in the office at that time. Reader 01 is currently in place and operational. Reconfigured all of the settings in the reader and thoroughly tested as much as possible. The reader should auto tune when the channel waters up around Nov.8th. Will monitor. Archived 10 data files that were created during the time that the previous reader 02 was installed. Re-engaged the upload process on PC1. No other problems to report. 10/18/2010 10:26 Scott_Li Turned off file submission to PTAGIS until repairs can be made on the reader. This is scheduled for Tuesday, 19th. 10/18/2010 07:18 Scott_Li Reconfigured the reader this morning and reset the coil ID 01 along with suppressing some alarms and re-calibrating current and voltage. The reader processor card is having some issues. Suspect that the internal battery and or the internal storage card is corrupted. The reader will not retain settings after a reboot or random reset. Will discuss game plan to correct issues. More soon. 10/18/2010 06:29 bcc_robo Content-description: Mail message body Event on Tagname: Transceiver_PWR_Toggled Status: ALM, Level: LVL *** Tagname Description: Transceiver power was toggled *** Tagname Value: Alarm Time: 18/10/2010 06:33:51, Current value: 1.000000 ALARM Action: Transceiver power was toggled +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/17/2010 07:21 Troy Logged into PC2 again with the intention of setting the transceiver ID to 01 as the files have been rejected. On the Device Status page the Port is COM1 and the XCVR ID is 01. On the interrogation Data page the TT report on Port 01 with a Xcvr ID of 00. And on the Logging Data page the Port/ID if 00-01. I quit MM and opened the GUI and tried to set the reader ID to 01. I tried this 2 times and received a Run time error 6 each time. When I re- started MM the Port/ID was back to 01-1. PSMFC will continue to monitor, the Memory Battery may need replacing again...? 10/16/2010 12:15 Troy Remoted into PC2 , shutdown Minimon. Started the software that communicates with the transceiver and set the reader ID to 01. Started Minimon and exited. PCA'ed into PC1, stopped and started Minimon. Submitted the files. BCC10289.D1 was rejected but BCC10289.E1 was accepted. 10/16/2010 11:46 Troy Please ignore the previous pit event (email issues led me astray) PSMFC will look into changing the transceiver ID to 01 10/16/2010 11:40 Troy It appears there was a power outage. The file gap is inconsiquential as the channel is currently de-watered. 10/13/2010 12:29 scottl Swapped out Reader 03 and replaced it with 02. Reader 02 has a suspect mechanical tuning issue that will be addressed when the readers are sent back to DF for annual calibration etc.. Reconfigured all parameters and limits setup, calibrated current and voltage offsets. The reader will not detect testtags at the timed interval due to tuning. The capacitors plates are set with only 4700 pf so that if and when the channel is watered up the reader should go back into tune and detect PIT tags. 10/12/2010 08:58 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 11/10/2010 09:02:21, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/12/2010 08:57 bcc_robo Content-description: Mail message body Event on Tagname: D2_Auto Status: ALM, Level: LVL *** Tagname Description: D2 in Auto *** Tagname Value: Alarm Time: 11/10/2010 09:01:32, Current value: 1.000000 ALARM Action: D2 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/12/2010 08:57 bcc_robo Content-description: Mail message body Event on Tagname: D1_Auto Status: ALM, Level: LVL *** Tagname Description: D1 in Auto *** Tagname Value: Alarm Time: 11/10/2010 09:01:32, Current value: 1.000000 ALARM Action: D1 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/12/2010 08:57 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 11/10/2010 09:01:32, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/11/2010 08:58 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 11/10/2010 09:02:21, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/11/2010 08:57 bcc_robo Content-description: Mail message body Event on Tagname: D2_Auto Status: ALM, Level: LVL *** Tagname Description: D2 in Auto *** Tagname Value: Alarm Time: 11/10/2010 09:01:32, Current value: 1.000000 ALARM Action: D2 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/11/2010 08:57 bcc_robo Content-description: Mail message body Event on Tagname: D1_Auto Status: ALM, Level: LVL *** Tagname Description: D1 in Auto *** Tagname Value: Alarm Time: 11/10/2010 09:01:32, Current value: 1.000000 ALARM Action: D1 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/11/2010 08:57 bcc_robo Content-description: Mail message body Event on Tagname: Temperature_Low Status: ALM, Level: LVL *** Tagname Description: A Temperature transmitter is reading Low temp *** Tagname Value: Alarm Time: 11/10/2010 09:01:32, Current value: 1.000000 ALARM Action: Temperature High +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/11/2010 08:57 bcc_robo Content-description: Mail message body Event on Tagname: RH_Level_Low Status: ALM, Level: LVL *** Tagname Description: A RH transmitter is reading Low RH *** Tagname Value: Alarm Time: 11/10/2010 09:01:32, Current value: 1.000000 ALARM Action: RH Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/11/2010 08:57 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 11/10/2010 09:01:32, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/05/2010 15:01 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 04/10/2010 14:05:39, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/05/2010 15:01 bcc_robo Content-description: Mail message body Event on Tagname: D2_Auto Status: ALM, Level: LVL *** Tagname Description: D2 in Auto *** Tagname Value: Alarm Time: 04/10/2010 14:04:50, Current value: 1.000000 ALARM Action: D2 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/05/2010 15:01 bcc_robo Content-description: Mail message body Event on Tagname: D1_Auto Status: ALM, Level: LVL *** Tagname Description: D1 in Auto *** Tagname Value: Alarm Time: 04/10/2010 14:04:50, Current value: 1.000000 ALARM Action: D1 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/05/2010 15:01 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 04/10/2010 14:04:50, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/05/2010 07:27 Alan The 02:02:00 file gap on 10-4-2010 is inconsequential as the channel is dewatered. 10/04/2010 15:01 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 04/10/2010 14:05:39, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/04/2010 15:01 bcc_robo Content-description: Mail message body Event on Tagname: D2_Auto Status: ALM, Level: LVL *** Tagname Description: D2 in Auto *** Tagname Value: Alarm Time: 04/10/2010 14:04:50, Current value: 1.000000 ALARM Action: D2 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/04/2010 15:01 bcc_robo Content-description: Mail message body Event on Tagname: D1_Auto Status: ALM, Level: LVL *** Tagname Description: D1 in Auto *** Tagname Value: Alarm Time: 04/10/2010 14:04:50, Current value: 1.000000 ALARM Action: D1 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/04/2010 15:01 bcc_robo Content-description: Mail message body Event on Tagname: Temperature_Low Status: ALM, Level: LVL *** Tagname Description: A Temperature transmitter is reading Low temp *** Tagname Value: Alarm Time: 04/10/2010 14:04:50, Current value: 1.000000 ALARM Action: Temperature High +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/04/2010 15:01 bcc_robo Content-description: Mail message body Event on Tagname: RH_Level_Low Status: ALM, Level: LVL *** Tagname Description: A RH transmitter is reading Low RH *** Tagname Value: Alarm Time: 04/10/2010 14:04:50, Current value: 1.000000 ALARM Action: RH Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/04/2010 15:01 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 04/10/2010 14:04:50, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 09/03/2010 17:01 bcc_robo Content-description: Mail message body Event on Tagname: RH_Level_Low Status: ALM, Level: LVL *** Tagname Description: A RH transmitter is reading Low RH *** Tagname Value: Alarm Time: 02/09/2010 16:04:49, Current value: 1.000000 ALARM Action: RH Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 09/02/2010 17:01 bcc_robo Content-description: Mail message body Event on Tagname: RH_Level_Low Status: ALM, Level: LVL *** Tagname Description: A RH transmitter is reading Low RH *** Tagname Value: Alarm Time: 02/09/2010 16:04:49, Current value: 1.000000 ALARM Action: RH Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 09/01/2010 15:43 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 31/08/2010 14:46:07, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 09/01/2010 10:12 Troy ARRT PLC logic has been modified so that the ARRT unit will run one time a day at 10:00:00 while the channel is de-watered. Email has been disabled until the channel is watered up again. 09/01/2010 09:18 Troy The corner collector was de-watered at 14:46 on 08/31/2010. Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 31/08/2010 14:46:07, Current value: 1.000000 ALARM Action: Channel Level Low 09/01/2010 08:25 Troy The ARRT drive has been disabled due to the channel being de-watered for the season. 08/31/2010 15:43 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 31/08/2010 14:46:07, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/31/2010 15:42 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 31/08/2010 14:45:44, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/31/2010 15:42 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 31/08/2010 14:45:41, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/31/2010 15:42 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 31/08/2010 14:45:36, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/24/2010 16:31 Alan Remotely added the Biomark 23 MM tag to the country code list in both PC1 and PC2 registries. 08/24/2010 13:37 Scott_Li Added the Biomark 23 MM tag to the country code list in both pc1 and pc2 registries. Until we know if there is any significance or consistency to 3 or 4 digits to the right of the decimal, the dye code mask will be ommitted. This is easily enetered into the registry by a remote session. 08/17/2010 15:14 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 16/08/2010 14:17:40, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/16/2010 15:14 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 16/08/2010 14:17:40, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/16/2010 15:06 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 16/08/2010 14:09:36, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/16/2010 15:03 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 16/08/2010 14:06:31, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/16/2010 14:52 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 16/08/2010 13:55:14, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/16/2010 14:46 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 16/08/2010 13:49:15, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/16/2010 14:06 Scott_Li Jon Thomas reports that the COE will be testing the transfer switches in the North tower this afternoon. The outages will be brief, ~ 1 to 2 minutes in duration. These outages should not affect the BCC transceiver or DCP, but BO2 transceivers will obviously be down during this time. BO2 DCP should not be effected either. Scott Livingston PSMFC-PTAGIS 7103 W. Clearwater Ave. Suite H. Kennewick, Wa. 99336 Office: 509.735.2773 x.2 Mobile: 509.539.0894 Scottl@psmfc.org 07/28/2010 18:59 bcc_robo Content-description: Mail message body Event on Tagname: RH_Level_Low Status: ALM, Level: LVL *** Tagname Description: A RH transmitter is reading Low RH *** Tagname Value: Alarm Time: 27/07/2010 18:02:01, Current value: 1.000000 ALARM Action: RH Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/27/2010 18:59 bcc_robo Content-description: Mail message body Event on Tagname: RH_Level_Low Status: ALM, Level: LVL *** Tagname Description: A RH transmitter is reading Low RH *** Tagname Value: Alarm Time: 27/07/2010 18:02:01, Current value: 1.000000 ALARM Action: RH Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/27/2010 13:18 Troy Remotely installed logic that will ensure that ARRT tests at the top of the hour. At half past the hour 1800 seconds is written to the timer's accumulation register. This ensures that the unit will go at the top of the hour even after a power outage. This is important as the web page graphs will not work properly if the test is ran during the hour. 07/23/2010 03:16 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 22/07/2010 02:18:54, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/23/2010 03:15 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_OFF Status: ALM, Level: LVL *** Tagname Description: AC Power lost alarm *** Tagname Value: Alarm Time: 22/07/2010 02:16:43, Current value: 1.000000 ALARM Action: AC Power Off +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/22/2010 12:43 scottl On arrival, the manual read range was at -4 " from baseline. Adjusted C1 and the 2-4 Khz filter several times. Read range is now at + 6" from the baseline mark and am getting 5 to 8 hits per fish. used the ARRT in manaul mode when making adjustment, then turned to auto and cycled system several times. When ARRT is in auto mode, the RR now appears to be more consistent Installed telephone, no problems to report. 07/22/2010 03:16 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 22/07/2010 02:18:54, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/22/2010 03:15 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_OFF Status: ALM, Level: LVL *** Tagname Description: AC Power lost alarm *** Tagname Value: Alarm Time: 22/07/2010 02:16:43, Current value: 1.000000 ALARM Action: AC Power Off +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/20/2010 19:34 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_High Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading High level *** Tagname Value: Alarm Time: 19/07/2010 18:36:35, Current value: 1.000000 ALARM Action: Channel Level High +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/19/2010 19:34 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_High Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading High level *** Tagname Value: Alarm Time: 19/07/2010 18:36:35, Current value: 1.000000 ALARM Action: Channel Level High +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/15/2010 10:20 Troy The Semi-Annual HVAC and De-Hu checks were performed 07-15-2010. The timing was right to take the cover off and witness ARRT in motion. The travel is still smooth and there are no signs of abnormal wear. The De-Hu and HVAC check results will be recorded on the proper wiki page when time allows. No problems to report. 07/15/2010 09:50 bcc_robo Content-description: Mail message body Event on Tagname: D2_Interlocks Status: ALM, Level: LVL *** Tagname Description: D2 interlock problem indication *** Tagname Value: Alarm Time: 15/07/2010 08:53:08, Current value: 1.000000 ALARM Action: D2 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/15/2010 09:50 bcc_robo Content-description: Mail message body Event on Tagname: D1_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D1 Auto Start Request due to Interlock problems with D2 *** Tagname Value: Alarm Time: 15/07/2010 08:53:08, Current value: 1.000000 ALARM Action: Interlock problem with D2 Start Request sent to D1 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/15/2010 09:50 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 15/07/2010 08:52:53, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/15/2010 09:45 bcc_robo Content-description: Mail message body Event on Tagname: D1_Interlocks Status: ALM, Level: LVL *** Tagname Description: D1 interlock problem indication *** Tagname Value: Alarm Time: 15/07/2010 08:48:08, Current value: 1.000000 ALARM Action: D1 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/15/2010 09:45 bcc_robo Content-description: Mail message body Event on Tagname: D2_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D2 Auto Start Request due to Interlock problems with D1 *** Tagname Value: Alarm Time: 15/07/2010 08:48:08, Current value: 1.000000 ALARM Action: Interlock problem with D1 Start Request sent to D2 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/15/2010 09:45 bcc_robo Content-description: Mail message body Event on Tagname: D1_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D1's flow switch failed *** Tagname Value: Alarm Time: 15/07/2010 08:47:53, Current value: 1.000000 ALARM Action: D1 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/15/2010 08:29 scottl The cap position on the reader is at 409 which indicates that the caps are mostly all the way in. The water level for time being is fairly flat, if the water level drops any further the reader may not be able to effectively compensate. Will monitor. 07/09/2010 11:07 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 08/07/2010 10:09:28, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/08/2010 11:07 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 08/07/2010 10:09:28, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/08/2010 07:10 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 08/07/2010 06:13:04, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/08/2010 07:10 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 08/07/2010 06:12:38, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/27/2010 23:46 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_High Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading High level *** Tagname Value: Alarm Time: 26/06/2010 22:48:08, Current value: 1.000000 ALARM Action: Channel Level High +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/26/2010 23:46 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_High Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading High level *** Tagname Value: Alarm Time: 26/06/2010 22:48:08, Current value: 1.000000 ALARM Action: Channel Level High +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/23/2010 13:08 dARREN A site GMC was performed today (6-23-10). The transceiver was not adjusted all indicators show that the system is detecting very well. The ARRT manual test has the detection at a +5" and the water level is around 12'. The files on PC2 were archived. 06/23/2010 12:10 bcc_robo Content-description: Mail message body Event on Tagname: D2_Auto Status: ALM, Level: LVL *** Tagname Description: D2 in Auto *** Tagname Value: Alarm Time: 22/06/2010 11:12:41, Current value: 1.000000 ALARM Action: D2 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/23/2010 12:09 bcc_robo Content-description: Mail message body Event on Tagname: D1_Auto Status: ALM, Level: LVL *** Tagname Description: D1 in Auto *** Tagname Value: Alarm Time: 22/06/2010 11:10:39, Current value: 1.000000 ALARM Action: D1 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/22/2010 14:07 Troy At the site 06/22/2010 to determine why D2 had failed. Found that the Process Fan was making a terrible noise. Replaced the fan and D2 is running quiet again. I let the unit run while I made several changes to the PLC program in regards to RH control. The previous controls were hard on the contactor so a sequence was installed that keeps the heater on for x seconds if the rh is < than the rhct (RH Control Threshold). The heater is the shut off for 5 mins to allow the RH to stabalize. If the RH is still > rhct then the heater will come on of another x seconds (currently x = 60). If after 15 min's the rh is > rhct then the heater will come on until the RH is < rhct. Once the heater is < rhct the heater cannot come on again for another 5 mins. All systems appear to be working well at this time. 06/22/2010 13:10 bcc_robo Content-description: Mail message body Event on Tagname: WINTER_MODE_ON Status: ALM, Level: LVL *** Tagname Description: Winter Mode Selected *** Tagname Value: Alarm Time: 22/06/2010 12:12:12, Current value: 1.000000 ALARM Action: Winter Mode On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/22/2010 12:10 bcc_robo Content-description: Mail message body Event on Tagname: D2_Auto Status: ALM, Level: LVL *** Tagname Description: D2 in Auto *** Tagname Value: Alarm Time: 22/06/2010 11:12:41, Current value: 1.000000 ALARM Action: D2 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/22/2010 12:09 bcc_robo Content-description: Mail message body Event on Tagname: D1_Auto Status: ALM, Level: LVL *** Tagname Description: D1 in Auto *** Tagname Value: Alarm Time: 22/06/2010 11:10:39, Current value: 1.000000 ALARM Action: D1 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/22/2010 12:09 bcc_robo Content-description: Mail message body Event on Tagname: D2_Hand Status: ALM, Level: LVL *** Tagname Description: D2 in Hand *** Tagname Value: Alarm Time: 22/06/2010 11:10:18, Current value: 1.000000 ALARM Action: D2 in Hand +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/22/2010 12:09 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 22/06/2010 11:10:17, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/22/2010 12:08 bcc_robo Content-description: Mail message body Event on Tagname: D2_Return_Alarm Status: ALM, Level: LVL *** Tagname Description: D2 Return Air Damper failed *** Tagname Value: Alarm Time: 22/06/2010 11:10:17, Current value: 1.000000 ALARM Action: d2 return air damper failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/22/2010 12:08 bcc_robo Content-description: Mail message body Event on Tagname: D2_Intake_Alarm Status: ALM, Level: LVL *** Tagname Description: D2 Intake Air Damper failed *** Tagname Value: Alarm Time: 22/06/2010 11:10:17, Current value: 1.000000 ALARM Action: d2 intake damper failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/22/2010 12:08 bcc_robo Content-description: Mail message body Event on Tagname: D2_Hand Status: ALM, Level: LVL *** Tagname Description: D2 in Hand *** Tagname Value: Alarm Time: 22/06/2010 11:09:51, Current value: 1.000000 ALARM Action: D2 in Hand +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/22/2010 12:08 bcc_robo Content-description: Mail message body Event on Tagname: D2_Current_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's Current switch failed *** Tagname Value: Alarm Time: 22/06/2010 11:09:50, Current value: 1.000000 ALARM Action: D2 current switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/22/2010 12:08 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 22/06/2010 11:09:50, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/22/2010 12:08 bcc_robo Content-description: Mail message body Event on Tagname: D2_Return_Alarm Status: ALM, Level: LVL *** Tagname Description: D2 Return Air Damper failed *** Tagname Value: Alarm Time: 22/06/2010 11:09:50, Current value: 1.000000 ALARM Action: d2 return air damper failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/22/2010 12:08 bcc_robo Content-description: Mail message body Event on Tagname: D2_Intake_Alarm Status: ALM, Level: LVL *** Tagname Description: D2 Intake Air Damper failed *** Tagname Value: Alarm Time: 22/06/2010 11:09:50, Current value: 1.000000 ALARM Action: d2 intake damper failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/22/2010 11:28 bcc_robo Content-description: Mail message body Event on Tagname: D2_Hand Status: ALM, Level: LVL *** Tagname Description: D2 in Hand *** Tagname Value: Alarm Time: 22/06/2010 10:30:11, Current value: 1.000000 ALARM Action: D2 in Hand +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/22/2010 11:28 bcc_robo Content-description: Mail message body Event on Tagname: D2_Current_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's Current switch failed *** Tagname Value: Alarm Time: 22/06/2010 10:30:10, Current value: 1.000000 ALARM Action: D2 current switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/22/2010 11:28 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 22/06/2010 10:30:10, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/22/2010 11:28 bcc_robo Content-description: Mail message body Event on Tagname: D2_Return_Alarm Status: ALM, Level: LVL *** Tagname Description: D2 Return Air Damper failed *** Tagname Value: Alarm Time: 22/06/2010 10:30:10, Current value: 1.000000 ALARM Action: d2 return air damper failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/22/2010 11:28 bcc_robo Content-description: Mail message body Event on Tagname: D2_Intake_Alarm Status: ALM, Level: LVL *** Tagname Description: D2 Intake Air Damper failed *** Tagname Value: Alarm Time: 22/06/2010 10:30:10, Current value: 1.000000 ALARM Action: d2 intake damper failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/22/2010 10:58 bcc_robo Content-description: Mail message body Event on Tagname: D2_Hand Status: ALM, Level: LVL *** Tagname Description: D2 in Hand *** Tagname Value: Alarm Time: 22/06/2010 09:59:13, Current value: 1.000000 ALARM Action: D2 in Hand +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/22/2010 10:58 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 22/06/2010 09:59:12, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/22/2010 10:58 bcc_robo Content-description: Mail message body Event on Tagname: D2_Return_Alarm Status: ALM, Level: LVL *** Tagname Description: D2 Return Air Damper failed *** Tagname Value: Alarm Time: 22/06/2010 09:59:12, Current value: 1.000000 ALARM Action: d2 return air damper failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/22/2010 10:58 bcc_robo Content-description: Mail message body Event on Tagname: D2_Intake_Alarm Status: ALM, Level: LVL *** Tagname Description: D2 Intake Air Damper failed *** Tagname Value: Alarm Time: 22/06/2010 09:59:12, Current value: 1.000000 ALARM Action: d2 intake damper failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/22/2010 10:56 bcc_robo Content-description: Mail message body Event on Tagname: D2_Interlocks_Reset Status: ALM, Level: LVL *** Tagname Description: D2 Interlock Reset *** Tagname Value: Alarm Time: 22/06/2010 09:58:03, Current value: 1.000000 ALARM Action: D2 Interlock Reset Pressed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/22/2010 10:51 Troy Ran a RR test at full speed and the RR was -8. I checked the last 1000 lines of the ARRT web page and the value is there. It appears that the systems that produce the RR trend are working as they should. 06/22/2010 07:49 bcc_robo Content-description: Mail message body Event on Tagname: D2_Interlocks Status: ALM, Level: LVL *** Tagname Description: D2 interlock problem indication *** Tagname Value: Alarm Time: 21/06/2010 06:51:00, Current value: 1.000000 ALARM Action: D2 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/22/2010 07:49 bcc_robo Content-description: Mail message body Event on Tagname: D1_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D1 Auto Start Request due to Interlock problems with D2 *** Tagname Value: Alarm Time: 21/06/2010 06:51:00, Current value: 1.000000 ALARM Action: Interlock problem with D2 Start Request sent to D1 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/22/2010 07:48 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 21/06/2010 06:50:47, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/22/2010 07:48 bcc_robo Content-description: Mail message body Event on Tagname: D2_Current_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's Current switch failed *** Tagname Value: Alarm Time: 21/06/2010 06:50:45, Current value: 1.000000 ALARM Action: D2 current switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/21/2010 07:49 bcc_robo Content-description: Mail message body Event on Tagname: D2_Interlocks Status: ALM, Level: LVL *** Tagname Description: D2 interlock problem indication *** Tagname Value: Alarm Time: 21/06/2010 06:51:00, Current value: 1.000000 ALARM Action: D2 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/21/2010 07:49 bcc_robo Content-description: Mail message body Event on Tagname: D1_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D1 Auto Start Request due to Interlock problems with D2 *** Tagname Value: Alarm Time: 21/06/2010 06:51:00, Current value: 1.000000 ALARM Action: Interlock problem with D2 Start Request sent to D1 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/21/2010 07:48 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 21/06/2010 06:50:47, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/21/2010 07:48 bcc_robo Content-description: Mail message body Event on Tagname: D2_Current_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's Current switch failed *** Tagname Value: Alarm Time: 21/06/2010 06:50:45, Current value: 1.000000 ALARM Action: D2 current switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/17/2010 13:01 Alan A GMC was performed 6-17-2010. Upon arrival the cap plates were just below center and manual ARRT testing showed a read range of +7". The water level is 11.8'. No changes were made to the transceiver. The clocks on both PCs were set to within one second of atomic time. The temp folders on both PCs were cleared. Outstanding files on PC2 were archived. No problems found. 06/08/2010 14:13 Alan Work performed in the previous pitevent occurred on 6-8-2010. 06/08/2010 14:11 Alan A site GMC was performed 6-3-2010. Upon arrival the plates were rolled almost all the way in and manual ARRT testing gave results of +4". 500pf of coarse capacitance was added to center the cap plates. The transceiver was checked again checked manually using ARRT and showed a read range of +9" from the baseline. A spare transceiver was place in the PIT tag room. The clocks on both PCs were set to within one second of atomic time. The temp folders on both PCs were cleared. Outstanding files on PC2 were archived. No problems found. 06/04/2010 13:58 scottl When arrived on-site, the reader would not respond to course tuning. This is reason for the flat spot in the CAP graph and drastic change in current. After several attempts and reboots and not until the cap plates were manually rotated, the reader started to respond to cap adjustments. Will monitor reader over the weekend and respond if necessary. As of this mail message, the ARRT results , manually running in the tag is at + 5 inches. In auto mode, all results are relatively in the ball park with each other. 06/03/2010 12:24 Alan A site GMC was performed 6-3-2010. 500pf of coarse capacitance was added to center the cap plates. The transceiver was checked using the ARRT. The tag was walked into the field and found a read range of +4" from the baseline. The clocks on both PCs were set to within one second of atomic time. The temp folders on both PCs were cleared. Outstanding files on PC2 were archived. No problems found. 05/26/2010 13:02 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 26/05/2010 12:03:41, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 05/26/2010 12:49 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_OFF Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 26/05/2010 11:50:35, Current value: 0.000000 ALARM Action: AC Power Off +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 05/26/2010 12:35 Darren A site GMC was performed today 5-26-10. The transceiver was checked using the ARRT. I walked the tag into the field and found a read range of +4" from the baseline. There are an abundant amount of tags passing through the antenna at this time so the transceiver was not adjusted. 05/18/2010 10:35 Scott_Li Resending this memo for work that was completed on May 13th. Added the tag mask 3D9.1C67 to the Minimon tag filter on PC1 and PC2. This was done to accommodate for the fish released by IDFG Scott Livingston PSMFC-PTAGIS 7103 W. Clearwater Ave. Suite H. Kennewick, Wa. 99336 Office: 509.735.2773 x.2 Mobile: 509.539.0894 Scottl@psmfc.org 05/14/2010 08:48 Troy A quaterly check of the de-hu's was performed 05/13/2010. This resulted in some alarms which should be ignored. 05/13/2010 13:22 bcc_robo Content-description: Mail message body Event on Tagname: D1_Interlocks Status: ALM, Level: LVL *** Tagname Description: D1 interlock problem indication *** Tagname Value: Alarm Time: 13/05/2010 12:23:18, Current value: 1.000000 ALARM Action: D1 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 05/13/2010 13:22 bcc_robo Content-description: Mail message body Event on Tagname: D2_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D2 Auto Start Request due to Interlock problems with D1 *** Tagname Value: Alarm Time: 13/05/2010 12:23:18, Current value: 1.000000 ALARM Action: Interlock problem with D1 Start Request sent to D2 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 05/13/2010 13:21 bcc_robo Content-description: Mail message body Event on Tagname: D1_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D1's flow switch failed *** Tagname Value: Alarm Time: 13/05/2010 12:23:03, Current value: 1.000000 ALARM Action: D1 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 05/13/2010 13:12 bcc_robo Content-description: Mail message body Event on Tagname: D2_Interlocks Status: ALM, Level: LVL *** Tagname Description: D2 interlock problem indication *** Tagname Value: Alarm Time: 13/05/2010 12:13:46, Current value: 1.000000 ALARM Action: D2 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 05/13/2010 13:12 bcc_robo Content-description: Mail message body Event on Tagname: D1_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D1 Auto Start Request due to Interlock problems with D2 *** Tagname Value: Alarm Time: 13/05/2010 12:13:45, Current value: 1.000000 ALARM Action: Interlock problem with D2 Start Request sent to D1 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 05/13/2010 13:12 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 13/05/2010 12:13:31, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 05/03/2010 12:22 Alan When arrived, the RR as determined by ARRT, manually walking in the tag was at +1 inches. After tuning the 2-4 Khz filter, C2 drive current and a slight increase in the gain adjustment, RR is now at +2 inches again determined by ARRT. It should be noted that the water level has dropped this morning to 13', the water had risen to 14' which may have contributed to ARRT's reporting lower efficiencies. Archived outstanding files on PC2 and emptied both temp folders. Both clocks are within one second of atomic time. No problems found. 04/28/2010 10:46 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 27/04/2010 09:47:17, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/27/2010 16:26 Darren This message was received from site Bio Jonathan Rerecich this afternoon, The B2CC opened at about 1045, 4/27. 04/27/2010 10:46 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 27/04/2010 09:47:17, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/27/2010 08:13 Darren This message was received yesterday from site Bio Jonathan Rerecich. The B2CC closed today around 1330 due to a broken BGS cable and no boat protection. It is scheduled for repair tomorrow or Wednesday. 04/26/2010 13:33 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 26/04/2010 12:33:55, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/23/2010 12:48 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 22/04/2010 11:48:55, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/23/2010 08:04 Darren This message was received from Jonathan Rerecich yesterday. B2CC opened up at 1300 today 4/22. 04/22/2010 12:48 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 22/04/2010 11:48:55, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/21/2010 13:37 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 20/04/2010 12:38:01, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/21/2010 08:33 Darren I confirmed with site personnel Casey Welch that the bulkhead was not installed this morning due to high winds. They will attempt the removal when the winds subside. 04/20/2010 13:37 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 20/04/2010 12:38:01, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/20/2010 13:31 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 20/04/2010 12:32:31, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/20/2010 09:49 Darren I confirmed with site Bio Jonathan Rerecich that the channel was de-watered at 07:00 PDT this morning while work is being performed in the forebay. The channel will be out all day unless winds do not allow for the bulkhead removal, at which time the bulkhead will be removed tomorrow. 04/20/2010 07:10 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 20/04/2010 06:11:11, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/19/2010 12:16 scottl When arrived, the RR as determined by ARRT, manually walking in the tag was at -4 inches. After tuning the 2-4 Khz filter, C2 drive current and a slight increase in the gain adjustment, RR is now at +5 inches again determined by ARRT. We are using the ARRT as the primary tool when making the adjustments and getting away from manually placing a stick on the grate. Also, after adjustments were made, there appears to be more of a consistent read when ARRT is ran in auto mode. Periodically a stick placed on the grate will be used to sanity check the ARRT. The issue that was brought up with regards to the shakey drive signal amplitude is attributed to a setting in the digital scope.Attached the analog scope to the reader and the drive signal clear and crisp. 04/19/2010 10:04 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 19/04/2010 09:04:06, Current value: 0.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/19/2010 10:04 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_OFF Status: ALM, Level: LVL *** Tagname Description: AC Power lost alarm *** Tagname Value: Alarm Time: 19/04/2010 09:03:59, Current value: 0.000000 ALARM Action: AC Power Off +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/14/2010 12:21 Dave Re-enabled 3-hour site check for data availability. 04/14/2010 12:08 scottl RR when arrived was at -3" measured with a stick on the grate. ARRT was then manually brought into the field and RR was also at -3". After adjusting the 2-4 Khz and C2 cap and high pass filter, the final and best RR achievable was at the baseline mark. Water level is at ~14 ft, reader does not respond well at all to tuning in this condition. Also noticed that the drive signal amplitude was flunctuating and abit of noise was also observed. 04/11/2010 00:07 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_High Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading High level *** Tagname Value: Alarm Time: 09/04/2010 23:08:17, Current value: 1.000000 ALARM Action: Channel Level High +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/10/2010 17:34 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_OFF Status: ALM, Level: LVL *** Tagname Description: AC Power lost alarm *** Tagname Value: Alarm Time: 10/04/2010 16:34:37, Current value: 0.000000 ALARM Action: AC Power Off +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/10/2010 17:34 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 10/04/2010 16:34:37, Current value: 0.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/10/2010 00:07 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_High Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading High level *** Tagname Value: Alarm Time: 09/04/2010 23:08:17, Current value: 1.000000 ALARM Action: Channel Level High +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/08/2010 09:31 bcc_robo Content-description: Mail message body Event on Tagname: RH_Level_Low Status: ALM, Level: LVL *** Tagname Description: A RH transmitter is reading Low RH *** Tagname Value: Alarm Time: 08/04/2010 08:31:25, Current value: 1.000000 ALARM Action: RH Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/07/2010 12:16 scottl Checked read range prior to any adjustments, RR was at - 3" from baseline. Made course caps adjustments, adjusted C2 and 2-4 Khz, RR is now at +3"+4" as measured with a stick on the grate. Capacitor plates when arrived were 500 pf from the outside rails, after adjustements , capacitors are now centered. No other adjustments were made. Note that the reader was not plugged into the UPS power , moved to UPS power. 04/05/2010 14:07 Troy Set the ARRT to run it's automated test at the top of the hour vs the bottom of the hour. Reset the tests ran vs Tags read counts. The previous counts were 582 tests ran, 487 tags read. This was all performed at approximately 2:00 PDT. 04/02/2010 12:39 Darren A site GMC was performed today. The transceiver was tuned using both the ARRT and the test stick on the grate. Upon arrival it was noticed that the water level is at ~10ft. The read range on the test stick was a -3". ARRT was then walked in until the tag jsut started to read. The transciever C2 was adjusted and the 2-4kHz was adjsuted to maximize the reading efficiency. The current status of the test stick is +1" and the ARRT consistently reads the tag at +4.4" when it is walked in. The system was tuned at ~10ft. 03/30/2010 14:08 Troy Made some modifications to the "auto ack" logic for the water level and added the "auto ack" logic for the RH and Temperature. 03/30/2010 13:43 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 30/03/2010 12:43:41, Current value: 0.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/30/2010 07:17 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 30/03/2010 06:17:41, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/29/2010 16:06 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 29/03/2010 15:06:52, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/26/2010 07:12 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 25/03/2010 06:12:02, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/25/2010 07:11 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 25/03/2010 06:12:02, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/24/2010 13:09 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 23/03/2010 12:09:12, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/23/2010 15:23 Dave The scheduled times of operation referenced in the previous message are apparently reported in Pacific Daylight Time (PDT), and so with correspond with BCC detection and diagnostic data reported to PTAGIS between 6AM and noon (0600-1200) Pacific Standard Time. 03/23/2010 15:16 Darren Jonathan Rerecich reported that the B2CC was closed at 13:10 today (3-23-10). It appears that the channel will operate from 07:00-13:00 on a daily basis. 03/23/2010 13:09 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 23/03/2010 12:09:12, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/22/2010 12:31 scottl Re tuned the readers auto tune circuit to achieve maximum RR. The BCC stick was used to determine the RR and was at plus 1". Retuned the 2-4 Khz filter and achieved an additional 7 to 8 inches for a net of plus 9". Noticed that the ARRT is over traveling after the first tag is read and is not consistent. Will discuss the issue in the AM in order to determine what approach will be or what the actual effects of this over travel has on the accuracy of the ARRT RR data. 03/20/2010 13:38 bcc_robo Content-description: Mail message body Event on Tagname: RH_Level_Low Status: ALM, Level: LVL *** Tagname Description: A RH transmitter is reading Low RH *** Tagname Value: Alarm Time: 19/03/2010 12:38:48, Current value: 1.000000 ALARM Action: RH Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/19/2010 13:38 bcc_robo Content-description: Mail message body Event on Tagname: RH_Level_Low Status: ALM, Level: LVL *** Tagname Description: A RH transmitter is reading Low RH *** Tagname Value: Alarm Time: 19/03/2010 12:38:48, Current value: 1.000000 ALARM Action: RH Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/18/2010 14:47 Alan The USACE watered the channel up at ~0705 PST 3-17-2010. 03/18/2010 08:28 Alan During platform maintenance, PTAGIS Field Operations created two file gaps totaling one hour and 9 minutes on 3-16-2010. The gaps are inconsequential as the channel was dewatered during this time. 03/18/2010 08:09 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 17/03/2010 07:09:09, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/17/2010 17:44 Troy Found that the low level alarm was never acknowledge which caused the alarm to be ignored when the channel de-watered yesterday morning. I went into the PLC and provided an automatic ack. This was not done originally so that personnel would be aware of past alarms. Personnel will now have to examine the event log to see any past alarms. The clock of the web port was adjusted. FYI, when time allows the same provision should be made for all alarms that require an acknowlegement. 03/17/2010 08:05 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 17/03/2010 07:09:09, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/16/2010 10:54 Alan Via e-mail from site personnel: "The B2CC was closed at approximately 10:40 today, 16 March. It will be closed until further notice." 03/15/2010 11:35 Alan The BCC channel watered up for the season at 0745 3-14-2010. PSMFC was onsite to configure and tune the transceiver at 1615 3-14-2010. Initial benchmarks were made to show the read range at -7" from the mark on the grating using stick by hand. Initial ARRT benchmarks were at 60" on the ARRT readout (-8" from the mark on the grating). After further optimization this morning, the read range is at +5" from the mark on the grating using stick by hand. ARRT read range is now 47" on the ARRT readout (+5" from the mark on the grating). No problems to report. 03/15/2010 07:42 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 14/03/2010 06:45:23, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/14/2010 14:26 Dave I manually modified the FILE CLOSED time from "03:00" to "04:00" to circumvent a processing error associated with the shift from PST to PDT. 03/14/2010 07:42 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 14/03/2010 06:45:23, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/12/2010 11:51 bcc_robo Content-description: Mail message body Event on Tagname: D2_Auto Status: ALM, Level: LVL *** Tagname Description: D2 in Auto *** Tagname Value: Alarm Time: 11/03/2010 11:54:06, Current value: 1.000000 ALARM Action: D2 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/12/2010 11:51 bcc_robo Content-description: Mail message body Event on Tagname: D1_Auto Status: ALM, Level: LVL *** Tagname Description: D1 in Auto *** Tagname Value: Alarm Time: 11/03/2010 11:54:06, Current value: 1.000000 ALARM Action: D1 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/12/2010 11:51 bcc_robo Content-description: Mail message body Event on Tagname: Temperature_Low Status: ALM, Level: LVL *** Tagname Description: A Temperature transmitter is reading Low temp *** Tagname Value: Alarm Time: 11/03/2010 11:54:06, Current value: 1.000000 ALARM Action: Temperature High +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/12/2010 11:51 bcc_robo Content-description: Mail message body Event on Tagname: RH_Level_Low Status: ALM, Level: LVL *** Tagname Description: A RH transmitter is reading Low RH *** Tagname Value: Alarm Time: 11/03/2010 11:54:06, Current value: 1.000000 ALARM Action: RH Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/12/2010 11:51 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 11/03/2010 11:54:06, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/12/2010 00:44 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_OFF Status: ALM, Level: LVL *** Tagname Description: AC Power lost alarm *** Tagname Value: Alarm Time: 12/03/2010 00:47:05, Current value: 0.000000 ALARM Action: AC Power Off +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/12/2010 00:44 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 12/03/2010 00:47:04, Current value: 0.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/12/2010 00:36 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 12/03/2010 00:39:59, Current value: 0.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/12/2010 00:36 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_OFF Status: ALM, Level: LVL *** Tagname Description: AC Power lost alarm *** Tagname Value: Alarm Time: 12/03/2010 00:39:56, Current value: 0.000000 ALARM Action: AC Power Off +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/12/2010 00:31 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 12/03/2010 00:34:58, Current value: 0.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/12/2010 00:31 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_OFF Status: ALM, Level: LVL *** Tagname Description: AC Power lost alarm *** Tagname Value: Alarm Time: 12/03/2010 00:34:54, Current value: 0.000000 ALARM Action: AC Power Off +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/11/2010 11:51 bcc_robo Content-description: Mail message body Event on Tagname: D2_Auto Status: ALM, Level: LVL *** Tagname Description: D2 in Auto *** Tagname Value: Alarm Time: 11/03/2010 11:54:06, Current value: 1.000000 ALARM Action: D2 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/11/2010 11:51 bcc_robo Content-description: Mail message body Event on Tagname: D1_Auto Status: ALM, Level: LVL *** Tagname Description: D1 in Auto *** Tagname Value: Alarm Time: 11/03/2010 11:54:06, Current value: 1.000000 ALARM Action: D1 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/11/2010 11:51 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 11/03/2010 11:54:06, Current value: 0.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/11/2010 11:51 bcc_robo Content-description: Mail message body Event on Tagname: Temperature_Low Status: ALM, Level: LVL *** Tagname Description: A Temperature transmitter is reading Low temp *** Tagname Value: Alarm Time: 11/03/2010 11:54:06, Current value: 1.000000 ALARM Action: Temperature High +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/11/2010 11:51 bcc_robo Content-description: Mail message body Event on Tagname: RH_Level_Low Status: ALM, Level: LVL *** Tagname Description: A RH transmitter is reading Low RH *** Tagname Value: Alarm Time: 11/03/2010 11:54:06, Current value: 1.000000 ALARM Action: RH Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/11/2010 11:51 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 11/03/2010 11:54:06, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/11/2010 09:19 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 11/03/2010 09:22:34, Current value: 0.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/11/2010 09:14 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 11/03/2010 09:17:32, Current value: 0.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/11/2010 08:04 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 11/03/2010 08:07:00, Current value: 0.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/11/2010 08:04 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_OFF Status: ALM, Level: LVL *** Tagname Description: AC Power lost alarm *** Tagname Value: Alarm Time: 11/03/2010 08:06:53, Current value: 0.000000 ALARM Action: AC Power Off +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/11/2010 08:02 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_OFF Status: ALM, Level: LVL *** Tagname Description: AC Power lost alarm *** Tagname Value: Alarm Time: 11/03/2010 08:05:04, Current value: 0.000000 ALARM Action: AC Power Off +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/11/2010 08:02 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 11/03/2010 08:05:03, Current value: 0.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/11/2010 07:58 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 11/03/2010 08:01:26, Current value: 0.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/11/2010 07:52 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 11/03/2010 07:55:19, Current value: 0.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/10/2010 12:29 Scott_Li The SMP personnel at B2J was nice enough to reattach the network cable to PC1. All outstanding data files were archived and NOT submitted to PTAGIS due to data from the last tag test was infiltrated throughout those files. DCP was set to auto upload at 12.02.04 starting file 10069.G1. The reader drive signal is currently in standby mode but can be turned on at a moments notice. Per Jon R on the project, they are still awaiting for the official criteria to be handed down on when to open the channel. Jon will keep PTAGIS in the loop as to what transpires 03/09/2010 15:28 bcc_robo Content-description: Mail message body Event on Tagname: RH_Level_Low Status: ALM, Level: LVL *** Tagname Description: A RH transmitter is reading Low RH *** Tagname Value: Alarm Time: 08/03/2010 15:31:22, Current value: 1.000000 ALARM Action: RH Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/09/2010 08:23 Scott_Li Per Jon Thomas.. The Bonneville North Tower will be powered down this coming Thursday (3/11) morning for a couple of hours while one of our electricians installs a new ATS controller. It's doubtful that the outage will last longer than two hours. So, your Cascade Island Ladder and B2CC PIT Tag antenna facilities will be down for that period of time. Thanks, 03/08/2010 15:28 bcc_robo Content-description: Mail message body Event on Tagname: RH_Level_Low Status: ALM, Level: LVL *** Tagname Description: A RH transmitter is reading Low RH *** Tagname Value: Alarm Time: 08/03/2010 15:31:22, Current value: 1.000000 ALARM Action: RH Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/05/2010 11:30 bcc_robo Content-description: Mail message body Event on Tagname: D2_Auto Status: ALM, Level: LVL *** Tagname Description: D2 in Auto *** Tagname Value: Alarm Time: 04/03/2010 11:32:48, Current value: 1.000000 ALARM Action: D2 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/05/2010 11:30 bcc_robo Content-description: Mail message body Event on Tagname: D1_Auto Status: ALM, Level: LVL *** Tagname Description: D1 in Auto *** Tagname Value: Alarm Time: 04/03/2010 11:32:48, Current value: 1.000000 ALARM Action: D1 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/05/2010 11:29 bcc_robo Content-description: Mail message body Event on Tagname: Temperature_Low Status: ALM, Level: LVL *** Tagname Description: A Temperature transmitter is reading Low temp *** Tagname Value: Alarm Time: 04/03/2010 11:32:48, Current value: 1.000000 ALARM Action: Temperature High +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/05/2010 11:29 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 04/03/2010 11:32:48, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/04/2010 11:30 bcc_robo Content-description: Mail message body Event on Tagname: D2_Auto Status: ALM, Level: LVL *** Tagname Description: D2 in Auto *** Tagname Value: Alarm Time: 04/03/2010 11:32:48, Current value: 1.000000 ALARM Action: D2 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/04/2010 11:30 bcc_robo Content-description: Mail message body Event on Tagname: D1_Auto Status: ALM, Level: LVL *** Tagname Description: D1 in Auto *** Tagname Value: Alarm Time: 04/03/2010 11:32:48, Current value: 1.000000 ALARM Action: D1 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/04/2010 11:29 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 04/03/2010 11:32:48, Current value: 0.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/04/2010 11:29 bcc_robo Content-description: Mail message body Event on Tagname: Temperature_Low Status: ALM, Level: LVL *** Tagname Description: A Temperature transmitter is reading Low temp *** Tagname Value: Alarm Time: 04/03/2010 11:32:48, Current value: 1.000000 ALARM Action: Temperature High +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/04/2010 11:29 bcc_robo Content-description: Mail message body Event on Tagname: RH_Level_Low Status: ALM, Level: LVL *** Tagname Description: A RH transmitter is reading Low RH *** Tagname Value: Alarm Time: 04/03/2010 11:32:48, Current value: 1.000000 ALARM Action: RH Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/04/2010 11:29 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 04/03/2010 11:32:48, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/03/2010 13:19 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 03/03/2010 13:22:42, Current value: 0.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/02/2010 08:01 bcc_robo Content-description: Mail message body Event on Tagname: D2_Auto Status: ALM, Level: LVL *** Tagname Description: D2 in Auto *** Tagname Value: Alarm Time: 01/03/2010 08:04:10, Current value: 1.000000 ALARM Action: D2 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/02/2010 07:08 Alan BCC has been down for maintenance since 0630 3-1-2010. The channel is currently dewatered. 03/01/2010 08:01 bcc_robo Content-description: Mail message body Event on Tagname: D2_Auto Status: ALM, Level: LVL *** Tagname Description: D2 in Auto *** Tagname Value: Alarm Time: 01/03/2010 08:04:10, Current value: 1.000000 ALARM Action: D2 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/01/2010 07:59 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 01/03/2010 08:02:33, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/01/2010 07:59 bcc_robo Content-description: Mail message body Event on Tagname: D2_Hand Status: ALM, Level: LVL *** Tagname Description: D2 in Hand *** Tagname Value: Alarm Time: 01/03/2010 08:02:02, Current value: 1.000000 ALARM Action: D2 in Hand +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/01/2010 07:59 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 01/03/2010 08:02:01, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 02/28/2010 15:43 bcc_robo Content-description: Mail message body Event on Tagname: D2_Interlocks Status: ALM, Level: LVL *** Tagname Description: D2 interlock problem indication *** Tagname Value: Alarm Time: 28/02/2010 15:46:41, Current value: 1.000000 ALARM Action: D2 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 02/28/2010 15:43 bcc_robo Content-description: Mail message body Event on Tagname: D1_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D1 Auto Start Request due to Interlock problems with D2 *** Tagname Value: Alarm Time: 28/02/2010 15:46:41, Current value: 1.000000 ALARM Action: Interlock problem with D2 Start Request sent to D1 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 02/28/2010 15:43 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 28/02/2010 15:46:25, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 02/27/2010 21:56 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 27/02/2010 21:59:02, Current value: 0.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 02/27/2010 21:56 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_OFF Status: ALM, Level: LVL *** Tagname Description: AC Power lost alarm *** Tagname Value: Alarm Time: 27/02/2010 21:59:01, Current value: 0.000000 ALARM Action: AC Power Off +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 02/24/2010 19:16 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 24/02/2010 19:18:08, Current value: 0.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 02/24/2010 19:16 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_OFF Status: ALM, Level: LVL *** Tagname Description: AC Power lost alarm *** Tagname Value: Alarm Time: 24/02/2010 19:18:08, Current value: 0.000000 ALARM Action: AC Power Off +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 02/22/2010 02:13 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 22/02/2010 02:14:30, Current value: 0.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 02/22/2010 02:13 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_OFF Status: ALM, Level: LVL *** Tagname Description: AC Power lost alarm *** Tagname Value: Alarm Time: 22/02/2010 02:14:30, Current value: 0.000000 ALARM Action: AC Power Off +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 01/14/2010 09:13 Troy HVAC and De-humidifier inspections are complete. No problems to report. 01/14/2010 08:24 bcc_robo Content-description: Mail message body Event on Tagname: D2_Interlocks Status: ALM, Level: LVL *** Tagname Description: D2 interlock problem indication *** Tagname Value: Alarm Time: 14/01/2010 08:27:03, Current value: 1.000000 ALARM Action: D2 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 01/14/2010 08:24 bcc_robo Content-description: Mail message body Event on Tagname: D1_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D1 Auto Start Request due to Interlock problems with D2 *** Tagname Value: Alarm Time: 14/01/2010 08:27:03, Current value: 1.000000 ALARM Action: Interlock problem with D2 Start Request sent to D1 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 01/14/2010 08:24 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 14/01/2010 08:26:44, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 01/01/2010 00:00 PTOC_Bot Annual log file initiation for BCC #### End of Event Log for BCC ###