EVENT LOG FOR SITE BCC The first line of each entry contains a date/time stamp & who is reporting. The most recent entry is listed first. Date Time Who ---------- ----- -------- 11/01/2011 13:04 bcc_robo Content-description: Mail message body Event on Tagname: D2_Interlocks Status: ALM, Level: LVL *** Tagname Description: D2 interlock problem indication *** Tagname Value: Alarm Time: 01/11/2011 13:15:38, Current value: 1.000000 ALARM Action: D2 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 11/01/2011 13:04 bcc_robo Content-description: Mail message body Event on Tagname: D1_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D1 Auto Start Request due to Interlock problems with D2 *** Tagname Value: Alarm Time: 01/11/2011 13:15:38, Current value: 1.000000 ALARM Action: Interlock problem with D2 Start Request sent to D1 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 11/01/2011 13:04 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 01/11/2011 13:15:23, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 11/01/2011 12:58 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 01/11/2011 13:09:34, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 11/01/2011 12:56 bcc_robo Content-description: Mail message body Event on Tagname: D1_Interlocks Status: ALM, Level: LVL *** Tagname Description: D1 interlock problem indication *** Tagname Value: Alarm Time: 01/11/2011 13:07:43, Current value: 1.000000 ALARM Action: D1 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 11/01/2011 12:56 bcc_robo Content-description: Mail message body Event on Tagname: D2_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D2 Auto Start Request due to Interlock problems with D1 *** Tagname Value: Alarm Time: 01/11/2011 13:07:43, Current value: 1.000000 ALARM Action: Interlock problem with D1 Start Request sent to D2 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 11/01/2011 12:56 bcc_robo Content-description: Mail message body Event on Tagname: D1_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D1's flow switch failed *** Tagname Value: Alarm Time: 01/11/2011 13:07:28, Current value: 1.000000 ALARM Action: D1 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 11/01/2011 12:51 bcc_robo Content-description: Mail message body Event on Tagname: D2_Interlocks Status: ALM, Level: LVL *** Tagname Description: D2 interlock problem indication *** Tagname Value: Alarm Time: 01/11/2011 13:02:58, Current value: 1.000000 ALARM Action: D2 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 11/01/2011 12:51 bcc_robo Content-description: Mail message body Event on Tagname: D1_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D1 Auto Start Request due to Interlock problems with D2 *** Tagname Value: Alarm Time: 01/11/2011 13:02:58, Current value: 1.000000 ALARM Action: Interlock problem with D2 Start Request sent to D1 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 11/01/2011 12:51 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 01/11/2011 13:02:43, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 11/01/2011 12:44 bcc_robo Content-description: Mail message body Event on Tagname: D1_Interlocks Status: ALM, Level: LVL *** Tagname Description: D1 interlock problem indication *** Tagname Value: Alarm Time: 01/11/2011 12:56:15, Current value: 1.000000 ALARM Action: D1 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 11/01/2011 12:44 bcc_robo Content-description: Mail message body Event on Tagname: D2_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D2 Auto Start Request due to Interlock problems with D1 *** Tagname Value: Alarm Time: 01/11/2011 12:56:15, Current value: 1.000000 ALARM Action: Interlock problem with D1 Start Request sent to D2 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 11/01/2011 12:44 bcc_robo Content-description: Mail message body Event on Tagname: D1_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D1's flow switch failed *** Tagname Value: Alarm Time: 01/11/2011 12:56:00, Current value: 1.000000 ALARM Action: D1 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/24/2011 07:54 Troy Winter Mode was turned on due to high humidity which is causing the "control system" ie the contactor for the heater to work harder than it normally would. The channel is de-watered for the season and colder weather is coming. PSMFC will turn Winter Mode off prior to channel water up. 10/24/2011 07:52 bcc_robo Content-description: Mail message body Event on Tagname: WINTER_MODE_ON Status: ALM, Level: LVL *** Tagname Description: Winter Mode Selected *** Tagname Value: Alarm Time: 24/10/2011 08:04:01, Current value: 1.000000 ALARM Action: Winter Mode On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 09/28/2011 06:31 Scott_Li From: Thomas, Jon B NWP [mailto:Jon.B.Thomas@usace.army.mil] Sent: Tuesday, September 27, 2011 12:01 PM To: Don Warf; Scott Livingston Subject: B2CC Inspection (UNCLASSIFIED) Classification: UNCLASSIFIED Caveats: NONE Hello Don and Scott, We had an inspection team go into the B2CC looking for damage about 2 weeks ago--I believe it was Sept. 14th or so. We had to turn off your antenna prior to entry. The re-energizing of the antenna was forgotten for about a day. I remembered the next day to go back and double check my co-worker who had the clearance. We re-energized the antenna at that point. Sorry about the unannounced interruption of your antenna. There was a rush to get into the de-watered B2CC that morning for the inspection. Hopefully, we didn't interfere with anything that you were doing with the antenna at that time. Incidentally, according to one of the inspecting engineers, there was relatively little damage in the B2CC. Some erosion, but nowhere nearly as bad as some prior years. Repairs will be implemented during this de- watered period. Thanks and sorry about the notification failure.... --Jon (541) 374-4574 Classification: UNCLASSIFIED Caveats: NONE 09/02/2011 06:20 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 01/09/2011 06:30:55, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 09/01/2011 09:15 scottl The channel was dewatered for the season at approx. 0730 hrs. The transceiver will continue to operate in case the channel is watered up with out notice. Suppressed all transceiver limit alarms to avoid bloating files. 09/01/2011 06:48 Troy The PLC reports the channel to be de-watered. This was to be expected. The channel should remain down for the rest of the year. 09/01/2011 06:20 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 01/09/2011 06:30:55, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/30/2011 11:49 scottl Perfromed site GMC, water level is around 11 feet. Tweeked on C2 and the 2-4 Khz filter in order to increase the read range. Not much luck was had, spent approx. 1hr on tuning with little success. Reader is reading tags just fine but the RR is still at -8. It appears that this transceiver tuning circuit is having some issues, irratic behaviou was observed while tuning, 2-4 Khz signals look abit ratty and not well formed. Per John R. the cjannel will be dewatered for the year either 8/31 or 9/01/11. 08/11/2011 15:24 bcc_robo Content-description: Mail message body Event on Tagname: RH_Level_Low Status: ALM, Level: LVL *** Tagname Description: A RH transmitter is reading Low RH *** Tagname Value: Alarm Time: 10/08/2011 15:34:10, Current value: 1.000000 ALARM Action: RH Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/10/2011 15:24 bcc_robo Content-description: Mail message body Event on Tagname: RH_Level_Low Status: ALM, Level: LVL *** Tagname Description: A RH transmitter is reading Low RH *** Tagname Value: Alarm Time: 10/08/2011 15:34:10, Current value: 1.000000 ALARM Action: RH Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/10/2011 10:56 Alan A GMC was performed 8-10-2011. Upon arrival, manual ARRT tests are +8" to +9". Recent ARRT reporting has shown improved performance, no changes were made to the transceiver. Outstanding files on PC2 were archived. Both PCs are within one second of atomic time. No problems to report. 07/15/2011 11:06 Darren A site GMC was performed today (7-15-11). The transceiver was slightly adjusted so that the ARRT tag was read at +3-4" when manually walked into the field. No problems were discovered during this visit. 07/06/2011 11:37 Alan A GMC was performed 7-6-2011. Upon arrival, auto ARRT showed -7.5 to -16.7" and manual ARRT showed +6 to +9". Adjusted C3 slightly, auto ARRT showed -4.2 to +3.7" and manual ARRT showed +5 to +8". No problems to report. 06/30/2011 11:43 Darren PSMFC was on site today to check and adjust the transceiver. The transceiver was adjusted according to the procedure and the ARRT tag was tested by manually running ARRT into the field. I was consistently getting the tag to turn on around +3 - +4 of the baseline. The water level is around 12' currently. We will monitor the HPT trend to see if there is some improvement. 06/04/2011 02:54 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 03/06/2011 03:02:41, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/03/2011 11:42 Troy The M4/ARRT PC was locked waiting for a 'restore to previous state' acknowledgment. The PC was powered down and brought back up several times to ensure all was working properly. It was found that the PC was plugged into surge power only. The power was moved to PC2's UPS. ARRT was tested a few times and all seems to be in order. Walking ARRT in resulted in a +6 while running it in resulted in a -7.9 and minute later a +5.9. Too much programming needed to be done to try and test and text from BCC. Will try from B2J. 06/03/2011 02:54 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 03/06/2011 03:02:41, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/02/2011 21:15 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 01/06/2011 21:23:34, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/02/2011 07:37 Troy ARRT is currently flat lined because the M4 Utility machine did not recover from the power outage. ARRT is still running in on the hour and is being read but we have no way of recording the read range without M4. PSMFC will be onsite tomorrow to address this situation. 06/01/2011 21:15 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 01/06/2011 21:23:34, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 06/01/2011 21:14 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 01/06/2011 21:22:31, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 05/26/2011 13:00 Troy A site GMC was performed 05/26/2011. A manual walk in resulted in a +6.0 read range. All appears to be working well, no problems to report. 05/17/2011 10:51 Darren A site GMC was performed today (5-17-11). The ARRT tag was manually introduced into the field and was read at +4" from the baseline. No problems were discovered during this visit. 05/17/2011 00:44 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 16/05/2011 00:53:04, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 05/17/2011 00:43 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_OFF Status: ALM, Level: LVL *** Tagname Description: AC Power lost alarm *** Tagname Value: Alarm Time: 16/05/2011 00:51:50, Current value: 1.000000 ALARM Action: AC Power Off +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 05/16/2011 00:44 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 16/05/2011 00:53:04, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 05/16/2011 00:43 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_OFF Status: ALM, Level: LVL *** Tagname Description: AC Power lost alarm *** Tagname Value: Alarm Time: 16/05/2011 00:51:50, Current value: 1.000000 ALARM Action: AC Power Off +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/29/2011 09:17 Troy The PLC clock was adjusted to 15 seconds behind atomic time (04/28/2011) and the PLC program was modified to set the time back by 2 seconds on the 1st of every month at 08:00:12. This should ensure that ARRT does not run a test just prior to the hour which causes the ARRT data trend to look like a test was run every 1/2 hour instead of the actual every hour cycle that it is on. 04/26/2011 11:47 Troy A site GMC was performed 04/26/2011. ARRT was checked for performance and it was found that the "find tag" speed or the speed at which the unit travels in was set at a lower value than max speed. It was set to 100 should be 250. I returned the "find tag" speed to the max value of 250. This may effect the read range readings in the future, PSMFC will monitor. Quarterly De-hu checks were performed and no problems were found. 04/26/2011 11:25 bcc_robo Content-description: Mail message body Event on Tagname: D2_Interlocks Status: ALM, Level: LVL *** Tagname Description: D2 interlock problem indication *** Tagname Value: Alarm Time: 26/04/2011 11:33:09, Current value: 1.000000 ALARM Action: D2 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/26/2011 11:25 bcc_robo Content-description: Mail message body Event on Tagname: D1_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D1 Auto Start Request due to Interlock problems with D2 *** Tagname Value: Alarm Time: 26/04/2011 11:33:09, Current value: 1.000000 ALARM Action: Interlock problem with D2 Start Request sent to D1 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/26/2011 11:25 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 26/04/2011 11:32:54, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/26/2011 11:17 bcc_robo Content-description: Mail message body Event on Tagname: D2_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D2 Auto Start Request due to Interlock problems with D1 *** Tagname Value: Alarm Time: 26/04/2011 11:25:39, Current value: 1.000000 ALARM Action: Interlock problem with D1 Start Request sent to D2 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/26/2011 11:17 bcc_robo Content-description: Mail message body Event on Tagname: D1_Interlocks Status: ALM, Level: LVL *** Tagname Description: D1 interlock problem indication *** Tagname Value: Alarm Time: 26/04/2011 11:25:38, Current value: 1.000000 ALARM Action: D1 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/26/2011 11:17 bcc_robo Content-description: Mail message body Event on Tagname: D1_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D1's flow switch failed *** Tagname Value: Alarm Time: 26/04/2011 11:25:23, Current value: 1.000000 ALARM Action: D1 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/25/2011 08:17 Scott_Li Submitted the BCC11108.H1 and I1 files to cover the data gaps as indicated by the files load status report. These data gaps were created during fish and transceiver testing during the week of 4/18/11. 04/22/2011 10:00 Scott_Li Manually submitted all necessary data files to close the data gaps in the data set. There may be some small residual gaps that cannot be covered because the data does not exist. 04/20/2011 16:34 scottl Testing of tags have been completed. All delinquent files will be uploaded tomorrow when all unusable data can be purged. Data collection platform and BCC reader have been return to the normal operating state. 04/18/2011 16:47 scottl The system will be on and off line during the time that the OGEE transceiver is being tested. Along with this, the Xymon monitoring service will be periodically be RED due to the platform will be disconnected from the network. 04/15/2011 11:36 Alan Work has been completed. The data gap prior to noon 4-15-2011 will be filled on Monday. Operations are now back to normal. 04/13/2011 06:58 Alan The platform will be disconnected from the Internet periodically on 4/13, 14 & 15/2011. Data files will be submitted after the work is completed. 04/07/2011 09:24 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_High Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading High level *** Tagname Value: Alarm Time: 06/04/2011 09:31:32, Current value: 1.000000 ALARM Action: Channel Level High +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/06/2011 09:24 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_High Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading High level *** Tagname Value: Alarm Time: 06/04/2011 09:31:32, Current value: 1.000000 ALARM Action: Channel Level High +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/31/2011 11:18 Troy A memory card was installed in the ARRT HMI. This should allow for more 'local' trend data. Some future programming will be required to make this a reality. The RR was tested by walking ARRT in and it was read at +7.0 inches. The unit was ran in and read at -1.6 inches. The water level is at ~11 feet. No adjustments were made. 03/30/2011 14:02 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 29/03/2011 14:10:15, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/29/2011 14:02 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 29/03/2011 14:10:15, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/29/2011 10:17 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 29/03/2011 10:25:09, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/29/2011 10:17 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 29/03/2011 10:24:36, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/29/2011 08:29 Darren PSMFC was informed this morning that the corner collector channel is scheduled to be de-watered today (3-29-11) around 13:00. They are inspecting some trolley pipe. The channel is scheduled to water back up by the EOB today. 03/17/2011 09:03 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 16/03/2011 09:10:02, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/16/2011 09:09 Dave Per Dennis Schwartz, Portland District COE: The BON PH2 B2CC was closed this morning from 0730-0900 to remove a log that was jammed in our acoustic Trolley pipe at the B2CC area. The log was successfully removed by the BON rigging crew and the B2CC was reopened. 03/16/2011 09:03 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 16/03/2011 09:10:02, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/16/2011 07:04 Scott_Li Per Jon R. at the project, the channel maybe dewatered today for 3 to 4 hrs to clean debris from some screens. Will update with more information when available 03/16/2011 06:44 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 16/03/2011 06:51:18, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/16/2011 06:43 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 16/03/2011 06:50:46, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/15/2011 13:00 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 14/03/2011 13:07:52, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/15/2011 11:59 Scottl When arrived the read range according the ARRT was at - 11 to 15 : of RR. After adjusting C2, the read range is now at 0 to -4 RR. Water level is currently at 11.75 ft and is expected to rise with the current conditions. No problems to report. After the flows through the channel stabilize later in the year, the xcvr will more than likely need re tuned. 03/14/2011 13:09 Dave The BON PH2 Corner Collector watered up at 1PM PST on March 14, 2011. 03/14/2011 13:00 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 14/03/2011 13:07:52, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/11/2011 10:08 Dave Per the BON facility report #11-09: 4.6.2: B2CC was open from 0727 on 03 March until 1300 on 04 March for kelt study. 03/05/2011 13:04 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 04/03/2011 13:11:02, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/04/2011 13:04 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 04/03/2011 13:11:02, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/04/2011 13:04 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 04/03/2011 13:10:46, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/04/2011 07:52 Scott_Li The system watered up on Wednesday March 3rd, 2011. Its believed that the system will again be dewatered in a couple of days. The operational information for this system is vague at this time. Called the project for more information but got no answer. More info when available. See event log level transmitter data for exact time of water up. 03/04/2011 07:16 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 03/03/2011 07:23:06, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/03/2011 07:16 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 03/03/2011 07:23:06, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/02/2011 01:13 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 01/03/2011 01:20:10, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/01/2011 01:13 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 01/03/2011 01:20:10, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 02/27/2011 11:32 scottl Engaged the auto upload process, this was not done after the testing process at BCC 02/26/2011 10:29 scottl Timer tags are not firing due to misconfiguration. Also, there will be no data in the graphs until the reader is configured. 02/22/2011 07:18 Troy Winter Mode was turned off in lieu of tag testing. An outside RH/Temp transmitter was permanently installed on LT-01's housing. This will give us outside air RH and Temperature readings on the HMI and has not yet been configured to be sent to PTAGIS for trending. This will happen at a latter date. The RH was adjusted using the calibrator HM70. For future check's each probe should be place in a area where there is little to no wind to do the calibration check. 02/21/2011 11:23 Alan BCC is down for maintenance. The channel is dewatered, any file gaps are inconsequential. Expected return to service is the end of the day Thursday the 24th. 02/21/2011 01:26 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 20/02/2011 01:33:05, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 02/20/2011 01:26 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 20/02/2011 01:33:05, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 02/20/2011 01:21 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 20/02/2011 01:28:21, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 02/17/2011 18:49 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 16/02/2011 18:56:24, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 02/16/2011 18:49 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 16/02/2011 18:56:24, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 02/10/2011 15:46 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 09/02/2011 15:52:20, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 02/09/2011 15:46 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 09/02/2011 15:52:20, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 02/09/2011 07:33 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 09/02/2011 07:39:29, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 02/03/2011 07:33 Alan Centurylink reports an outage at Bonneville. ETA for internet connectivity is 9:00 today. 02/02/2011 02:52 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 01/02/2011 02:59:00, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 02/02/2011 02:48 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_OFF Status: ALM, Level: LVL *** Tagname Description: AC Power lost alarm *** Tagname Value: Alarm Time: 01/02/2011 02:53:25, Current value: 1.000000 ALARM Action: AC Power Off +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 02/01/2011 02:52 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 01/02/2011 02:59:00, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 02/01/2011 02:48 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 01/02/2011 02:54:28, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 02/01/2011 02:48 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_OFF Status: ALM, Level: LVL *** Tagname Description: AC Power lost alarm *** Tagname Value: Alarm Time: 01/02/2011 02:53:25, Current value: 1.000000 ALARM Action: AC Power Off +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 01/20/2011 07:56 bcc_robo Content-description: Mail message body Event on Tagname: Transceiver_PWR_Toggled Status: ALM, Level: LVL *** Tagname Description: Transceiver power was toggled *** Tagname Value: Alarm Time: 20/01/2011 08:01:52, Current value: 1.000000 ALARM Action: Transceiver power was toggled +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 01/20/2011 07:17 bcc_robo Content-description: Mail message body Event on Tagname: Transceiver_PWR_Toggled Status: ALM, Level: LVL *** Tagname Description: Transceiver power was toggled *** Tagname Value: Alarm Time: 20/01/2011 07:23:10, Current value: 1.000000 ALARM Action: Transceiver power was toggled +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 01/14/2011 13:03 Don_Warf All DSL connectivity is now restored. From: Don Warf Sent: Friday, January 14, 2011 9:40 AM To: 'pitevent@psmfc.org' Cc: Chris Matthews Subject: bo1,bo2,bo3,bo4,bcc,b2j,jdj,pro We are currently experiencing a DSL outage at these sites. Connectivity was lost at 9:02. Centurylink reports that the outage covers the states of Oregon and Washington. They estimate the outage will last until 11:00pm tonight. More soon. 01/14/2011 12:24 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 13/01/2011 12:30:35, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 01/14/2011 09:39 Don_Warf We are currently experiencing a DSL outage at these sites. Connectivity was lost at 9:02. Centurylink reports that the outage covers the states of Oregon and Washington. They estimate the outage will last until 11:00pm tonight. More soon. 01/13/2011 12:24 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 13/01/2011 12:30:35, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 01/13/2011 12:14 bcc_robo Content-description: Mail message body Event on Tagname: Temperature_Low Status: ALM, Level: LVL *** Tagname Description: A Temperature transmitter is reading Low temp *** Tagname Value: Alarm Time: 13/01/2011 12:20:37, Current value: 1.000000 ALARM Action: Temperature High +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 01/13/2011 11:44 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 13/01/2011 11:50:43, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 01/13/2011 11:43 bcc_robo Content-description: Mail message body Event on Tagname: D2_Auto Status: ALM, Level: LVL *** Tagname Description: D2 in Auto *** Tagname Value: Alarm Time: 13/01/2011 11:48:59, Current value: 1.000000 ALARM Action: D2 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 01/13/2011 11:43 bcc_robo Content-description: Mail message body Event on Tagname: D1_Auto Status: ALM, Level: LVL *** Tagname Description: D1 in Auto *** Tagname Value: Alarm Time: 13/01/2011 11:48:59, Current value: 1.000000 ALARM Action: D1 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 01/13/2011 11:43 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 13/01/2011 11:48:59, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 01/13/2011 11:43 bcc_robo Content-description: Mail message body Event on Tagname: Temperature_Low Status: ALM, Level: LVL *** Tagname Description: A Temperature transmitter is reading Low temp *** Tagname Value: Alarm Time: 13/01/2011 11:48:59, Current value: 1.000000 ALARM Action: Temperature High +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 01/13/2011 11:43 bcc_robo Content-description: Mail message body Event on Tagname: RH_Level_Low Status: ALM, Level: LVL *** Tagname Description: A RH transmitter is reading Low RH *** Tagname Value: Alarm Time: 13/01/2011 11:48:59, Current value: 1.000000 ALARM Action: RH Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 01/13/2011 11:43 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 13/01/2011 11:48:59, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 01/13/2011 11:43 bcc_robo Content-description: Mail message body Event on Tagname: WINTER_MODE_ON Status: ALM, Level: LVL *** Tagname Description: Winter Mode Selected *** Tagname Value: Alarm Time: 13/01/2011 11:48:59, Current value: 1.000000 ALARM Action: Winter Mode On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 01/13/2011 11:39 bcc_robo Content-description: Mail message body Event on Tagname: Temperature_Low Status: ALM, Level: LVL *** Tagname Description: A Temperature transmitter is reading Low temp *** Tagname Value: Alarm Time: 13/01/2011 11:45:05, Current value: 1.000000 ALARM Action: Temperature High +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 01/12/2011 13:26 Troy The heating and cooling system was set to off and consiquently the pit tag room was at 48 Deg F. The system was set to Auto. 01/12/2011 13:23 Troy The mystery to the transceiver not responding has been solved. The UPS that powers the device appeared to be on (power button light was lit)but was not. The power button was pushed and the transceiver came up as it should. Remote re-booting of the transceiver was tested via the web port and that is still operating as it should. The APC 1300 for the transceiver was in alarm condition the last time I was here and should be replaced on the next site visit to ensure reliability during the season. 01/12/2011 13:18 bcc_robo Content-description: Mail message body Event on Tagname: Transceiver_PWR_Toggled Status: ALM, Level: LVL *** Tagname Description: Transceiver power was toggled *** Tagname Value: Alarm Time: 12/01/2011 13:24:00, Current value: 1.000000 ALARM Action: Transceiver power was toggled +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 01/10/2011 07:40 Troy Notice the transceiver data has been missing since Saturday. Several attempts were made to remedy the situation to no avail. Minimon was stopped and started, no go. The transceiver power was remotely toggled, no go. PC1 was re-booted, no go. PC2 was confirmed to have the same framing errors. The GUI interface is also issue. PSMFC will be on site on Wednesday and will address at that time. PSMFC will also verify that the remote power toggle is still working. 01/10/2011 07:34 bcc_robo Content-description: Mail message body Event on Tagname: Transceiver_PWR_Toggled Status: ALM, Level: LVL *** Tagname Description: Transceiver power was toggled *** Tagname Value: Alarm Time: 10/01/2011 07:39:50, Current value: 1.000000 ALARM Action: Transceiver power was toggled +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 01/10/2011 07:31 bcc_robo Content-description: Mail message body Event on Tagname: Transceiver_PWR_Toggled Status: ALM, Level: LVL *** Tagname Description: Transceiver power was toggled *** Tagname Value: Alarm Time: 10/01/2011 07:36:43, Current value: 1.000000 ALARM Action: Transceiver power was toggled +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 01/10/2011 07:23 bcc_robo Content-description: Mail message body Event on Tagname: Transceiver_PWR_Toggled Status: ALM, Level: LVL *** Tagname Description: Transceiver power was toggled *** Tagname Value: Alarm Time: 10/01/2011 07:29:11, Current value: 1.000000 ALARM Action: Transceiver power was toggled +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 01/01/2011 00:00 PTOC_Bot Annual log file initiation for BCC #### End of Event Log for BCC ###