EVENT LOG FOR SITE GRA The first line of each entry contains a date/time stamp & who is reporting. The most recent entry is listed first. Date Time Who ---------- ----- -------- 12/31/2008 07:10 troy@bay 03:TestTagFailure,05:TestTagFailure: These transceivers will be addressed on the next site visit. 12/30/2008 07:21 troy@bay 03:TestTagFailure,05:TestTagFailure: These alarms will be addressed on the next site visit. 12/29/2008 07:55 alan@bay 03:TestTagFailure,05:TestTagFailure: These will be addressed during the next site visit. 12/28/2008 07:48 alan@bay 03:TestTagFailure: This will be addressed during the next site visit. 12/27/2008 08:18 alan@bay 03:TestTagFailure: This will be addressed during the next site visit. 12/26/2008 10:04 alan@bay 01:ReaderReset,02:RocketPortNoEOT,03:ReaderReset,03:TestTagFailure,04:Read erReset,05:ReaderReset,06:ReaderReset,07:ReaderReset,08:ReaderReset,12:Inp utSyncDetect,12:ReaderReset,14:InputSyncDetect,14:ReaderReset,16:InputSync Detect,16:ReaderReset,18:ReaderReset,22:ReaderReset,24:InputSyncDetect,24: ReaderReset,26:InputSyncDetect,26:ReaderReset,28:InputSyncDetect,28:Reader Reset: Alarms are the result of of a short power outage. AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/12/25 16:23:14 AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/12/25 16:23:33 12/25/2008 18:06 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/12/25 16:23:33 12/25/2008 18:06 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'OFF' to 'ON' at 2008/12/25 16:23:32 12/25/2008 18:06 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'OFF' to 'ON' at 2008/12/25 16:23:32 12/25/2008 18:06 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'ON' to 'OFF' at 2008/12/25 16:23:15 12/25/2008 18:06 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'ON' to 'OFF' at 2008/12/25 16:23:15 12/25/2008 18:06 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/12/25 16:23:14 12/25/2008 09:32 alan@bay 03:TestTagFailure: This will be addressed during the next site visit. 12/24/2008 07:41 alan@bay 03:TestTagFailure,06:TestTagFailure: These transceivers have drifted out of tune and will be addressed during the next site visit. 12/23/2008 07:13 alan@bay 03:TestTagFailure,06:TestTagFailure: These transceivers have drifet a bit out of tune. They will be tuned during the next site visit. 12/21/2008 08:18 darren@b 03:TestTagFailure,06:TestTagFailure: This site will be addressed during the next site visit. Some of the transceivers have drifted in tune but are still detecting PITtag's with high efficiency. 12/20/2008 08:57 darren@b 03:TestTagFailure,05:TestTagFailure,06:TestTagFailure,28:InputSyncDetect,2 8:ReaderReset: These alarms will be addressed during the next site visit. The ladder has detuned but is still detecting tags with high efficiency. 12/19/2008 08:54 darren@b 01:ReaderReset,02:ReaderReset,02:RocketPortNoEOT,03:ReaderReset,03:TestTag Failure,04:ReaderReset,05:ReaderReset,05:TestTagFailure,06:ReaderReset,06: TestTagFailure,07:ReaderReset,08:ReaderReset,08:RocketPortNoEOT,12:InputSy ncDetect,12:ReaderReset,14:InputSyncDetect,14:ReaderReset,16:InputSyncDete ct,16:ReaderReset,18:ReaderReset,22:ReaderReset,24:InputSyncDetect,24:Read erReset,26:InputSyncDetect,26:ReaderReset,28:InputSyncDetect,28:ReaderRese t: Alarms generated by a brief power outage. 12/18/2008 18:06 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/12/18 16:18:35 12/18/2008 18:06 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'OFF' to 'ON' at 2008/12/18 16:18:34 12/18/2008 18:06 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'OFF' to 'ON' at 2008/12/18 16:18:34 12/18/2008 18:06 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'ON' to 'OFF' at 2008/12/18 16:18:21 12/18/2008 18:06 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'ON' to 'OFF' at 2008/12/18 16:18:21 12/18/2008 18:06 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/12/18 16:18:20 12/18/2008 07:18 darren@b 03:TestTagFailure,05:TestTagFailure,06:TestTagFailure: These systems are experiencing some tuning issues. They are detecting PITtagf fish very well. PSMFC will address this issues during the next site visit. 12/17/2008 12:06 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/12/17 10:06:52 12/17/2008 12:06 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/12/17 10:06:43 12/17/2008 07:34 darren@b 03:TestTagFailure,06:TestTagFailure: These alarms will be investigated during the next site visit. 12/16/2008 08:07 darren@b 03:TestTagFailure,06:TestTagFailure: Alarms will be addressed during the next site visit. The systems may have drifted due to the extreme cold spell. 12/16/2008 07:15 darren@b 03:TestTagFailure,06:TestTagFailure: Alarms will be addressed during the next site visit. 12/15/2008 08:00 Scott_Li Edited the site operational status page to reflect the current status of the trap. 12/15/2008 07:20 darren@b 03:TestTagFailure,05:TestTagFailure,06:TestTagFailure: Alarms will be investigated and addressed during the next site visit. 12/14/2008 11:19 scottl@b 03:TestTagFailure: Noted 12/06/2008 09:31 troy@bay 03:TestTagFailure,05:TestTagFailure: These alarms will be looked into on the next site visit. 12/03/2008 12:05 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/12/03 10:51:12 12/03/2008 12:05 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/12/03 10:51:04 11/25/2008 09:05 DGE_Robo TrapGate (Trap) changed from 'OPEN' to 'CLOSED' at 2008/11/25 08:56:08 11/25/2008 09:05 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'OFF' to 'ON' at 2008/11/25 08:53:57 11/25/2008 09:05 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'OFF' to 'ON' at 2008/11/25 08:53:55 11/25/2008 09:05 DGE_Robo SByC_Enable (SBC) changed from 'ON' to 'OFF' at 2008/11/25 08:53:54 11/24/2008 11:46 Don_Warf Site NMFS personnel report that the trap will close for the season Wednesday November 26th at 9:00am PST. They report that the trap will be put back into operation on March 1st 2009. 11/19/2008 12:05 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/11/19 11:35:38 11/19/2008 12:05 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/11/19 11:35:29 11/07/2008 09:04 DGE_Robo B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2008/11/07 08:02:13 11/07/2008 09:04 DGE_Robo B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2008/11/07 08:02:11 11/06/2008 07:17 darren@b 01:ReaderReset,02:ReaderReset,03:ReaderReset,04:ReaderReset,05:ReaderReset ,06:ReaderReset,07:ReaderReset,08:ReaderReset: Alarms were generated by a brief site power outage. 11/05/2008 18:04 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/11/05 12:20:02 11/05/2008 18:04 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/11/05 12:20:01 11/05/2008 09:04 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/11/05 06:19:54 11/05/2008 09:04 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/11/05 06:19:55 11/05/2008 07:20 darren@b 01:ReaderReset,02:ReaderReset,03:ReaderReset,04:ReaderReset,05:ReaderReset ,06:ReaderReset,07:ReaderReset,08:ReaderReset,12:InputSyncDetect,12:InputS yncLost,12:ReaderReset,14:InputSyncDetect,14:InputSyncLost,14:ReaderReset, 16:InputSyncDetect,16:ReaderReset,18:ReaderReset,22:ReaderReset,24:InputSy ncDetect,24:InputSyncLost,24:ReaderReset,26:InputSyncDetect,26:InputSyncLo st,26:ReaderReset,28:InputSyncDetect,28:ReaderReset: It appears that there was a brief site wide power outage. 11/04/2008 09:04 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/11/04 06:46:43 11/04/2008 09:04 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/11/04 06:46:41 11/04/2008 09:04 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/11/04 06:46:41 11/04/2008 09:04 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/11/04 06:46:39 11/04/2008 09:04 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/11/04 06:33:27 11/04/2008 09:04 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/11/04 06:33:26 11/01/2008 10:04 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/11/01 06:12:06 11/01/2008 10:04 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/11/01 06:12:08 10/29/2008 08:38 troy@bay 05:TestTagFailure: Noted, PSMFC will monitor. 10/28/2008 07:38 darren@b 05:TestTagFailure: This system will need to investigated. It appears that the system has detuned slightly. The detection efficiencies have not been effected. 10/27/2008 16:04 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/10/27 14:13:02 10/27/2008 16:04 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/10/27 14:12:53 10/26/2008 09:37 troy@bay 05:TestTagFailure: PSMFC will monitor. 10/26/2008 09:15 Troy Noticed that the first file of the day was 1 hour shorter than normal, most likely due to the old DST dates. As a precaution, stopped and started MM on PC1 and PC2. Manually submitted GRA080300.103 and archived files on PC2. 10/25/2008 08:48 troy@bay 05:TestTagFailure: PSMFC will monitor. 10/23/2008 08:15 troy@bay 05:TestTagFailure: Noted 10/22/2008 07:48 darren@b 05:TestTagFailure: The system has slightly detuned. It will be addressed during the next site visit. 10/14/2008 16:25 Alan Manually pushed B2J08288.105, JDJ08288.105, GRA08288.105 and GRJ08288.105 to PTAGIS via PCA. 10/14/2008 07:41 darren@b 12:InputSyncDetect,12:InputSyncLost,14:InputSyncDetect,14:ReaderReset,24:I nputSyncDetect,24:ReaderReset,26:BadOscFreq,26:InputSyncDetect,26:InputSyn cLost,26:LowExcCurrent,28:LowExcCurrent: It appears that there was a 12second power outage that may have only affected the GRA trap. I did not see any reader resets on the ladder transceivers. 10/13/2008 16:04 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/10/13 14:57:25 10/13/2008 16:04 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/10/13 14:57:13 10/11/2008 08:08 darren@b SLC500:CommsFailure: The alarm is not uncommon. PSMFC will continue to monitor for future alarms. 10/04/2008 10:03 DGE_Robo A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2008/10/04 06:31:46 10/04/2008 10:03 DGE_Robo A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2008/10/04 06:31:44 10/04/2008 10:03 DGE_Robo B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2008/10/04 06:31:40 10/04/2008 10:03 DGE_Robo B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2008/10/04 06:31:38 10/01/2008 19:03 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/10/01 16:22:06 10/01/2008 19:03 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/10/01 16:22:05 10/01/2008 07:03 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/10/01 04:03:48 10/01/2008 07:03 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/10/01 04:03:47 09/25/2008 16:02 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/09/25 14:10:28 09/25/2008 16:02 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/09/25 14:10:20 09/23/2008 07:55 alan@bay 07:TestTagFailure: Transceiver 07 was experiencing some noise during this one-time alarm. It is reading PIT Tags with high efficiency. PTAGIS Field Operations will continue to monitor. 09/22/2008 10:29 Dave Updated database and map files to GRA08266.DB and GRA08266.MAP, respectively. The new configuration diverts tags in Action Codes 47 and 49 to the trap. Reset both PC clocks to within one second of each other and atomic time. Submitted patch file from PC2 to cover off-line interval on PC1; however, no activity was observed on PC2 while PC1 was off-line. Archived all outstanding PC2 data files. 09/18/2008 16:15 Darren The files were uploaded automatically at 16:00. 09/18/2008 15:13 Darren_C The firewall issues with the Portland District COE has finally been resolved. We were inadvertently blocked and Chris Sampier did not realize that we owned the whole block of addresses. He initially unblocked only one address which allowed us to PCA into the sites but we could not send any data to our servers. After he realized that we needed all the addresses we were able to get in and send the files via PTTP and PCA. We will monitor for the 16:00 upload to ensure that the sites are loading on their own and continue to watch fro any other aspects that may not be working. The sites appear to be functioning properly at this time. 09/18/2008 13:15 Darren_C The PCA connection has been resolved. Although we can get to the platforms we are still unable to send data or do any ftp sessions from the sites out. I am still working to resolve this issue. Dave Marvin has grabbed the outstanding files and uploaded them manually. Until this issue is fully resolved we not receive any files from the WW district sites. 09/18/2008 09:28 Darren_C I am currently in the process of trying to get in touch with Chris Sampier or Antonio Sanchez from the Portland District office to find out why the Walla Walla district sites have no communications. I am not able to get to any of the platforms and they are not able to send. I am not sure if this has anything to do with the line that was cut yesterday between Starbuck and Dayton but I will hopefully find out more when I speak with Portland District. 09/18/2008 07:34 Darren There appears to be some issue with the WW District network. I am currently trying to get in touch with Pete Peterson to verify what the problem may be. I will post more when the information becomes available. 09/15/2008 07:24 darren@b 01:ReaderReset: Alarm generated by a random reader reset. 09/12/2008 13:04 DGE_Robo B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2008/09/12 11:47:13 09/12/2008 13:04 DGE_Robo B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2008/09/12 11:47:11 09/12/2008 09:51 scottl@b 01:ReaderReset: noted 09/11/2008 16:04 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/09/11 14:53:08 09/11/2008 16:04 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/09/11 14:53:00 09/08/2008 11:18 Darren A site GMC was performed today (9-8-08). All the transceivers were checked for tuning, noise and detection ability, where applicable, The PC clocks are within 10 seconds of atomic time and each other. No problmes were found. 08/31/2008 10:03 DGE_Robo B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2008/08/31 06:35:54 08/31/2008 10:03 DGE_Robo B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2008/08/31 06:35:51 08/31/2008 10:03 DGE_Robo A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2008/08/31 06:35:47 08/31/2008 10:03 DGE_Robo A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2008/08/31 06:35:45 08/28/2008 19:03 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/08/28 15:37:33 08/28/2008 19:03 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/08/28 15:37:24 08/24/2008 10:03 DGE_Robo TrapGate (Trap) changed from 'CLOSED' to 'OPEN' at 2008/08/24 06:48:55 08/24/2008 10:03 DGE_Robo B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2008/08/24 06:38:26 08/24/2008 10:03 DGE_Robo B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2008/08/24 06:38:23 08/24/2008 10:03 DGE_Robo A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2008/08/24 06:38:19 08/24/2008 10:03 DGE_Robo A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2008/08/24 06:38:17 08/24/2008 10:03 DGE_Robo SByC_Enable (SBC) changed from 'OFF' to 'ON' at 2008/08/24 06:37:01 08/24/2008 10:03 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'ON' to 'OFF' at 2008/08/24 06:37:00 08/24/2008 10:03 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'ON' to 'OFF' at 2008/08/24 06:36:58 08/15/2008 08:24 alan@bay 06:ReaderReset: This alarm was generated by a random reader reset. PSMFC and Destron are aware of the problem. 08/14/2008 19:03 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/08/14 16:21:53 08/14/2008 19:03 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/08/14 16:21:52 08/13/2008 12:15 Alan A GMC was performed 8/13/2008. All transceivers were checked and tuned as necessary. The trap is de-watered. No bios are available to verify the reason. From the event log: TrapGate (Trap) changed from 'OPEN' to 'CLOSED' at 2008/08/08 06:40:52 Both PCs are five seconds behind atomic time. No problems found. 08/12/2008 07:03 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/08/12 04:23:04 08/12/2008 07:03 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/08/12 04:23:03 08/11/2008 12:10 Dave I reset the PC clocks to within one second of each other and atomic time. I archived all of the outstanding files on PC2, and any patch files on PC1 as necessary. 08/09/2008 10:03 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'OFF' to 'ON' at 2008/08/09 06:38:13 08/09/2008 10:03 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'OFF' to 'ON' at 2008/08/09 06:38:10 08/09/2008 10:03 DGE_Robo SByC_Enable (SBC) changed from 'ON' to 'OFF' at 2008/08/09 06:38:08 08/09/2008 10:03 DGE_Robo SByC_Enable (SBC) changed from 'OFF' to 'ON' at 2008/08/09 06:33:34 08/09/2008 10:03 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'ON' to 'OFF' at 2008/08/09 06:33:32 08/09/2008 10:03 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'ON' to 'OFF' at 2008/08/09 06:33:31 08/08/2008 10:03 DGE_Robo SByC_Enable (SBC) changed from 'ON' to 'OFF' at 2008/08/08 06:59:05 08/08/2008 10:03 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'OFF' to 'ON' at 2008/08/08 06:59:02 08/08/2008 10:03 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'OFF' to 'ON' at 2008/08/08 06:59:00 08/08/2008 10:03 DGE_Robo TrapGate (Trap) changed from 'OPEN' to 'CLOSED' at 2008/08/08 06:40:52 08/05/2008 04:03 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/08/05 01:24:39 08/05/2008 04:03 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/08/05 01:24:31 07/24/2008 16:47 Troy Site was not loading and could not get into GRA PC1. Thanks to John at the JFF for re-booting PC1. I was able to get in once PC1 was re-booted. Manually pushed GRA08206.105 and .106 to ptagis. Then pushed patch file GRA08206.207 to ptagis and archived the rest of the files on PC2. 07/24/2008 09:15 Troy After speaking with Ken the Delay Before Operate was changed from 50mSec to 0mSec. Hopefully this will improve the efficiency of the sample gates when they are used as diversion gates. 07/23/2008 15:56 Alan A GMC was performed 7/22/2008. All transceivers were checked and tuned as necessary. Both PCs are two seconds behind atomic time. No problems found. 07/23/2008 08:57 alan@bay 07:LowExcCurrent,07:Overrun: This alarm was generated by PTAGIS Field Operations personnel during a site visit. 07/22/2008 15:44 Dave Updated database and map files to GRA08204.DB and GRA08204.MAP, respectively. This configuration diverts to the trap all fall Chinook in Action Codes 81 and 84. The PC clocks are within one second of each other and three seconds of atomic time. 07/22/2008 04:05 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/07/22 02:08:47 07/22/2008 04:05 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/07/22 02:08:39 07/21/2008 13:09 Dave I updated the PC clocks, which were about 30 seconds slow, to within one second of each other and atomic time. 07/19/2008 13:03 DGE_Robo A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2008/07/19 10:28:48 07/19/2008 13:03 DGE_Robo A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2008/07/19 10:28:46 07/19/2008 13:03 DGE_Robo A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2008/07/19 10:28:05 07/19/2008 13:03 DGE_Robo A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2008/07/19 10:28:03 07/19/2008 13:03 DGE_Robo B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2008/07/19 10:27:53 07/19/2008 13:03 DGE_Robo B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2008/07/19 10:27:52 07/14/2008 13:04 DGE_Robo B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2008/07/14 10:59:32 07/14/2008 13:04 DGE_Robo B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2008/07/14 10:59:30 07/14/2008 13:04 DGE_Robo B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2008/07/14 10:58:17 07/14/2008 13:04 DGE_Robo B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2008/07/14 10:58:15 07/12/2008 10:04 DGE_Robo B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2008/07/12 06:50:54 07/12/2008 10:04 DGE_Robo B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2008/07/12 06:50:52 07/12/2008 10:04 DGE_Robo A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2008/07/12 06:50:48 07/12/2008 10:04 DGE_Robo A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2008/07/12 06:50:46 07/12/2008 10:04 DGE_Robo B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2008/07/12 06:49:46 07/12/2008 10:04 DGE_Robo B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2008/07/12 06:49:44 07/12/2008 10:04 DGE_Robo A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2008/07/12 06:49:41 07/12/2008 10:04 DGE_Robo A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2008/07/12 06:49:39 07/11/2008 13:03 DGE_Robo B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2008/07/11 11:01:28 07/11/2008 13:03 DGE_Robo B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2008/07/11 11:01:26 07/11/2008 13:03 DGE_Robo A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2008/07/11 11:01:15 07/11/2008 13:03 DGE_Robo A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2008/07/11 11:01:13 07/08/2008 09:33 Dave I programmatically "CLOSED" GRA08189.108, which was truncated by a scheduled power outage. The outage began at 21:47:30 on July 7, although the PCs ran on UPS power until after 23:15. Power was restored at 02:54:57 on July 8. There was no PIT tag detection capability during the entire duration of the power outage. 07/08/2008 07:01 DGE_Robo SByC_Enable (SBC) changed from 'OFF' to 'ON' at 2008/07/08 02:54:57 07/08/2008 07:01 DGE_Robo TrapGate (Trap) changed from 'CLOSED' to 'OPEN' at 2008/07/08 02:54:57 07/08/2008 07:01 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/07/08 02:54:57 07/08/2008 07:01 DGE_Robo SByC_Enable (SBC) changed from 'ON' to 'OFF' at 2008/07/07 21:47:31 07/08/2008 07:01 DGE_Robo TrapGate (Trap) changed from 'OPEN' to 'CLOSED' at 2008/07/07 21:47:31 07/08/2008 07:01 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/07/07 21:47:30 07/07/2008 12:33 Alan A GMC was performed 7/7/2008. All transceivers were checked and tuned as necessary. PC1 is 21 seconds behind atomic time, PC2 is nine seconds behind PC1. No problems found. 07/07/2008 10:11 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/07/07 08:45:56 07/07/2008 10:11 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/07/07 08:45:47 07/02/2008 16:34 Alan Manually pushed GRA08184.105 to PTAGIS via PCA. 06/27/2008 08:00 scottl@b 14:InputSyncDetect,14:ReaderReset: Noted 06/24/2008 11:07 PTOC_Bot Performed site GMC, no problems to report. PC clocks are within 3 seconds of each other and 9 seconds ahead of atomic time. 06/23/2008 13:05 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/06/23 09:30:23 06/23/2008 13:05 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/06/23 09:30:15 06/16/2008 17:52 Dave I reset the PC clocks, both of which were 30 seconds slow, to within one second of each other and atomic time. 06/16/2008 11:21 Troy A site GMC was performed 06/16/2008. All transceivers were checked for tune and adjustments made where needed. PC1 was 88 seconds behind atomic time and PC2 was 90 seconds behind atomic time. Both PC's were adjusted to within 1 second of atomic time and each other. The patch file on PC2 (GRA08168.205) was uploaded after (GRA08168.204) was manualy uploaded. The rest of the files on PC2 were archived. No problems to report. 06/10/2008 16:33 Alan Manually pushed GRA08162.104 & 105 to PTAGIS via PCA. 06/10/2008 07:56 darren@r 01:ReaderReset,02:ReaderReset,03:ReaderReset,04:ReaderReset,05:ReaderReset ,06:ReaderReset,07:ReaderReset,08:ReaderReset,12:InputSyncDetect,12:Reader Reset,14:InputSyncDetect,14:ReaderReset,16:InputSyncDetect,16:ReaderReset, 18:ReaderReset,22:InputSyncDetect,22:InputSyncLost,22:LowExcCurrent,22:Ove rrun,22:ReaderReset,22:TestTagFailure,24:BadOscFreq,24:InputSyncDetect,24: InputSyncLost,24:LowExcCurrent,24:ReaderReset,26:InputSyncDetect,26:InputS yncLost,26:LowExcCurrent,26:ReaderReset,28:InputSyncDetect,28:ReaderReset, 28:TestTagFailure: The alarms were generated by both PSMFC personnel and a site wide power outage. 06/09/2008 13:22 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/06/09 10:12:51 06/09/2008 13:22 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/06/09 10:12:49 06/09/2008 13:21 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/06/09 10:11:57 06/09/2008 13:20 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/06/09 10:11:56 06/09/2008 13:20 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/06/09 09:26:05 06/09/2008 13:19 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/06/09 09:26:03 06/09/2008 11:48 Troy A site GMC was performed 06/09/2008. All transceivers were checked for tune. 24 and 26 showed signs of a sync problem, most likely from 28. Reversed the sync order (22 is now the master) and all appears to be well. PC1 is 72 seconds behind atomic time and PC2 is 61 seconds behind atomic time. No other problems to report. 06/06/2008 08:47 alan@ree 01:ReaderReset,02:ReaderReset,03:ReaderReset,04:ReaderReset,05:ReaderReset ,06:ReaderReset,07:ReaderReset,08:ReaderReset,12:InputSyncDetect,12:Reader Reset,14:InputSyncDetect,14:ReaderReset,16:InputSyncDetect,16:ReaderReset, 18:ReaderReset,22:InputSyncDetect,22:ReaderReset,24:InputSyncDetect,24:Rea derReset,26:InputSyncDetect,26:ReaderReset,28:ReaderReset: Alarms resulted from a power outage. 06/05/2008 19:17 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/06/05 16:38:45 06/05/2008 19:16 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/06/05 16:38:44 06/05/2008 13:20 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/06/05 10:17:34 06/05/2008 13:20 DGE_Robo SByC_Enable (SBC) changed from 'OFF' to 'ON' at 2008/06/05 10:17:33 06/05/2008 13:19 DGE_Robo TrapGate (Trap) changed from 'CLOSED' to 'OPEN' at 2008/06/05 10:17:33 06/05/2008 13:19 DGE_Robo SByC_Enable (SBC) changed from 'ON' to 'OFF' at 2008/06/05 10:16:43 06/05/2008 13:18 DGE_Robo TrapGate (Trap) changed from 'OPEN' to 'CLOSED' at 2008/06/05 10:16:43 06/05/2008 13:18 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/06/05 10:16:42 06/05/2008 13:17 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/06/05 09:18:31 06/05/2008 13:17 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/06/05 09:18:30 06/02/2008 10:19 DGE_Robo B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2008/06/02 08:44:43 06/02/2008 10:18 DGE_Robo B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2008/06/02 08:44:41 06/02/2008 10:18 DGE_Robo A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2008/06/02 08:44:36 06/02/2008 10:17 DGE_Robo A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2008/06/02 08:44:33 06/02/2008 10:17 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'ON' to 'OFF' at 2008/06/02 08:43:39 06/02/2008 10:16 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'ON' to 'OFF' at 2008/06/02 08:43:37 06/02/2008 10:16 DGE_Robo SByC_Enable (SBC) changed from 'OFF' to 'ON' at 2008/06/02 08:43:36 06/02/2008 10:15 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'OFF' to 'ON' at 2008/06/02 07:38:34 06/02/2008 10:15 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'OFF' to 'ON' at 2008/06/02 07:38:33 06/02/2008 10:14 DGE_Robo SByC_Enable (SBC) changed from 'ON' to 'OFF' at 2008/06/02 07:38:31 06/02/2008 10:03 Alan A GMC was performed 6/2/2008. All transceivers were checked and tuned as necessary. PC1 is 44 seconds behind atomic time, PC2 is eight seconds behind PC1. No problems found. 05/30/2008 07:32 darren@r 01:ReaderReset,02:ReaderReset,03:ReaderReset,04:ReaderReset,05:ReaderReset ,06:ReaderReset,07:ReaderReset,08:ReaderReset,12:InputSyncDetect,12:InputS yncLost,14:InputSyncDetect,14:ReaderReset,16:InputSyncDetect,16:ReaderRese t,22:InputSyncDetect,22:ReaderReset,24:InputSyncDetect,24:ReaderReset,26:I nputSyncDetect,26:InputSyncLost,28:ReaderReset: Alarms were generated by a site wide power outage. 05/29/2008 16:18 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/05/29 14:42:09 05/29/2008 16:17 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/05/29 14:42:07 05/29/2008 16:16 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/05/29 13:42:34 05/29/2008 16:16 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/05/29 13:42:33 05/27/2008 13:35 Darren A site GMC was performed today (5-27-08). All transceivers were checked for tuning, noise and detection ability. The PC clocks are within 20 seconds of atomic time and 5 seconds of each other. No problems were discovered during this visit. 05/27/2008 08:53 darren@r 04:BadExcFreq,04:BadOscFreq,04:LowExcCurrent,12:InputSyncDetect,12:ReaderR eset: Clearing old alarms. 05/27/2008 01:24 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/05/26 23:24:28 05/27/2008 01:23 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/05/26 23:24:27 05/22/2008 13:08 scottl Performed site GMC (5-22-08). All transceivers were retuned and TT hits rates adjusted to 100 percent.PC clocks are within 4 seconds of each other and 21 seconds behind atomic time. 05/17/2008 04:23 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/05/17 02:41:53 05/17/2008 04:23 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/05/17 02:41:44 05/16/2008 09:15 alan@ree 22:BadOscFreq,22:InputSyncDetect,22:InputSyncLost,22:LowExcCurrent,24:BadO scFreq,24:InputSyncDetect,24:InputSyncLost,24:LowExcCurrent,26:InputSyncDe tect,26:InputSyncLost,26:ReaderReset: Some of these alarms were generated by a random reader reset on 26. The others were probably caused by a failing sync circuit on xcvr 24 or possibly xcvr 22. These xcvrs are reading timer tags and PIT Tags with good efficiency. PTAGIS Field Operations will be onsite next week to investigate further. 05/16/2008 08:47 alan@ree 07:LowExcCurrent: No apparent reason for this alarm. PTAGIS Field Operations will continue to monitor. 05/14/2008 13:12 Alan A GMC was performed 5/14/2008. All transceivers were checked and tuned as necessary. Transceiver 26 was replaced in an effort to determine the sync issues of late. For what it's worth, all transceivers were behaving normally upon arrival. PC1 had drifted 00:01:01 slow. The clocks on both PCs were set to within one second of atomic time. File GRA08135.207 was submitted from PC2 to fill the gap during PC1's downtime. No problems found. 05/14/2008 08:41 alan@ruf 22:InputSyncDetect,22:InputSyncLost,24:InputSyncDetect,24:InputSyncLost: This will be investigated during a GMC today. 05/11/2008 09:14 troy@ruf 22:InputSyncDetect,22:InputSyncLost,24:InputSyncDetect,24:InputSyncLost: Noted 05/10/2008 08:24 troy@ruf 22:InputSyncDetect,22:InputSyncLost,24:InputSyncDetect,24:InputSyncLost: These will be looked into on the next site visit. 05/09/2008 08:37 troy@ruf 22:InputSyncDetect,22:InputSyncLost,24:InputSyncDetect,24:InputSyncLost: Possible Random Reader Reset. PSMFC will monitor for future instances. 05/07/2008 08:21 troy@ruf 22:InputSyncDetect,22:InputSyncLost,24:InputSyncDetect,24:InputSyncLost: PSMFC will monitor these. These are in two different monitors so they will not beat on each other. 05/07/2008 08:19 troy@ruf 12:InputSyncDetect,12:InputSyncLost,14:InputSyncDetect,14:ReaderReset,16:I nputSyncDetect,16:ReaderReset: These alarms were generated during a transceiver replacement. 05/05/2008 13:58 Darren A site GMC was performed today (5-5-08). All transceivers were checked for tuning, noise and detection ability where applicable. The transceiver on antenna 16 was replaced because it had no sync out. No other problems were discovered during this visit. 05/05/2008 08:26 troy@ruf 22:InputSyncDetect,22:InputSyncLost,24:InputSyncDetect,24:InputSyncLost: This will be looked into on the next site visit. 05/04/2008 10:10 scottl@r 14:InputSyncLost,22:InputSyncDetect,22:InputSyncLost,24:InputSyncDetect,24 :InputSyncLost: This will be looked into next week during the GMC 05/03/2008 09:57 scottl@r 01:ReaderReset,02:ReaderReset,03:ReaderReset,04:ReaderReset,05:ReaderReset ,06:ReaderReset,07:ReaderReset,08:ReaderReset,12:InputSyncDetect,12:Reader Reset,14:InputSyncDetect,14:InputSyncLost,14:ReaderReset,16:InputSyncDetec t,16:ReaderReset,18:ReaderReset,22:InputSyncDetect,22:InputSyncLost,22:Rea derReset,24:InputSyncDetect,24:InputSyncLost,24:ReaderReset,26:InputSyncDe tect,26:ReaderReset,28:ReaderReset: Unscheduled power outage. 2008/05/03 03:25:41 --> set to 'ON' 2008/05/03 03:19:21 --> set to 'OFF 05/03/2008 07:15 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/05/03 03:25:22 05/03/2008 07:15 DGE_Robo SByC_Enable (SBC) changed from 'OFF' to 'ON' at 2008/05/03 03:25:21 05/03/2008 07:15 DGE_Robo TrapGate (Trap) changed from 'CLOSED' to 'OPEN' at 2008/05/03 03:25:21 05/03/2008 07:15 DGE_Robo SByC_Enable (SBC) changed from 'ON' to 'OFF' at 2008/05/03 03:19:01 05/03/2008 07:15 DGE_Robo TrapGate (Trap) changed from 'OPEN' to 'CLOSED' at 2008/05/03 03:19:01 05/03/2008 07:15 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/05/03 03:19:00 05/03/2008 04:16 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/05/03 01:57:18 05/03/2008 04:16 DGE_Robo SByC_Enable (SBC) changed from 'OFF' to 'ON' at 2008/05/03 01:57:16 05/03/2008 04:16 DGE_Robo TrapGate (Trap) changed from 'CLOSED' to 'OPEN' at 2008/05/03 01:57:16 05/03/2008 04:16 DGE_Robo SByC_Enable (SBC) changed from 'ON' to 'OFF' at 2008/05/03 01:57:16 05/03/2008 04:16 DGE_Robo TrapGate (Trap) changed from 'OPEN' to 'CLOSED' at 2008/05/03 01:57:16 05/03/2008 04:16 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/05/03 01:57:16 05/03/2008 04:16 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/05/03 01:56:59 05/03/2008 04:16 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/05/03 01:56:57 05/03/2008 04:16 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/05/03 01:56:15 05/03/2008 04:16 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/05/03 01:56:13 05/03/2008 04:16 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/05/03 01:05:17 05/03/2008 04:16 DGE_Robo SByC_Enable (SBC) changed from 'OFF' to 'ON' at 2008/05/03 01:05:16 05/03/2008 04:16 DGE_Robo TrapGate (Trap) changed from 'CLOSED' to 'OPEN' at 2008/05/03 01:05:16 05/03/2008 04:16 DGE_Robo SByC_Enable (SBC) changed from 'ON' to 'OFF' at 2008/05/03 01:05:16 05/03/2008 04:16 DGE_Robo TrapGate (Trap) changed from 'OPEN' to 'CLOSED' at 2008/05/03 01:05:16 05/03/2008 04:16 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/05/03 01:05:15 05/03/2008 04:16 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/05/03 01:00:52 05/03/2008 04:16 DGE_Robo SByC_Enable (SBC) changed from 'OFF' to 'ON' at 2008/05/03 01:00:50 05/03/2008 04:16 DGE_Robo TrapGate (Trap) changed from 'CLOSED' to 'OPEN' at 2008/05/03 01:00:50 05/03/2008 04:16 DGE_Robo SByC_Enable (SBC) changed from 'ON' to 'OFF' at 2008/05/03 01:00:14 05/03/2008 04:16 DGE_Robo TrapGate (Trap) changed from 'OPEN' to 'CLOSED' at 2008/05/03 01:00:14 05/03/2008 04:16 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/05/03 01:00:14 05/03/2008 04:16 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/05/03 00:58:51 05/03/2008 04:16 DGE_Robo SByC_Enable (SBC) changed from 'OFF' to 'ON' at 2008/05/03 00:58:50 05/03/2008 04:16 DGE_Robo TrapGate (Trap) changed from 'CLOSED' to 'OPEN' at 2008/05/03 00:58:50 05/03/2008 04:16 DGE_Robo SByC_Enable (SBC) changed from 'ON' to 'OFF' at 2008/05/03 00:58:08 05/03/2008 04:16 DGE_Robo TrapGate (Trap) changed from 'OPEN' to 'CLOSED' at 2008/05/03 00:58:08 05/03/2008 04:16 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/05/03 00:58:07 05/03/2008 04:16 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/05/03 00:22:17 05/03/2008 04:16 DGE_Robo SByC_Enable (SBC) changed from 'OFF' to 'ON' at 2008/05/03 00:22:16 05/03/2008 04:16 DGE_Robo TrapGate (Trap) changed from 'CLOSED' to 'OPEN' at 2008/05/03 00:22:16 05/03/2008 04:16 DGE_Robo SByC_Enable (SBC) changed from 'ON' to 'OFF' at 2008/05/03 00:21:13 05/03/2008 04:16 DGE_Robo TrapGate (Trap) changed from 'OPEN' to 'CLOSED' at 2008/05/03 00:21:13 05/03/2008 04:16 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/05/03 00:21:13 04/29/2008 11:02 Alan A GMC was performed 4/29/2008. All transceivers were checked and tuned as necessary. The clocks on both PCs are 14 seconds behind atomic time. No problems found. 04/29/2008 08:39 scottl@r 22:InputSyncDetect,22:InputSyncLost,24:InputSyncDetect,24:InputSyncLost: Problem noted, will monitor for chronic re occurrence. 04/28/2008 11:29 Alan Weekly stick test from Ken Thomas: PACIFIC STATES MARINE FISHERIES PIT Tag Database Stick Tag Summary Report By Site, Date and Coil (stick_tag_summary.rw) Apr 28, 2008 12:00:00 04/28/08 GRA Coil 12 10 tags 11 hits 04/28/08 GRA Coil 14 10 tags 10 hits 04/28/08 GRA Coil 16 10 tags 10 hits 04/28/08 GRA Coil 18 10 tags 11 hits 04/28/08 GRA Coil 22 10 tags 11 hits 04/28/08 GRA Coil 24 10 tags 10 hits 04/28/08 GRA Coil 26 10 tags 10 hits 04/28/08 GRA Coil 28 10 tags 11 hits First Stick: 28-apr-2008 06:39:34 First File: GRA08119.103 Last Stick: 28-apr-2008 06:45:12 Last File: GRA08119.103 GRA 04/28/08 Total: 84 04/28/2008 10:04 DGE_Robo A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2008/04/28 06:42:13 04/28/2008 10:04 DGE_Robo A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2008/04/28 06:41:12 04/28/2008 10:04 DGE_Robo B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2008/04/28 06:40:19 04/28/2008 10:04 DGE_Robo B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2008/04/28 06:39:18 04/28/2008 08:06 scottl@r 22:InputSyncDetect,22:InputSyncLost,24:InputSyncDetect,24:InputSyncLost: Problem noted. Not an issue at this time. 04/27/2008 08:36 darren@r 22:InputSyncDetect,22:InputSyncLost,24:InputSyncDetect,24:InputSyncLost: There does not appear to be any direct cause for the sync being lost. PSMFC will continue to monitor for future alarms. 04/25/2008 15:17 Dave I updated the map and database files to GRA08116.MAP and GRA08116.DB, respectively. This schema includes instructions to divert any Lemhi subbasin Chinook (AC-70) into the trap for radio-tagging. The PC clocks are within one second of each other and three six seconds of atomic time. 04/25/2008 14:47 DGE_Robo A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2008/04/25 12:08:52 04/25/2008 14:47 DGE_Robo A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2008/04/25 12:08:50 04/25/2008 14:47 DGE_Robo A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2008/04/25 12:08:45 04/25/2008 14:47 DGE_Robo A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2008/04/25 12:08:42 04/25/2008 14:47 DGE_Robo A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2008/04/25 12:08:28 04/25/2008 14:47 DGE_Robo A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2008/04/25 12:08:26 04/25/2008 14:47 DGE_Robo A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2008/04/25 12:08:23 04/25/2008 14:47 DGE_Robo A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2008/04/25 12:08:21 04/25/2008 13:02 DGE_Robo SByC_Enable (SBC) changed from 'OFF' to 'ON' at 2008/04/25 09:32:07 04/25/2008 13:02 DGE_Robo B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2008/04/25 09:30:01 04/25/2008 13:02 DGE_Robo B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2008/04/25 09:29:58 04/24/2008 07:54 darren@r 22:InputSyncDetect,22:InputSyncLost,SLC500:CommsFailure: These alarms were corrected during a site visit yesterday. 04/23/2008 13:02 DGE_Robo B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2008/04/23 10:57:05 04/23/2008 13:02 DGE_Robo A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2008/04/23 10:57:05 04/23/2008 13:02 DGE_Robo B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2008/04/23 10:57:04 04/23/2008 13:02 DGE_Robo A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2008/04/23 10:57:04 04/23/2008 13:02 DGE_Robo SByC_Enable (SBC) changed from 'ON' to 'OFF' at 2008/04/23 10:57:02 04/23/2008 13:02 DGE_Robo SByC_Enable (SBC) changed from 'OFF' to 'ON' at 2008/04/23 10:57:01 04/23/2008 13:02 DGE_Robo B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2008/04/23 10:56:58 04/23/2008 13:02 DGE_Robo B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2008/04/23 10:56:56 04/23/2008 13:02 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'ON' to 'OFF' at 2008/04/23 10:56:55 04/23/2008 13:02 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'OFF' to 'ON' at 2008/04/23 10:56:54 04/23/2008 13:02 DGE_Robo A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2008/04/23 10:56:51 04/23/2008 13:02 DGE_Robo A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2008/04/23 10:56:49 04/23/2008 13:02 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'ON' to 'OFF' at 2008/04/23 10:56:48 04/23/2008 13:02 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'OFF' to 'ON' at 2008/04/23 10:56:47 04/23/2008 13:02 DGE_Robo SByC_Enable (SBC) changed from 'ON' to 'OFF' at 2008/04/23 10:48:24 04/23/2008 13:02 DGE_Robo SByC_Enable (SBC) changed from 'OFF' to 'ON' at 2008/04/23 10:48:21 04/23/2008 13:02 DGE_Robo SByC_Enable (SBC) changed from 'ON' to 'OFF' at 2008/04/23 10:48:17 04/23/2008 13:02 DGE_Robo SByC_Enable (SBC) changed from 'OFF' to 'ON' at 2008/04/23 10:47:59 04/23/2008 13:02 DGE_Robo SByC_Enable (SBC) changed from 'ON' to 'OFF' at 2008/04/23 10:14:38 04/23/2008 13:02 DGE_Robo SByC_Enable (SBC) changed from 'OFF' to 'ON' at 2008/04/23 10:14:10 04/23/2008 13:02 DGE_Robo SByC_Enable (SBC) changed from 'ON' to 'OFF' at 2008/04/23 10:13:49 04/23/2008 13:02 DGE_Robo SByC_Enable (SBC) changed from 'OFF' to 'ON' at 2008/04/23 10:13:46 04/23/2008 13:02 DGE_Robo SByC_Enable (SBC) changed from 'ON' to 'OFF' at 2008/04/23 10:01:48 04/23/2008 13:02 DGE_Robo SByC_Enable (SBC) changed from 'OFF' to 'ON' at 2008/04/23 10:01:29 04/23/2008 12:19 Troy At the site 04/23/2008 to fix the communications issue between MM and the PLC. The PLC was sending messages to MM and MM was receiving them but divert commands from MM to the PLC were generating SLC COMM's Failures. Replaced the Line Driver on the platform and had the same issue. Replace the Line Driver on the PLC and the problem went away. Tested each switch position, temporarily changed the sample rate and then changed it back ( 4% and 4 Openings) and fired the gates from PC1 to verify that all PLC communication to and from MM work correctly. Everything checked out. As a result of this trouble shooting GRA has two new line drivers. The good used line driver will be returned to storage at the Kennewick office. All transceivers were checked for tune and adjustments made where needed. PC1 and PC2 are with in 2 seconds of each other and atomic time. 04/23/2008 07:50 darren@r 01:ReaderReset,02:ReaderReset,03:ReaderReset,04:ReaderReset,05:ReaderReset ,06:ReaderReset,07:ReaderReset,08:ReaderReset,12:InputSyncDetect,12:Reader Reset,14:InputSyncDetect,14:ReaderReset,16:InputSyncDetect,16:ReaderReset, 18:ReaderReset,22:InputSyncDetect,22:ReaderReset,24:InputSyncDetect,24:Rea derReset,26:InputSyncDetect,26:ReaderReset,28:ReaderReset,SLC500:CommsFail ure: The reader resets are a result of a power outage. The SLC CommsFailure will be addressed today by PSMFC personnel. 04/23/2008 01:02 DGE_Robo SByC_Enable (SBC) changed from 'ON' to 'OFF' at 2008/04/22 21:28:02 04/22/2008 17:02 DGE_Robo SByC_Enable (SBC) changed from 'OFF' to 'ON' at 2008/04/22 13:19:16 04/22/2008 15:11 DGE_Robo SByC_Enable (SBC) changed from 'ON' to 'OFF' at 2008/04/22 12:54:29 04/22/2008 15:11 DGE_Robo SByC_Enable (SBC) changed from 'OFF' to 'ON' at 2008/04/22 12:52:04 04/22/2008 15:10 Darren During a site GMC visit, it was discovered that the SbyC gate functionality at the trap was not working properly. In trouble shooting the PLC two file gaps were created on PC1 although a file was created on PC2 there were no PITtag detections during either process of rebooting PC1. PSMFC will be on site tomorrow to rectify the gate situation. Currently there is no SbyC activity at this site. 04/22/2008 08:13 darren@r SLC500:CommsFailure: Alarms will be addressed today during a site GMC. 04/21/2008 10:09 DGE_Robo B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2008/04/21 06:39:52 04/21/2008 10:09 DGE_Robo A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2008/04/21 06:39:52 04/21/2008 10:09 DGE_Robo B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2008/04/21 06:38:07 04/21/2008 10:09 DGE_Robo A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2008/04/21 06:37:07 04/21/2008 10:09 DGE_Robo B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2008/04/21 06:35:47 04/21/2008 10:09 DGE_Robo B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2008/04/21 06:34:02 04/21/2008 10:09 DGE_Robo B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2008/04/21 06:33:22 04/21/2008 10:09 DGE_Robo B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2008/04/21 06:31:31 04/21/2008 08:09 darren@r SLC500:CommsFailure: PSMFC will investigate this failure during the next site visit. This failure is not uncommon with the PLC and although it is called a failure the PITtag was probably diverted properly. 04/20/2008 15:41 Dave pcA'd in to both machines and restored MultiMon to full screen. Reset PC clocks to within one second of each other and atomic time. 04/20/2008 08:13 troy@ruf SLC500:CommsFailure: No obvious cause for these alarms. PSMFC will monitor for future occurances 04/19/2008 14:42 Dave I programmatically CLOSED the two files that were truncated by last night's scheduled power outages. As Troy noted, the actual outages occurred prior to the file truncations, since the computers stayed alive for a (short) while on the UPS/battery backup. The transceivers have no alternate power source, however, so there was no PIT tag detection activity during the entire duration of the outage. 04/19/2008 10:01 DGE_Robo TrapGate (Trap) changed from 'CLOSED' to 'OPEN' at 2008/04/19 06:20:07 04/19/2008 10:01 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'ON' to 'OFF' at 2008/04/19 06:14:27 04/19/2008 10:01 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'ON' to 'OFF' at 2008/04/19 06:14:27 04/19/2008 09:21 Troy These sites experienced the following power outages. Every thing appears to have come back up correctly. AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/04/18 20:05:43 AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/04/19 01:00:02 AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/04/19 03:02:39 AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/04/19 00:03:40 04/19/2008 07:01 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'OFF' to 'ON' at 2008/04/19 03:03:43 04/19/2008 07:01 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'OFF' to 'ON' at 2008/04/19 03:03:43 04/19/2008 07:01 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/04/19 03:03:43 04/19/2008 07:01 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'ON' to 'OFF' at 2008/04/19 01:01:14 04/19/2008 07:01 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'ON' to 'OFF' at 2008/04/19 01:01:14 04/19/2008 07:01 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/04/19 01:01:14 04/19/2008 07:01 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'OFF' to 'ON' at 2008/04/19 00:04:45 04/19/2008 07:01 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'OFF' to 'ON' at 2008/04/19 00:04:45 04/19/2008 07:01 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/04/19 00:04:45 04/19/2008 07:01 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'ON' to 'OFF' at 2008/04/18 20:04:27 04/19/2008 07:01 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'ON' to 'OFF' at 2008/04/18 20:04:27 04/19/2008 07:01 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/04/18 20:04:26 04/18/2008 16:07 DGE_Robo TrapGate (Trap) changed from 'OPEN' to 'CLOSED' at 2008/04/18 12:49:26 04/18/2008 16:07 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'OFF' to 'ON' at 2008/04/18 12:47:54 04/18/2008 16:07 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'OFF' to 'ON' at 2008/04/18 12:47:52 04/18/2008 09:26 Alan Weekly stick test from Ken Thomas PACIFIC STATES MARINE FISHERIES PIT Tag Database Stick Tag Summary Report By Site, Date and Coil (stick_tag_summary.rw) Apr 18, 2008 12:00:00 Page 1 04/14/08 GRA Coil 12 10 tags 10 hits 04/14/08 GRA Coil 14 10 tags 10 hits 04/14/08 GRA Coil 16 10 tags 13 hits 04/14/08 GRA Coil 18 10 tags 10 hits 04/14/08 GRA Coil 22 10 tags 10 hits 04/14/08 GRA Coil 24 10 tags 10 hits 04/14/08 GRA Coil 26 10 tags 10 hits 04/14/08 GRA Coil 28 10 tags 10 hits First Stick: 14-apr-2008 06:30:29 First File: GRA08105.103 Last Stick: 14-apr-2008 06:36:41 Last File: GRA08105.103 GRA 04/14/08 Total: 83 04/16/2008 11:39 troy@ruf 04:BadExcFreq,04:BadOscFreq,04:LowExcCurrent: These alarms were generated during a GMC. 04/15/2008 11:55 scottl The system clocks are within 4 seconds of each other and 1 min 5 seconds behind atomic time. 04/15/2008 11:52 scottl Performed site GMC, all transcievers were tuned and calibrated as necessary, xcvr 07, according to the TT report has had some exceptions in the recent past. Xcvr was slightly out of tune when arrived, TT hit rate is now at 100 percent. No other problems to report. 04/14/2008 10:04 DGE_Robo A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2008/04/14 06:37:21 04/14/2008 10:04 DGE_Robo A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2008/04/14 06:35:58 04/14/2008 10:04 DGE_Robo B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2008/04/14 06:31:49 04/14/2008 10:04 DGE_Robo B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2008/04/14 06:30:14 04/14/2008 08:24 troy@ruf 22:InputSyncDetect,22:InputSyncLost,24:InputSyncDetect,24:InputSyncLost: Possible Random Reset. PSMFC will monitor for future occurances. 04/13/2008 08:48 alan@ruf 22:InputSyncDetect,22:InputSyncLost,24:InputSyncDetect,24:InputSyncLost: This antenna group might be developing some sync issues, but is currently performing well. PTAGIS Field Operations will continue to monitor. 04/12/2008 08:30 alan@ruf 22:InputSyncDetect,22:InputSyncLost: No apparent reason for this one-time alarm. PTAGIS Field Operations will continue to monitor. 04/09/2008 09:58 scottl@r 01:ReaderReset,02:ReaderReset,03:ReaderReset,04:ReaderReset,05:ReaderReset ,06:ReaderReset,07:ReaderReset,08:ReaderReset,12:InputSyncDetect,12:Reader Reset,14:InputSyncDetect,14:ReaderReset,16:InputSyncDetect,16:ReaderReset, 18:ReaderReset,22:InputSyncDetect,22:ReaderReset,24:InputSyncDetect,24:Rea derReset,26:InputSyncDetect,26:ReaderReset,28:ReaderReset: Unscheduled Power outage 2008/04/08 15:46:00 --> set to 'ON' 2008/04/08 15:45:59 --> set to 'OFF' 2008/04/08 15:17:47 --> set to 'ON' 04/08/2008 19:04 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/04/08 15:46:00 04/08/2008 19:04 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/04/08 15:45:59 04/08/2008 19:04 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/04/08 15:17:47 04/08/2008 19:04 DGE_Robo TrapGate (Trap) changed from 'CLOSED' to 'OPEN' at 2008/04/08 15:17:46 04/08/2008 19:03 DGE_Robo TrapGate (Trap) changed from 'OPEN' to 'CLOSED' at 2008/04/08 15:10:22 04/08/2008 19:03 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/04/08 15:10:22 04/08/2008 19:03 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/04/08 15:04:33 04/08/2008 19:03 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/04/08 15:04:32 04/08/2008 16:03 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/04/08 14:57:02 04/08/2008 16:03 DGE_Robo TrapGate (Trap) changed from 'CLOSED' to 'OPEN' at 2008/04/08 14:57:01 04/08/2008 16:03 DGE_Robo TrapGate (Trap) changed from 'OPEN' to 'CLOSED' at 2008/04/08 14:57:00 04/08/2008 16:03 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/04/08 14:57:00 04/08/2008 16:03 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/04/08 14:53:47 04/08/2008 16:03 DGE_Robo TrapGate (Trap) changed from 'CLOSED' to 'OPEN' at 2008/04/08 14:53:45 04/08/2008 16:03 DGE_Robo TrapGate (Trap) changed from 'OPEN' to 'CLOSED' at 2008/04/08 14:53:20 04/08/2008 16:03 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/04/08 14:53:19 04/08/2008 08:23 alan@ruf 01:ReaderReset,02:ReaderReset,03:ReaderReset,04:ReaderReset,05:ReaderReset ,06:ReaderReset,07:ReaderReset,08:ReaderReset,12:InputSyncDetect,12:Reader Reset,14:InputSyncDetect,14:ReaderReset,16:InputSyncDetect,16:ReaderReset, 18:ReaderReset,22:InputSyncDetect,22:ReaderReset,24:InputSyncDetect,24:Rea derReset,26:InputSyncDetect,26:ReaderReset,28:ReaderReset: Alarms were created by short duration powere outage: AC_Power 'OFF' at 2008/04/08 03:25:36 AC_Power 'ON' at 2008/04/08 03:25:43 04/08/2008 07:03 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/04/08 03:25:43 04/08/2008 07:03 DGE_Robo TrapGate (Trap) changed from 'CLOSED' to 'OPEN' at 2008/04/08 03:25:42 04/08/2008 07:03 DGE_Robo TrapGate (Trap) changed from 'OPEN' to 'CLOSED' at 2008/04/08 03:25:37 04/08/2008 07:03 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/04/08 03:25:36 04/07/2008 10:03 DGE_Robo A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2008/04/07 07:00:05 04/07/2008 10:03 DGE_Robo A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2008/04/07 06:58:53 04/07/2008 10:03 DGE_Robo B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2008/04/07 06:57:48 04/07/2008 10:03 DGE_Robo B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2008/04/07 06:56:38 04/06/2008 09:16 Darren The new files for these sites was the 08097.104 files. I did not observe any PITtag detections during this process on either PC1 or PC2. 04/06/2008 09:13 Darren Multimon's internal clocks at these sites tried to adjust for daylight savings time by creating a four hour file at midnight. By following the Daylight Savings Time SOP I adjusted both PC1 and PC2 to get back to the right file durations. 04/04/2008 08:37 darren@r 01:ReaderReset,02:ReaderReset,03:ReaderReset,04:ReaderReset,05:ReaderReset ,06:ReaderReset,07:ReaderReset,08:ReaderReset,12:InputSyncDetect,12:Reader Reset,14:InputSyncDetect,14:ReaderReset,16:InputSyncDetect,16:ReaderReset, 18:ReaderReset,22:InputSyncDetect,22:InputSyncLost,22:ReaderReset,24:Input SyncDetect,24:InputSyncLost,24:ReaderReset,26:InputSyncDetect,26:InputSync Lost,26:ReaderReset,28:LowLithium,28:ReaderReset: It appears that the site may have experienced a brief power outage. 04/02/2008 13:05 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/04/02 10:57:41 04/02/2008 13:05 DGE_Robo TrapGate (Trap) changed from 'CLOSED' to 'OPEN' at 2008/04/02 10:57:40 04/02/2008 13:05 DGE_Robo TrapGate (Trap) changed from 'OPEN' to 'CLOSED' at 2008/04/02 10:52:09 04/02/2008 13:05 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/04/02 10:52:08 04/02/2008 08:04 darren@r 28:LowLithium: This alarm will be addressed today by PSMFC personnel. 04/01/2008 08:19 darren@r 02:LowExcCurrent,02:Overrun,22:BadOscFreq,22:InputSyncDetect,22:InputSyncL ost,22:LowExcCurrent,24:InputSyncDetect,24:InputSyncLost,26:InputSyncDetec t,26:InputSyncLost,28:LowLithium,28:ReaderReset: Most alarms were generated by PSMFC personnel during a site visit. I have tried to clear the "Low Lithium" alarm on transceiver 28 but it appears that the remote reader reset did not clear it from memory. PSMFC will monitor this and correct on the next site visit. 03/31/2008 12:26 darren@r 22:InputSyncDetect,22:InputSyncLost,26:InputSyncDetect,26:InputSyncLost,28 :ReaderReset: Alarms were generated while clearing the "lowLithium" alarm from transceiver 28 memory. 03/31/2008 12:12 Alan A GMC was performed 3/31/2008. All transceivers were checked and tuned as necessary. PC1 is 31 seconds behind atomic time, PC2 is five seconds behind PC1. No problems found. 03/31/2008 10:03 DGE_Robo A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2008/03/31 06:54:15 03/31/2008 10:03 DGE_Robo A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2008/03/31 06:52:48 03/31/2008 10:03 DGE_Robo B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2008/03/31 06:52:01 03/31/2008 10:03 DGE_Robo B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2008/03/31 06:50:17 03/31/2008 08:05 darren@r 05:TestTagFailure,28:LowLithium: The "Low Lithium" alarm will be addressed today via PCA. The tag failure will be monitored as there is no direct cause for this one failure. 03/28/2008 10:11 scottl@r 28:LowLithium: Reader needs reset in order to avoid these errors in future. 03/27/2008 09:12 scottl@r 28:LowLithium: Noted 03/27/2008 07:11 scottl@r 28:LowLithium: Problem noted, will reset reader in order to clear this alarm. 03/26/2008 07:40 darren@r 28:LowLithium: This alarm is in the status report. During the replacement of the batteries yesterday this unit must not have had the power cycled and will need to have this completed to eliminate this alarm from being reported. The battery is fine but the alarm is stuck in memory. 03/26/2008 07:21 darren@r 01:ReaderReset,02:ReaderReset,03:ReaderReset,04:ReaderReset,05:ReaderReset ,06:ReaderReset,07:ReaderReset,08:ReaderReset,12:InputSyncDetect,12:InputS yncLost,12:ReaderReset,14:InputSyncDetect,14:InputSyncLost,14:ReaderReset, 16:BadOscFreq,16:InputSyncDetect,16:InputSyncLost,16:LowExcCurrent,16:Read erReset,18:ReaderReset,22:InputSyncDetect,22:InputSyncLost,22:LowExcCurren t,22:ReaderReset,24:InputSyncDetect,24:InputSyncLost,24:ReaderReset,26:Inp utSyncDetect,26:InputSyncLost,26:ReaderReset,28:LowLithium,28:ReaderReset: These alarms were generated by PSMFC personnel during a site GMC and replacement of all the CPU Batteries. 03/25/2008 13:28 Darren A site GMC was performed today (3-25-08). All the transceivers were checked foor tuning, noise, and detection ability. The batteries on all the CPU boards were replaced. No ther problems were discovered. 03/25/2008 13:02 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/03/25 09:23:34 03/25/2008 13:02 DGE_Robo TrapGate (Trap) changed from 'CLOSED' to 'OPEN' at 2008/03/25 09:23:33 03/25/2008 13:02 DGE_Robo TrapGate (Trap) changed from 'OPEN' to 'CLOSED' at 2008/03/25 09:23:29 03/25/2008 13:02 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/03/25 09:23:29 03/24/2008 11:11 Darren Ken Thomas reports that 10 sticks were passed on both monitors at the adult trap with 100% detection. 03/24/2008 10:03 DGE_Robo B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2008/03/24 06:54:27 03/24/2008 10:03 DGE_Robo B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2008/03/24 06:54:24 03/24/2008 10:03 DGE_Robo A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2008/03/24 06:54:20 03/24/2008 10:03 DGE_Robo A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2008/03/24 06:54:18 03/24/2008 10:03 DGE_Robo A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2008/03/24 06:50:07 03/24/2008 10:03 DGE_Robo A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2008/03/24 06:48:53 03/24/2008 10:03 DGE_Robo B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2008/03/24 06:47:12 03/24/2008 10:03 DGE_Robo B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2008/03/24 06:45:48 03/24/2008 07:40 darren@r 04:BadExcFreq: This alarm will be investigated by PSMFC. 03/18/2008 16:35 Dave I was on-site for the almost-pre-season reset. Zipped the 2007 data files that had already been moved to "Previous Years' Data" on both PCs. Archived the 2007 counter summary file on PC1 and PC2. Cleared all buffered database, map, and counter data and configurations on PC1 and PC2. Reset the PC clocks to within one second of each other and atomic time. 03/18/2008 07:58 alan@ruf 12:InputSyncDetect,12:InputSyncLost,12:LowExcCurrent,12:ReaderReset,14:Inp utSyncDetect,14:InputSyncLost,14:LowExcCurrent,14:ReaderReset,16:BadOscFre q,16:InputSyncDetect,16:InputSyncLost,16:LowExcCurrent,16:ReaderReset,18:R eaderReset: These alarms were generated by PTAGIS Field Operations during a site visit. 03/17/2008 13:55 Alan A GMC was performed 3/17/2008. All transceivers were tuned. Transceiver 16 has developed sync issues. It was replaced and the failed unit will be taken back to Kennewick for repair. New UPS's were deployed on the platform. Files GRA08077.207 & 208 were submitted from PC2 to fill the gap created during PC1's downtime. The clocks on both PC's were set to within one second of atomic time. No other problems found. 03/17/2008 12:51 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/03/17 11:44:47 03/17/2008 12:51 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/03/17 11:44:39 03/16/2008 16:03 DGE_Robo A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2008/03/16 13:03:48 03/16/2008 16:03 DGE_Robo A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2008/03/16 13:03:45 03/15/2008 19:03 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/03/15 15:20:19 03/15/2008 19:03 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/03/15 15:20:18 03/10/2008 07:03 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/03/10 03:37:08 03/10/2008 07:03 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/03/10 03:37:08 03/08/2008 10:05 Troy Verfied with site personnel that the trap was brought into operation approximately 2 pm on 03/07/2008. A fish was seen today in the CEA report. 03/08/2008 09:03 DGE_Robo B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2008/03/08 08:28:31 03/08/2008 09:03 DGE_Robo B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2008/03/08 08:28:29 03/07/2008 15:03 DGE_Robo B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2008/03/07 14:07:27 03/07/2008 15:03 DGE_Robo B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2008/03/07 14:07:25 03/07/2008 15:03 DGE_Robo TrapGate (Trap) changed from 'CLOSED' to 'OPEN' at 2008/03/07 13:56:53 03/07/2008 15:03 DGE_Robo B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2008/03/07 13:46:51 03/07/2008 15:03 DGE_Robo B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2008/03/07 13:46:48 03/07/2008 15:03 DGE_Robo A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2008/03/07 13:46:46 03/07/2008 15:03 DGE_Robo A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2008/03/07 13:46:43 03/07/2008 15:03 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'ON' to 'OFF' at 2008/03/07 13:46:39 03/07/2008 15:03 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'ON' to 'OFF' at 2008/03/07 13:46:34 03/02/2008 09:03 DGE_Robo A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2008/03/02 06:08:11 03/02/2008 09:03 DGE_Robo B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2008/03/02 06:08:11 03/02/2008 09:03 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'OFF' to 'ON' at 2008/03/02 06:08:11 03/02/2008 09:03 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'OFF' to 'ON' at 2008/03/02 06:08:11 03/02/2008 09:03 DGE_Robo B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2008/03/02 06:08:01 03/02/2008 09:03 DGE_Robo A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2008/03/02 06:08:01 03/02/2008 09:03 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'ON' to 'OFF' at 2008/03/02 06:08:01 03/02/2008 09:03 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'ON' to 'OFF' at 2008/03/02 06:08:01 03/02/2008 00:03 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/03/01 23:49:04 03/02/2008 00:03 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/03/01 23:49:03 02/28/2008 07:09 darren@r 04:BadExcFreq,04:LowExcCurrent,05:TestTagFailure,12:ReaderReset,14:InputSy ncDetect,14:InputSyncLost,14:ReaderReset,16:InputSyncDetect,16:InputSyncLo st,16:ReaderReset,18:ReaderReset,22:InputSyncDetect,22:ReaderReset,24:Inpu tSyncDetect,24:ReaderReset,26:InputSyncDetect,26:ReaderReset,28:ReaderRese t: Alarms were generated by PSMFC personnel while performing a site GMC. 02/27/2008 14:03 Alan The previous pitevent refered only to the ladder, the trap is still dewatered. 02/27/2008 14:01 Alan GRA watered up the morning of 2/4/2008. It was then watered down the afternoon of 2/11/2008 for maintenance. It watered up again the morning of 2/21/2008. A GMC was performed 2-27-2008. All transceivers were checked and tuned. The hit rates were all adjusted to 100%. Data files from 2007 were archived in the Previous years' data\2007 folder on both PCs. PC1 is 23 seconds behind atomic time. PC2 is 19 seconds behind atomic time. No problems to report. 02/27/2008 12:02 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/02/27 10:33:36 02/27/2008 12:02 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'OFF' to 'ON' at 2008/02/27 10:33:35 02/27/2008 12:02 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'OFF' to 'ON' at 2008/02/27 10:33:35 02/27/2008 12:02 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'ON' to 'OFF' at 2008/02/27 10:33:34 02/27/2008 12:02 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'ON' to 'OFF' at 2008/02/27 10:33:34 02/27/2008 12:02 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/02/27 10:33:34 02/25/2008 07:16 troy@ruf 04:BadExcFreq,05:TestTagFailure: These alarms will be addressed on the next site visit. 02/24/2008 08:59 troy@ruf 04:BadExcFreq,05:TestTagFailure: These alarms will be looked into on the next site visit. 02/23/2008 09:21 troy@ruf 04:BadExcFreq,04:LowExcCurrent,05:TestTagFailure: These alarms will be addressed on the next site visit. 02/23/2008 09:21 Troy Noticed fish in the CEA report so I called the operator. Apperantly the ladder has been watered up since 02/04/08. The fish pumps ran for approximately 1 week and then were shut down due to problems. (shutdown on 2/11/08). The fish pumps were brought back on line yesterday 2/22/08 at 12:52 pm. The site status page will be updated. 02/19/2008 12:21 Dave I was able to establish a connection to PC2, and reset the default configuration files. I reset the PC2 clock to within 1 second of atomic time. 02/19/2008 10:51 Dave I reset the map and database files to GRA-GEN.MAP and GRA_GEN.DB, respectively, on PC1 only, as I could not connect to GRA-PC2. Cleared the counter files on PC1 and reset the clock to within 1 second of atomic time. 02/19/2008 00:05 DGE_Robo A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2008/02/18 22:35:26 02/19/2008 00:05 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'OFF' to 'ON' at 2008/02/18 22:35:26 02/19/2008 00:05 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'OFF' to 'ON' at 2008/02/18 22:35:26 02/19/2008 00:05 DGE_Robo B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2008/02/18 22:35:26 02/19/2008 00:05 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'ON' to 'OFF' at 2008/02/18 22:35:16 02/19/2008 00:05 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'ON' to 'OFF' at 2008/02/18 22:35:16 02/19/2008 00:05 DGE_Robo B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2008/02/18 22:35:16 02/19/2008 00:05 DGE_Robo A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2008/02/18 22:35:16 02/14/2008 15:05 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/02/14 14:35:31 02/14/2008 15:05 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'OFF' to 'ON' at 2008/02/14 14:35:30 02/14/2008 15:05 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'OFF' to 'ON' at 2008/02/14 14:35:30 02/14/2008 15:05 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'ON' to 'OFF' at 2008/02/14 14:29:26 02/14/2008 15:05 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'ON' to 'OFF' at 2008/02/14 14:29:26 02/14/2008 15:05 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/02/14 14:29:25 02/14/2008 15:05 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/02/14 12:07:08 02/14/2008 15:05 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'OFF' to 'ON' at 2008/02/14 12:07:07 02/14/2008 15:05 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'OFF' to 'ON' at 2008/02/14 12:07:07 02/14/2008 15:05 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'ON' to 'OFF' at 2008/02/14 12:02:51 02/14/2008 15:05 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'ON' to 'OFF' at 2008/02/14 12:02:51 02/14/2008 15:05 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/02/14 12:02:50 02/13/2008 03:06 DGE_Robo A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2008/02/13 02:40:38 02/13/2008 03:06 DGE_Robo B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2008/02/13 02:40:38 02/13/2008 03:06 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'OFF' to 'ON' at 2008/02/13 02:40:38 02/13/2008 03:06 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'OFF' to 'ON' at 2008/02/13 02:40:38 02/13/2008 03:06 DGE_Robo B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2008/02/13 02:40:28 02/13/2008 03:06 DGE_Robo A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2008/02/13 02:40:28 02/13/2008 03:06 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'ON' to 'OFF' at 2008/02/13 02:40:28 02/13/2008 03:06 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'ON' to 'OFF' at 2008/02/13 02:40:28 02/13/2008 03:06 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/02/13 01:28:07 02/13/2008 03:06 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'OFF' to 'ON' at 2008/02/13 01:28:06 02/13/2008 03:06 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'OFF' to 'ON' at 2008/02/13 01:28:06 02/13/2008 03:06 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'ON' to 'OFF' at 2008/02/13 01:27:49 02/13/2008 03:06 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'ON' to 'OFF' at 2008/02/13 01:27:49 02/13/2008 03:06 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/02/13 01:27:48 02/13/2008 03:06 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/02/13 01:17:45 02/13/2008 03:06 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'OFF' to 'ON' at 2008/02/13 01:17:44 02/13/2008 03:06 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'OFF' to 'ON' at 2008/02/13 01:17:44 02/13/2008 03:05 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'ON' to 'OFF' at 2008/02/13 01:17:25 02/13/2008 03:05 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'ON' to 'OFF' at 2008/02/13 01:17:25 02/13/2008 03:05 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/02/13 01:17:24 02/13/2008 03:05 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/02/13 01:01:14 02/13/2008 03:05 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'OFF' to 'ON' at 2008/02/13 01:01:13 02/13/2008 03:05 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'OFF' to 'ON' at 2008/02/13 01:01:13 02/13/2008 03:05 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'ON' to 'OFF' at 2008/02/13 01:00:39 02/13/2008 03:05 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'ON' to 'OFF' at 2008/02/13 01:00:39 02/13/2008 03:05 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/02/13 01:00:39 02/13/2008 03:05 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/02/13 00:45:29 02/13/2008 03:05 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'OFF' to 'ON' at 2008/02/13 00:45:28 02/13/2008 03:05 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'OFF' to 'ON' at 2008/02/13 00:45:28 02/13/2008 03:05 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'ON' to 'OFF' at 2008/02/13 00:44:51 02/13/2008 03:05 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'ON' to 'OFF' at 2008/02/13 00:44:51 02/13/2008 03:05 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/02/13 00:44:50 02/11/2008 06:05 DGE_Robo A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2008/02/11 04:03:02 02/11/2008 06:05 DGE_Robo B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2008/02/11 04:03:02 02/11/2008 06:05 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'OFF' to 'ON' at 2008/02/11 04:03:02 02/11/2008 06:05 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'OFF' to 'ON' at 2008/02/11 04:03:02 02/11/2008 06:05 DGE_Robo B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2008/02/11 04:02:52 02/11/2008 06:05 DGE_Robo A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2008/02/11 04:02:52 02/11/2008 06:05 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'ON' to 'OFF' at 2008/02/11 04:02:52 02/11/2008 06:05 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'ON' to 'OFF' at 2008/02/11 04:02:52 02/07/2008 06:05 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/02/07 05:56:20 02/07/2008 06:05 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/02/07 05:56:19 02/07/2008 06:05 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/02/07 05:43:41 02/07/2008 06:05 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/02/07 05:43:40 02/07/2008 06:05 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/02/07 05:29:29 02/07/2008 06:05 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/02/07 05:29:26 02/07/2008 06:05 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/02/07 05:24:45 02/07/2008 06:05 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/02/07 05:24:44 01/27/2008 03:05 DGE_Robo A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2008/01/27 01:40:08 01/27/2008 03:05 DGE_Robo B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2008/01/27 01:40:08 01/27/2008 03:05 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'OFF' to 'ON' at 2008/01/27 01:40:08 01/27/2008 03:05 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'OFF' to 'ON' at 2008/01/27 01:40:08 01/27/2008 03:05 DGE_Robo B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2008/01/27 01:39:58 01/27/2008 03:05 DGE_Robo A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2008/01/27 01:39:58 01/27/2008 03:05 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'ON' to 'OFF' at 2008/01/27 01:39:58 01/27/2008 03:05 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'ON' to 'OFF' at 2008/01/27 01:39:58 01/17/2008 09:04 DGE_Robo A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2008/01/17 06:48:09 01/17/2008 09:04 DGE_Robo B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2008/01/17 06:48:09 01/17/2008 09:04 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'OFF' to 'ON' at 2008/01/17 06:48:09 01/17/2008 09:04 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'OFF' to 'ON' at 2008/01/17 06:48:09 01/17/2008 09:04 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'ON' to 'OFF' at 2008/01/17 06:47:59 01/17/2008 09:04 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'ON' to 'OFF' at 2008/01/17 06:47:59 01/17/2008 09:04 DGE_Robo B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2008/01/17 06:47:59 01/17/2008 09:04 DGE_Robo A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2008/01/17 06:47:59 01/16/2008 09:04 DGE_Robo A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2008/01/16 07:18:21 01/16/2008 09:04 DGE_Robo B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2008/01/16 07:18:21 01/16/2008 09:04 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'OFF' to 'ON' at 2008/01/16 07:18:21 01/16/2008 09:04 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'OFF' to 'ON' at 2008/01/16 07:18:21 01/16/2008 09:04 DGE_Robo B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2008/01/16 07:18:11 01/16/2008 09:04 DGE_Robo A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2008/01/16 07:18:11 01/16/2008 09:04 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'ON' to 'OFF' at 2008/01/16 07:18:11 01/16/2008 09:04 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'ON' to 'OFF' at 2008/01/16 07:18:11 01/13/2008 12:04 DGE_Robo A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2008/01/13 09:02:57 01/13/2008 12:04 DGE_Robo B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2008/01/13 09:02:57 01/13/2008 12:04 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'OFF' to 'ON' at 2008/01/13 09:02:57 01/13/2008 12:04 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'OFF' to 'ON' at 2008/01/13 09:02:57 01/13/2008 12:04 DGE_Robo B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2008/01/13 09:02:47 01/13/2008 12:04 DGE_Robo A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2008/01/13 09:02:47 01/13/2008 12:04 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'ON' to 'OFF' at 2008/01/13 09:02:47 01/13/2008 12:04 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'ON' to 'OFF' at 2008/01/13 09:02:47 01/11/2008 07:27 darren@r 01:ReaderReset,02:LowExcCurrent,02:ReaderReset,02:RocketPortNoEOT,03:BadEx cFreq,03:BadOscFreq,03:LowExcCurrent,03:ReaderReset,03:RocketPortNoEOT,03: TestTagFailure,04:BadExcFreq,04:BadOscFreq,04:LowExcCurrent,04:ReaderReset ,04:RocketPortNoEOT,05:LowExcCurrent,05:RocketPortNoEOT,24:InputSyncDetect ,24:ReaderReset: The alarms on antennas 01-05 were caused by PSMFC personnel while returning the original analog boards. The boards had NPO capacitors installed by Destron-Fearing as an ECO. 01/07/2008 00:04 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/01/06 23:23:11 01/07/2008 00:04 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/01/06 23:23:10 01/04/2008 09:03 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2008/01/04 08:56:46 01/04/2008 09:03 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2008/01/04 08:56:45 01/03/2008 07:39 darren@r 03:TestTagFailure: The ladder was scheduled to be de-watered on 1/2/08. PSMFC is trying to confirm that this did happen, the exciter reports would indicate that it was de-watered. 01/01/2008 00:00 PTOC_Bot Annual log file initiation for GRA #### End of Event Log for GRA ###