EVENT LOG FOR SITE GRA The first line of each entry contains a date/time stamp & who is reporting. The most recent entry is listed first. Date Time Who ---------- ----- -------- 11/16/2013 07:02 rclark User: rclark. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Errors on 01 and 02 caused by short term noise event. Unknown cause for 1 time failure on 05. Will continue to monitor.. Error: 05: Virtual Tag Test Failed. 02: Virtual Tag Test Failed. 01: Virtual Tag Test Failed. 11/15/2013 07:12 rclark User: rclark. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This was caused by an automatic update of the NIC driver.. Error: GRA: The cluster connection to machine 192.168.114.15 failed.. 11/12/2013 14:34 rclark User: rclark. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Transceiver 07 was replaced. Errors on other transceivers caused by PSMFC personnel during site visit.. Error: 07: Noise Level High. 01: Noise Level High. 02: Noise Level High. 05: Noise Level High. 06: Noise Level High. 08: Noise Level High. 04: Reader Set To Master. 08: Reader Set To Master. 04: Sync. Input Not Present. 08: Sync. Input Not Present. 04: Tuning Capacitance High. 04: Tuning Capacitance Low. 04: Tuning Out Of Range. 11/12/2013 10:45 rclark On site 11/12/2013 to replace transceiver 07 which was giving erroneous noise and power supply voltage levels. Checked all transceivers for tuning and detection. There are no problems to reporrt. 11/12/2013 07:02 rclark User: rclark. Site: GRA. Antenna Group Name: WEIR 730. Antenna: 07. Comments: This transceiver will be replaced today.. Error: 07: Noise Level High 11/11/2013 07:57 dchase User: dchase. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: These alarms will be addressed tomorrow during a site visit.. Error: 02: Memory Low. 07: Noise Level High. 11/10/2013 06:12 dchase User: dchase. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Alarm noted and will be addressed during the next site GMC.. Error: 02: Memory Low. 11/09/2013 09:04 dchase User: dchase. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Alarm will be cleared on next site visit.. Error: 02: Memory Low. 11/08/2013 08:56 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: 07 will be addressed next week.. Error: 02: Virtual Tag Test Failed. 07: Antenna Tuning Failed. 07: Noise Level High. 07: Tuning Capacitance High. 07: Tuning Capacitance Low. 07: Tuning Out Of Range. 11/08/2013 08:22 dlwarf User: dlwarf. Site: GRA. Antenna Group Name: . Antenna: No errors were removed. Comments: Transceiver 07 has failed. The rest of the ladder is running at high efficiency. The unit will be replaced on the next site visit.. Error: 11/08/2013 08:22 dlwarf User: dlwarf. Site: GRA. Antenna: 07. Comments: Transceiver 07 has failed. The rest of the ladder is running at high efficiency. The unit will be replaced on the next site visit.. Message: show errors 11/07/2013 12:13 rclark Installed FS2020 transceivers at ladder 03 through 08. The M4 configuration was changed, exported, and sent via FTP to the server on PC1 and PC2. There was a short period of higher than normal noise when transceiver 03 was installed that lasted about 5 minutes. The tuning on 01 and 02 was checked. There are no problems to report. 11/07/2013 07:26 dchase User: dchase. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Alarms will be investigated during the next site GMC.. Error: 01: Noise Level High. 02: Noise Level High. 07: Test Tag Failed. 11/06/2013 07:41 dchase User: dchase. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Alarms will be investigated during the next site GMC.. Error: 02: Noise Level High. 01: Noise Level High. 11/04/2013 08:24 NTancret Updated M4 lookup file to include one additional tag for AC-15. 11/04/2013 07:27 dchase User: dchase. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No direct cause for this one time failure.. Error: 02: Virtual Tag Test Failed. 11/03/2013 08:07 Alan User: Alan. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: One-time alarm. Error: 02: Virtual Tag Test Failed. 10/31/2013 07:06 Alan User: Alan. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Onetime alarm. Error: 02: Noise Level High. 10/28/2013 09:28 rclark Performed site GMC on 10/28/2013. All transceivers were checked for tune and adjusted as needed. PC1 and PC2 are within 2 seconds of atomic time. There are no problems to report. 10/25/2013 16:25 NTancret Updated M4 lookup file to include additional tag codes for AC-15. 10/24/2013 14:12 rclark User: rclark. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Remotely performed antenna full tune.. Error: 01: Tuning Capacitance High. 01: Tuning Out Of Range. 10/22/2013 09:20 rclark Performed site GMC on 10/22/2013. All transceivers were checked for tune and adjusted as needed. M4 PC1 and PC2 are within 5 seconds of atomic time. There are no problems to report. 10/22/2013 06:45 dchase User: dchase. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Alarms will be investigated during a site GMC today.. Error: 03: Test Tag Failed. 05: Test Tag Failed. 10/20/2013 07:01 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be investigated on the next site visit.. Error: 05: Test Tag Failed. 10/19/2013 06:49 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: PSMFC will investigate on the next site visit. The antenna is reading PIT tagged fish at 100% efficiency. . Error: 05: Test Tag Failed. 10/18/2013 12:41 NTancret Updated M4 lookup file to include new tags for AC-15. 10/18/2013 06:33 dchase User: dchase. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: One time test tag failure, this will be investigated during the next site GMC.. Error: 05: Test Tag Failed. 10/16/2013 11:15 NTancret Updated M4 lookup file to include additional tag codes for AC-16. 10/14/2013 07:11 dchase User: dchase. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Alarms will be investigated during the next GMC.. Error: 02: Virtual Tag Test Failed. 10/11/2013 06:37 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 01: Virtual Tag Test Failed. 10/10/2013 11:04 NTancret Updated lookup file to include new tag codes for AC 15. 10/10/2013 06:27 dchase User: dchase. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Alarms were addressed during a site GMC.. Error: 01: Virtual Tag Test Failed. 10/08/2013 09:32 rclark Performed site GMC on 10/8/2013. All transceivers were checked for tune and adjusted as needed. M4 PC1 and PC2 are within 3 seconds of atomic time. There are no problems to report. 10/08/2013 06:35 dchase User: dchase. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Alarms will be investigated during the next site GMC.. Error: 06: Test Tag Failed. 07: Test Tag Failed. 10/07/2013 06:49 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 07: Test Tag Failed. 06: Test Tag Failed. 10/06/2013 06:38 Alan User: Alan. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Will investigate during next site visit.. Error: 06: Test Tag Failed. 10/05/2013 10:04 Alan User: Alan. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: 07 could need a tune, one-time on 06, CEA shows both of these antennas at high efficiency. Error: 07: Test Tag Failed. 06: Test Tag Failed. 10/04/2013 07:43 Alan User: Alan. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Hoping the lights go green this time.... Error: 01: Noise Level High. 02: Noise Level High. 07: Test Tag Failed. 10/02/2013 08:44 Alan User: Alan. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: low quantity alarms. Error: 01: Virtual Tag Test Failed. 02: Virtual Tag Test Failed. 07: Test Tag Failed. 01: Noise Level High. 02: Noise Level High. 09/28/2013 09:46 scottl User: scottl. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 01: Virtual Tag Test Failed. 02: Virtual Tag Test Failed. 09/27/2013 12:43 NTancret Updated M4 lookup file with new codes for AC-15. 09/25/2013 08:42 Alan User: Alan. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: One time errors, these will be investigated during the next site visit.. Error: 02: Virtual Tag Test Failed. 02: Noise Level High. 09/24/2013 14:32 NTancret Updated M4 site configs and lookup files to include two new action codes : 15 (D. Milk's returning Lyons Ferry fall Chinook) and 16 (A. Byrne's returning Dworshak steelhead). 09/23/2013 09:02 DGE_Robo SByC_Enable (SBC) changed from 'OFF' to 'ON' at 2013/09/23 07:54:09 09/23/2013 09:02 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/09/23 07:54:06 09/23/2013 09:02 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/09/23 07:54:06 09/23/2013 08:28 Don_Warf Folks, The water temperatures have cooled enough for us to resume trapping. We will be firing up the adult trap on the morning of Monday, September 23. Darren 09/23/2013 07:11 Alan User: Alan. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No apparent reason for this one time alarm.. Error: 02: Virtual Tag Test Failed. 09/20/2013 06:06 rclark User: rclark. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Errors caused by short noise event at around 18:00 hours PST.. Error: 01: Noise Level High. 02: Noise Level High. 04: Analog comm. 05: Analog comm. 08: Analog comm. 09/19/2013 21:02 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/09/19 18:13:58 09/19/2013 21:02 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/09/19 18:11:57 09/19/2013 10:47 rclark User: rclark. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: GRA: Excessive noise level. GRA: Noise Level High. 09/18/2013 06:34 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 01: Noise Level High. 02: Noise Level High. 09/16/2013 06:10 rclark User: rclark. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: GRA: Excessive noise level. GRA: Noise Level High. GRA: Analog comm. GRA: Exc current low. 09/16/2013 06:10 rclark User: rclark. Site: GRA. Antenna Group Name: WEIR 733. Antenna: 02. Comments: Noted. Error: 02: Noise Level High 09/16/2013 06:10 rclark User: rclark. Site: GRA. Antenna Group Name: WEIR 733. Antenna: 01. Comments: Noted. Error: 01: Noise Level High 09/15/2013 07:43 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: 01: Noise Level High. 02: Noise Level High. 04: Analog comm. 08: Analog comm. 03: Exc current low. 09/15/2013 07:34 Troy@bay 03:LowExcCurrent: Noted 09/14/2013 09:02 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/09/14 08:33:26 09/14/2013 09:02 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/09/14 08:31:26 09/13/2013 06:54 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: GRA: Excessive noise level. GRA: Noise Level High. 09/13/2013 06:38 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: 01: Noise Level High. 02: Noise Level High. 09/12/2013 07:21 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted, clearing TASS.. Error: GRA: Excessive noise level. GRA: Noise Level High. GRA: Memory Low. GRA: Test Tag Failed. GRA: Memory full. 09/12/2013 07:20 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 01: Noise Level High. 02: Noise Level High. 02: Memory Low. 07: Test Tag Failed. 09/12/2013 07:18 Troy@bay 03:ReaderReset,04:InputSyncDetect,04:ReaderReset,05:ReaderReset,06:InputSy ncDetect,06:ReaderReset,07:ReaderReset,08:ReaderReset,08:RocketPortNoEOT,1 2:ReaderReset,14:InputSyncDetect,14:ReaderReset,16:InputSyncDetect,16:Read erReset,18:InputSyncDetect,18:ReaderReset,22:InputSyncDetect,22:ReaderRese t,24:InputSyncDetect,24:ReaderReset,26:InputSyncDetect,26:ReaderReset,28:R eaderReset: These alarms are the result of a power outage. AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/09/11 08:54:50 AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/09/11 08:56:55 09/11/2013 09:03 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/09/11 08:56:55 09/11/2013 09:03 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/09/11 08:54:50 09/10/2013 06:52 darren@b 07:TestTagFailure: One time alarm will be investigated during the next site visit. 09/09/2013 09:28 rclark Performed site GMC on 9/9/2013. All transceivers were checked for tune and adjusted as needed. Multimon PC1 is 30 seconds and PC2 is 1 second behind atomic time. Files on PC2 were archived. There are no problems to report. 09/08/2013 07:45 dchase User: dchase. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Clearing TASS.. Error: 01: Noise Level High. 02: Noise Level High. 09/07/2013 08:20 dchase User: dchase. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Clearing TASS. Error: 01: Noise Level High. 02: Noise Level High. 09/05/2013 06:54 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Clearing all System and PLC errors.. Error: GRA: Excessive noise level. GRA: Tuning Out Of Range. GRA: Virtual Tag Test Failed. GRA: Noise Level High. GRA: Test Tag Failed. GRA: Memory full. GRA: Exc current low. 09/04/2013 06:13 darren@b 03:ReaderReset,04:InputSyncDetect,04:ReaderReset,05:ReaderReset,06:InputSy ncDetect,06:ReaderReset,07:ReaderReset,08:ReaderReset,08:RocketPortNoEOT,1 2:ReaderReset,14:InputSyncDetect,14:ReaderReset,16:InputSyncDetect,16:Read erReset,18:InputSyncDetect,18:ReaderReset,22:InputSyncDetect,22:ReaderRese t,24:InputSyncDetect,24:ReaderReset,26:InputSyncDetect,26:ReaderReset,28:R eaderReset: These alarms appear to be the result of a power outage. PSMFC will try to confirm with site personnel and update when information is available. 09/03/2013 12:01 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/09/03 09:11:31 09/03/2013 12:01 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/09/03 09:09:31 09/03/2013 09:02 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/09/03 08:26:13 09/03/2013 09:02 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/09/03 08:24:03 09/03/2013 09:02 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/09/03 08:16:19 09/03/2013 09:02 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/09/03 08:14:05 09/03/2013 06:50 dchase User: dchase. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Clearing TASS.. Error: 06: Test Tag Failed. 09/03/2013 06:24 darren@b 06:TestTagFailure: Alarm will be investigated during the next site visit. 09/01/2013 07:05 rclark User: rclark. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 01: Noise Level High. 02: Noise Level High. 08/31/2013 06:46 rclark User: rclark. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 01: Noise Level High. 02: Noise Level High. 08/30/2013 06:11 scottl@b 07:LowExcCurrent: Noted 08/29/2013 06:10 rclark User: rclark. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Known issue at this site.. Error: 01: Noise Level High. 02: Noise Level High. 08/28/2013 06:11 rclark User: rclark. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 01: Noise Level High. 02: Noise Level High. 08/27/2013 06:07 rclark User: rclark. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: The error on 07 was caused during a site GMC. Unknown cause for the high noise alarms on 01 and 02. Will continue to monitor.. Error: 01: Noise Level High. 02: Noise Level High. 07: Exc current low. 08/26/2013 09:54 rclark Performed site GMC on 8/26/2013. All transceivers were checked for tune and adjusted as needed. Multimon PC1 is 27 seconds and PC2 was 77 seconds behind atomic time. Adjusted the PC2 clock to within 1 second of PC1. Files on PC2 were archived. There are no problems to report. 08/26/2013 06:11 rclark User: rclark. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be checked during today's site visit. Error: 01: Virtual Tag Test Failed. 08/24/2013 09:16 Alan User: Alan. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be investigated during the next site visit.. Error: 01: Noise Level High. 02: Noise Level High. 08/22/2013 07:48 alan@bay 07:TestTagFailure: Cleared on new TASS 08/22/2013 07:38 Alan User: Alan. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be investigated during the next site visit. These transceivers are reading PIT tags and timer tags well, a fish was in the field during the TT alarm for 07.. Error: 01: Noise Level High. 02: Noise Level High. 07: Test Tag Failed. 08/21/2013 06:59 Alan User: Alan. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be investigated during the next site visit.. Error: 01: Noise Level High. 02: Noise Level High. 08/20/2013 06:48 Alan User: Alan. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be investigated during the next site visit.. Error: 01: Noise Level High. 02: Noise Level High. 08/19/2013 11:01 NTancret Updated M4 computers with new site configuration and lookup file. These new files change the SbyC operation from 5 days a week to 24/7, and add tag codes for AC 14 (Marsh's adult fall Chinook). 08/19/2013 09:12 Alan User: Alan. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be addressed during the next site visit. . Error: 01: Noise Level High. 02: Noise Level High. 08/12/2013 09:02 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/08/12 05:01:33 08/12/2013 09:02 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/08/12 04:59:33 08/12/2013 07:47 dlwarf User: dlwarf. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Clearing new TASS. Will monitor this alarm.. Error: 01: Noise Level High. 02: Noise Level High. 08/11/2013 07:32 dchase User: dchase. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Clearing TASS.. Error: 01: Noise Level High. 02: Noise Level High. 08/07/2013 09:18 Alan User: Alan. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No apparent reason for this alarm. Error: 07: Exc current low. 08/05/2013 15:12 rclark@b 07:LowExcCurrent,07:ReaderReset,08:InputSyncDetect,08:InputSyncLost: Errors caused by PSMFC personnel during site visit. 08/05/2013 09:39 rclark Performed site GMC on 8/5/2013. All transceivers were checked for tune and adjusted as needed. Multimon PC1 is 23 seconds and PC2 was 54 seconds behind atomic time. Adjusted PC2 to within 1 second of PC1. Files on PC2 were archived. There are no problems to report. 08/03/2013 07:54 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 02: Noise Level High. 08/02/2013 07:43 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 01: Noise Level High. 02: Noise Level High. 07/31/2013 10:51 NTancret Updated M4 machines with new site configs and lookup file, which include actions and tag codes for AC-13, adult steelhead returning to Clearwater River. 07/31/2013 06:20 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 02: Noise Level High. 01: Noise Level High. 07/30/2013 07:24 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: 07: Exc current low. 07/30/2013 07:21 thumphre User: thumphrey. Site: GRA. Antenna Group Name: . Antenna: No errors were removed. Comments: This will be investigated on the next site visit.. Error: 07/30/2013 07:20 thumphre User: thumphrey. Site: GRA. Antenna Group Name: . Antenna: No errors were removed. Comments: This will be investigated on the next site visit.. Error: 07/26/2013 15:01 DGE_Robo A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/07/26 13:52:36 07/26/2013 15:01 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/07/26 13:52:36 07/26/2013 15:01 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/07/26 13:52:36 07/26/2013 15:01 DGE_Robo B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/07/26 13:52:35 07/26/2013 06:02 DGE_Robo A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/07/26 05:41:47 07/26/2013 06:02 DGE_Robo B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/07/26 05:41:46 07/25/2013 15:02 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/07/25 13:40:50 07/25/2013 15:02 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/07/25 13:40:49 07/25/2013 06:43 darren@b 07:LowExcCurrent: No direct cause for this alarm. 07/24/2013 07:53 darren@b 07:LowExcCurrent,14:InputSyncDetect,14:InputSyncLost,14:LowExcCurrent,16:I nputSyncDetect,16:InputSyncLost,28:TestTagFailure: Clearing TASS. These alarms are older and may have been generated by PSMFC during a site GMC. 07/23/2013 06:59 dchase User: dchase. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: PSMFC will investigate this alarm on the next site GMC.. Error: 14: Exc current low. 07/22/2013 09:27 rclark Performed site GMC on 7/22/2013. All transceivers were checked for tune and adjusted as needed. Corrosion on the timer tag connector for monitor 28 was cleaned. Multimon PC1 is 20 seconds and PC2 was 47 seconds behind atomic time. Adjusted PC2 to within 1 second of PC1. Files on PC1 were archived. There are no problems to report. 07/22/2013 06:15 scottl User: scottl. Site: GRA. Antenna Group Name: ISO EAST. Antenna: 28. Comments: Alarms will be addressed on the next site visit scheduled for this week. Error: 28: Test Tag Failed 07/17/2013 06:16 scottl User: scottl. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Will remote into site and try to re-tune transceivers or see why the noise levels are still high.. Error: 01: Noise Level High. 02: Noise Level High. 01: Virtual Tag Test Failed. 07/16/2013 06:14 scottl User: scottl. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Will monitor noise levels. Error: 01: Noise Level High. 02: Noise Level High. 07/15/2013 09:02 DGE_Robo TrapGate (Trap) changed from 'OPEN' to 'CLOSED' at 2013/07/15 06:58:02 07/15/2013 07:24 Don_Warf I just want to give you a heads up that we are shutting the turn pool gate this morning. We are experience hot water problems and have suspended trapping until the water temperatures cool. I don't know when we will get back to trapping, it could be some time before we do. I'll let you know when we do. Darren 07/15/2013 06:17 scottl User: scottl. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: 07: Test Tag Failed. 07/13/2013 21:02 DGE_Robo TrapGate (Trap) changed from 'CLOSED' to 'OPEN' at 2013/07/13 18:54:05 07/13/2013 07:14 Alan User: Alan. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This is under investigation.. Error: 01: Noise Level High. 02: Noise Level High. 07/11/2013 06:06 rclark User: rclark. Site: GRA. Antenna Group Name: ISO WEST. Antenna: 14. Comments: Caused by PSMFC personnel during site visit.. Error: 14: Test Tag Failed 07/11/2013 06:06 rclark User: rclark. Site: GRA. Antenna Group Name: ISO WEST. Antenna: 12. Comments: Caused by PSMFC personnel during site visit.. Error: 12: Test Tag Failed 07/11/2013 06:04 rclark@b 12:TestTagFailure,14:TestTagFailure: Caused by PSMFC personnel during site visit. 07/10/2013 14:30 sdudek@p User: sdudek@psmfc.org. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: test Sebastian. Error: 01: Noise Level High. 02: Noise Level High. 07/10/2013 12:02 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/07/10 06:51:31 07/10/2013 12:02 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/07/10 06:51:31 07/10/2013 10:28 alan@bay 03:ReaderReset,04:ReaderReset,05:ReaderReset,06:InputSyncDetect,06:RocketP ortNoEOT,07:ReaderReset,08:ReaderReset,08:RocketPortNoEOT,12:ReaderReset,1 4:InputSyncDetect,14:ReaderReset,16:InputSyncDetect,16:ReaderReset,18:Inpu tSyncDetect,18:ReaderReset,22:InputSyncDetect,22:ReaderReset,24:InputSyncD etect,24:ReaderReset,26:InputSyncDetect,26:ReaderReset,28:ReaderReset: Cleared on new TASS. 07/10/2013 09:36 rclark Performed site GMC on 7/10/2013. All transceivers were checked for tune and adjusted as needed. Multimon PC1 is 20 seconds and PC2 was 71 seconds behind atomic time. Adjusted PC2 to within 1 second of PC1. Files on PC2 were archived. There are no problems to report. 07/10/2013 09:06 Alan User: Alan. Site: GRA. Antenna Group Name: WEIR 733. Antenna: 02. Comments: The cause of these alarms is under investigation.. Error: 02: Noise Level High 07/10/2013 09:06 Alan User: Alan. Site: GRA. Antenna Group Name: WEIR 733. Antenna: 01. Comments: The cause of these alarms is under investigation.. Error: 01: Noise Level High 07/09/2013 06:01 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/07/09 05:08:25 07/09/2013 06:01 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/07/09 05:06:25 07/07/2013 18:03 DGE_Robo TrapGate (Trap) changed from 'OPEN' to 'CLOSED' at 2013/07/07 14:44:29 07/07/2013 18:03 DGE_Robo TrapGate (Trap) changed from 'CLOSED' to 'OPEN' at 2013/07/07 14:44:28 07/07/2013 06:22 rclark User: rclark. Site: GRA. Antenna Group Name: WEIR 733. Antenna: 02. Comments: This will be checked during the next site visit.. Error: 02: Virtual Tag Test Failed 07/06/2013 00:02 DGE_Robo TrapGate (Trap) changed from 'OPEN' to 'CLOSED' at 2013/07/05 21:58:16 07/04/2013 06:23 rclark User: rclark. Site: GRA. Antenna Group Name: WEIR 733. Antenna: 02. Comments: This will be checked during the next site visit.. Error: 02: Virtual Tag Test Failed 07/04/2013 06:02 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/07/04 05:18:41 07/04/2013 06:02 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/07/04 05:18:41 07/03/2013 09:32 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/07/03 07:47:18 07/03/2013 09:32 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/07/03 07:47:18 06/29/2013 06:04 Alan User: Alan. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This is under investigation. Error: 01: Noise Level High. 02: Noise Level High. 06/27/2013 07:20 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 01: Noise Level High. 02: Noise Level High. 01: Virtual Tag Test Failed. 06/26/2013 12:55 NTancret Updated M4 site configurations and lookup files to include new action code 12 - IDFG repeat spawning Snake River steelhead - to start collections on Monday, July 1. 06/25/2013 15:03 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/25 09:35:34 06/25/2013 15:03 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/25 09:35:33 06/25/2013 09:12 Alan User: Alan. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be investigated during the next site visit. These transceivers are reading PIT tags and TT with very high efficiency.. Error: 01: Noise Level High. 02: Noise Level High. 02: Virtual Tag Test Failed. 06/25/2013 09:02 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/25 08:18:43 06/25/2013 09:02 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/25 08:18:42 06/24/2013 10:04 rclark Performed site GMC on 6/24/2013. All transceivers were checked for tune and adjusted as needed. The ladder transceivers have a rolling noise that occurs every 10 to 20 seconds. I talked to the guard and he said that there were people from UC Davis there on Thurday around when the increased noise started. I also talked to someone from U of I and he stated that they haven't made any changes to their equipment. Multimon PC1 is 15 seconds and PC2 is 32 seconds behind atomic time. There are no other problems to report. 06/24/2013 07:08 Alan User: Alan. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be investigated during the next site visit.. Error: 01: Noise Level High. 02: Noise Level High. 06/23/2013 08:08 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Known issue, clearing TASS.. Error: 01: Noise Level High. 02: Noise Level High. 01: Virtual Tag Test Failed. 06/22/2013 06:26 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Known noise events, clearing TASS.. Error: 01: Noise Level High. 02: Noise Level High. 01: Virtual Tag Test Failed. 06/21/2013 19:46 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 01: Noise Level High. 02: Noise Level High. 02: Virtual Tag Test Failed. 01: Virtual Tag Test Failed. 06/19/2013 06:40 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: 02: Noise Level High. 01: Noise Level High. 06/17/2013 09:45 rclark Performed site GMC on 6/17/2013. All transceivers were checked for tune and adjusted as needed. Multimin PC1 is 15 seconds and PC2 was 47 seconds behind atomic time. Adjusted PC2 to within 1 second of PC1. Files on PC2 were archived. There are no problems to report. 06/17/2013 06:53 scottl User: scottl. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: 06/17/2013 06:52 scottl User: scottl. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 01: Noise Level High. 06/16/2013 08:09 dchase User: dchase. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Clearing TASS. Error: 01: Noise Level High. 02: Noise Level High. 06/14/2013 06:57 dchase User: dchase. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Alarm will be investigated during the next site GMC.. Error: 01: Noise Level High. 06/13/2013 08:04 dlwarf User: dlwarf. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Will be investigated on Monday.. Error: 01: Noise Level High. 02: Noise Level High. 06/10/2013 09:38 rclark Performed site GMC on 6/10/2013. All transceivers were checked for tune and adjusted as needed. Multimon PC1 is 14 seconds and PC2 is 30 seconds behind atomic time. Files on PC2 were archived. There are no problems to report. 06/08/2013 07:33 rclark User: rclark. Site: GRA. Antenna Group Name: WEIR 733. Antenna: 01. Comments: Noted.. Error: 01: Noise Level High. 06/05/2013 06:05 scottl User: scottl. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted will monitor. Error: 01: Noise Level High. 02: Noise Level High. 06/04/2013 06:07 rclark User: rclark. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Known issue. PSMFC is working to resolve the problem.. Error: 01: Noise Level High. 02: Noise Level High. 06/03/2013 09:32 rclark Performed site GMC on 6/3/2013. All transceivers were checked for tune and adjusted as needed. Multimon PC is 13 seconds and PC2 was 60 seconds behind atomic time. Adjusted the PC2 clock to within 1 second of PC1. Archived files on PC2. There are no problems to report. 06/03/2013 06:21 scottl User: scottl. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted . Error: 01: Noise Level High. 02: Noise Level High. 06/01/2013 07:11 Alan User: Alan. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This is under investigation. Error: 01: Noise Level High. 02: Noise Level High. 01: Virtual Tag Test Failed. 05/31/2013 15:02 DGE_Robo SByC_Enable (SBC) changed from 'ON' to 'OFF' at 2013/05/31 14:03:36 05/30/2013 15:05 NTancret Updated M4 configuration to set an end date for collection of AC-11. SbyC for this AC will end tomorrow at 3:00pm PDT. 05/30/2013 07:20 alan@bay 04:InputSyncDetect,04:ReaderReset: Cleared on new TASS 05/30/2013 07:09 Alan User: Alan. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noise is being investigated. Error: 01: Noise Level High. 02: Noise Level High. 02: Virtual Tag Test Failed. 05/29/2013 06:57 Alan User: Alan. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This noise is being investigated. Error: 01: Noise Level High. 02: Noise Level High. 02: Virtual Tag Test Failed. 05/28/2013 13:11 thumphre A site GMC was conducted along with another noise search. It was noticed over the weekend that we are still getting several high noise alarms on 01 and 02. I turned off all the 1/2 duplex and camera equipment, did a radio test of the gaurd shacks radios, shut off NOAA's equipment for 15 mins but could not pin down the source of the noise. It is very periodic. PSMFC Kennewick will work with the Portland group to try and see if we can establish a pattern. It may be related to fish traffic. What can be proven is the 1/2 duplex does raise the noise floor a bit but doesn't cause the spikes. Some spikes were seen as high as 59 on 01. Curiously when I run a noise report status on 01 and 02 the peak is never reported as high as I have witnessed while watching the signal level on the 2020. 05/28/2013 11:26 Alan User: Alan. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This is under investigation. Error: 01: Noise Level High. 02: Noise Level High. 01: Virtual Tag Test Failed. 05/27/2013 08:27 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: PSMFC is investigating.. Error: 01: Noise Level High. 02: Noise Level High. 05/26/2013 08:13 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: PSMFC is in the process of investigating this.. Error: 02: Noise Level High. 01: Noise Level High. 05/26/2013 08:02 thumphre manuallly pushed the delinqent file 05/25/2013 07:40 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: 01: Noise Level High. 02: Noise Level High. 02: Virtual Tag Test Failed. 05/25/2013 07:34 thumphre User: thumphrey. Site: GRA. Antenna Group Name: . Antenna: No errors were removed. Comments: PSMFC is in the process of determining the cause of the noise.. Error: 05/24/2013 07:00 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Known issue, PSMFC is working with UofI to resolve this issue.. Error: 01: Noise Level High. 02: Noise Level High. 05/23/2013 06:55 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: U of I will be on site to change the operation of the Lamprey equipment that is causing the high noise events.. Error: 01: Noise Level High. 02: Noise Level High. 02: Virtual Tag Test Failed. 05/22/2013 07:05 alan@bay 03:TestTagFailure: Cleared on new TASS 05/22/2013 06:50 Alan User: Alan. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This is being investigated today. Error: 01: Noise Level High. 02: Noise Level High. 03: Test Tag Failed. 02: Virtual Tag Test Failed. 01: Virtual Tag Test Failed. 05/21/2013 07:17 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: PSMFC is in the process of tracking down the noise at this site.. Error: 01: Noise Level High. 02: Noise Level High. 02: Virtual Tag Test Failed. 01: Virtual Tag Test Failed. 05/20/2013 11:26 Roger Performed site GMC on 5/20/2013. All transceivers were checked for tune and adjusted as needed. There is a rolling noise going through the ladder transceivers. The only new thing that I noticed in the area was underwater camera just up and around the corner from the transceivers. PC1 is 10 seconds and PC2 is 21 seconds behind atomic time. Files on PC2 were archived. There are no other problems to report. 05/20/2013 09:59 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 01: Noise Level High. 02: Noise Level High. 05/20/2013 09:39 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: These alarms will be addressed today during a GMC.. Error: 01: Noise Level High. 02: Noise Level High. 05/20/2013 08:38 dlwarf User: dlwarf. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Site will be tuned later today.. Error: 01: Noise Level High. 02: Noise Level High. 02: Virtual Tag Test Failed. 05/20/2013 06:24 dchase User: dchase. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Alarms will be investigated during the next site visit.. Error: 01: Noise Level High. 02: Noise Level High. 01: Virtual Tag Test Failed. 05/19/2013 06:49 rclark User: rclark. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: 01: Noise Level High. 02: Noise Level High. 05/19/2013 06:47 rclark User: rclark. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: These alarms will be addressed during the next site visit.. Error: 01: Noise Level High. 02: Noise Level High. 01: Virtual Tag Test Failed. 02: Virtual Tag Test Failed. 05/18/2013 06:50 rclark@b 07:TestTagFailure: Cleared on new TASS. 05/18/2013 06:36 rclark User: rclark. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: These alarms will be investigated during the next site visit.. Error: 01: Noise Level High. 02: Noise Level High. 01: Virtual Tag Test Failed. 02: Virtual Tag Test Failed. 07: Test Tag Failed. 05/17/2013 13:50 sdudek@p User: sdudek@psmfc.org. Site: GRA. Antenna Group Name: . Antenna: . Comments: test. Error: : Tuning Capacitance High 05/17/2013 13:50 sdudek@p User: sdudek@psmfc.org. Site: GRA. Antenna Group Name: . Antenna: . Comments: test. Error: : Noise Level High 05/17/2013 06:50 dchase User: dchase. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: These alarms will be addressed during the next site visit.. Error: 01: Noise Level High. 02: Noise Level High. 01: Tuning Capacitance High. 01: Tuning Out Of Range. 02: Virtual Tag Test Failed. 05/16/2013 06:17 rclark User: rclark. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Transceiver 01 will be retuned during the next site visit. The high noise level will be investigated. The transceivers are still reading with high efficiency.. Error: 01: Noise Level High. 02: Noise Level High. 01: Tuning Capacitance High. 01: Tuning Out Of Range. 01: Virtual Tag Test Failed. 05/15/2013 06:25 rclark User: rclark. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: The noise alarms will be investigated during the next site visit. Transceiver 01 is close to the edge of it's tuning range. A cap jumper position may need to be changed.. Error: 01: Tuning Capacitance High. 01: Tuning Out Of Range. 01: Noise Level High. 02: Noise Level High. 01: Virtual Tag Test Failed. 05/14/2013 06:06 rclark User: rclark. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: unknown cause for the high noise alarms. Will continue to monitor.. Error: 01: Noise Level High. 02: Noise Level High. 05/13/2013 09:48 Roger Performed site GMC on 5/13/2013. All transceivers were checked for tune and adjusted as needed. Multimon PC1 is 9 seconds and PC2 was 26 seconds behind atomic time. Adjusted PC2 to within 1 second of PC1. Files on PC2 were archived. There are no problems to report. 05/09/2013 06:19 scottl User: scottl. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: 01: Noise Level High. 02: Noise Level High. 05/06/2013 10:12 Roger Performed site GMC on 5/6/2013. All transceivers were checked for tune and adjusted as needed. Multimon PC1 is 9 seconds and PC2 was 51 seconds behind atomic time. Adjusted PC2 to within 1 second of PC1. Archived files on PC2. There are no problems to report. 04/30/2013 10:41 Darren A site GMC was performed today 4-30-13. All transceivers were checked and adjusted for tuning and noise. The PC clocks are within 20 seconds of each other and atomic time and the Multimon and M4 platforms. No problems were discovered during this visit. 04/30/2013 06:23 dchase User: dchase. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Alarms will be investigated during the next site GMC.. Error: 08: Test Tag Failed. 02: Noise Level High. 04/27/2013 07:27 troy@bay 08:TestTagFailure: Noted 04/26/2013 08:12 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Cleared using old TASS. Error: 04/26/2013 08:12 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Cleared using old TASS. Error: 01: Noise Level High. 02: Noise Level High. 04/25/2013 07:57 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 01: Noise Level High. 02: Noise Level High. 04/22/2013 09:42 Roger Performed site GMC on 4/22/2013. All transceivers were checked for tune and adjusted as needed. PC1 is 7 seconds and PC2 was 37 seconds behind atomic time. Adjusted PC2 to within 1 second of PC1. Archived files on PC2. There are no problems to report. 04/22/2013 06:37 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: A GMC is scheduled for today.. Error: 01: Noise Level High. 02: Noise Level High. 03: Test Tag Failed. 04/22/2013 06:28 Troy@bay 03:TestTagFailure: This will be investigated today during a GMC. 04/21/2013 07:45 alan@bay 03:TestTagFailure: This transceiver might have slipped a bit in tune but is still reading PIT tags well. PTAGIS Field Operations will investigate during the next site visit. 04/17/2013 18:03 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/04/17 14:52:52 04/17/2013 18:03 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/04/17 14:50:52 04/17/2013 18:03 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/04/17 13:59:44 04/17/2013 18:03 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/04/17 13:57:44 04/15/2013 10:17 Roger Performed site GMC on 4/15/2013. All transceivers were checked for tune and adjusted as needed. PC1 is 6 seconds and PC2 is 21 seconds behing atomic time. Files on PC2 were archived. The padlock to the gate for the ladder transceivers was hanging on the fence. The door to the pit tag room was open when I arrived. I didn't find any evidence of tampering with the equipment in the pit tag room. There are no other problems to report. 04/15/2013 08:53 Alan No PIT tag detections occurred during the M4 upgrade on 4/12/2013. 04/12/2013 09:49 scottl The M4 platform was upgraded to M4 Ver. 1.5.4 without issues. Verified that the NTP time sync schedule was active and using Pool.NTP.org. Transceiver 08 is being looked into. 04/12/2013 07:46 dlwarf User: dlwarf. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Short duration of noise. . Error: 01: Noise Level High. 02: Noise Level High. 04/11/2013 12:44 Alan Manually pushed GRA13101.103 & 104 to PTAGIS. The temp folder was emptied, but there were no zip files. 04/08/2013 09:56 Roger Performed site GMC on 4/8/2013. All transceivers were checked for tune and adjusted as needed. PC1 is 4 seconds behind and PC2 was 35 seconds behind atomic time. Adjusted PC2 within 1 second of PC1. There are no problems to report. 04/08/2013 07:25 Alan The former DST rules caused the Multimon file creation intervals to be off by one hour. At 0821 PDT 4-8-2013, data collection was exited and restarted on both PCs to re-establish proper file creation intervals. Files GRA13098.103 & .203 were the last files created prior to this procedure and were submitted manually. Outstanding files on PC2 were archived. 04/04/2013 16:12 NTancret Updated M4 machines to use lookup file GRA13094.DB, which includes one extra fish for M. Biggs target group. 04/02/2013 09:02 DGE_Robo SByC_Enable (SBC) changed from 'OFF' to 'ON' at 2013/04/02 07:37:41 04/02/2013 06:15 rclark User: rclark. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Unknown cause for the high noise alarms - will continue to monitor. Error: 01: Noise Level High. 02: Noise Level High. 03/27/2013 06:52 scottl User: scottl. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Clezring TASS, Will monitor 01 and 02 for reoccurring noise.. Error: 01: Noise Level High. 02: Noise Level High. 03: Memory low. 08: Analog comm. 08: Bad Exc. Freq.. 08: Bad Osc. Freq.. 08: Exc current low. 03/26/2013 14:57 rclark@b 08:BadExcFreq,08:BadOscFreq,08:LowExcCurrent: Unknown cause for this one time alarm. The time coincided with a site GMC. Will continue to monitor. 03/26/2013 05:56 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/03/25 15:44:34 03/26/2013 05:56 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/03/25 15:42:34 03/25/2013 10:31 Roger Performed site GMC on 3/25/2013. All transceivers were checked for tune and adjusted as needed. A Multimon annual reset was performed on PC1 and PC2. GRA13084.206 was submitted as a gap file. PC1 and PC2 clocks are within 1 second of atomic time. Total Commander was loaded onto the M4 PC's. There are no problems to report. 03/22/2013 18:00 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/03/22 15:56:04 03/22/2013 18:00 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/03/22 15:54:04 03/22/2013 16:28 Troy Responded to a call that PLC was locked up. Site personnel tried to power cycle the PLC on my recommendation. It turns out the PLC was faulted, looks like by a major math error. Took some screen shots of the errors. Investigated furthe to try and find out what transpired so we can avoid this problem in the future. Double checked that constraints were in place to keep the operator from entering a sample rate value that would cause a math error. Checked the M4 file to see what the sample rate had been set to and found several instance of 0 openings per hour. This most likely caused the math error. I investigate how this was possible and found that the constraint was not in place for the 'enter both openings per hour'. I corrected this in the HMI program and downloaded it to the HMI. I tried to contact site personnel to let them know things were fixed but could not reach them so I will email them. I verified that the PLC was set to change it's sample rate on Sunday at 1400 to 21% with 4 openings per hour. 03/21/2013 10:10 Scott_Li Re-directed the Network Time Protocol to synchronize to Pool.NTP.org Set task scheduler to trigger the time synchronization process every day and re-occur every hour indefinitely. Also turned on the history logging within task scheduler. This should keep the two M4 PC's in perfect time with each other and the atomic clock. 03/20/2013 06:01 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/03/20 04:15:09 03/20/2013 06:01 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/03/20 04:13:09 03/19/2013 12:01 DGE_Robo TrapGate (Trap) changed from 'CLOSED' to 'OPEN' at 2013/03/19 11:40:37 03/19/2013 11:59 Alan A GMC was performed 3-19-2013. All transceivers were checked and tuned as necessary. PC1 is within one second of atomic time, PC2 (-17 sec) was adjusted to within one second of PC1. Outstanding files on PC2 were archived. Site personnel manipulated the trap gate switch/whip and the correct operation was achieved. It was decided that any adjustment will be made during the next ladder outage. The gate did not change states today, the gate was already open. No other problems found. 03/15/2013 12:01 NTancret Updated M4 SbyC configurations to enable schedule of Sunday 1500 - Friday 1500. 03/14/2013 07:08 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 04: Excessive noise level. 03/13/2013 06:51 dchase User: dchase. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Alarms wil be addressed during the next site visit.. Error: 07: Excessive noise level. 03: Excessive noise level. 04: Excessive noise level. 05: Excessive noise level. 06: Excessive noise level. 08: Excessive noise level. 01: Noise Level High. 02: Noise Level High. 03/12/2013 16:20 NTancret Updated M4 site configurations to enable SbyC for AC-11 (M. Biggs Lemhi Chinook). Collection will run from 1500 Sundays - 1500 Fridays. 03/12/2013 08:36 Don The site watered up for the season on Tuesday, February 26, 2013. Time unknown. 03/12/2013 06:53 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: These alarms appear to have occurred at the same time (They don't show up on the old TASS???). Error: 03: Excessive noise level. 04: Excessive noise level. 05: Excessive noise level. 06: Excessive noise level. 07: Excessive noise level. 08: Excessive noise level. 01: Noise Level High. 02: Noise Level High. 03/11/2013 09:10 thumphre User: thumphrey. Site: GRA. Antenna Group Name: . Antenna: No errors were removed. Comments: No comments. Error: 03/11/2013 07:39 thumphre User: thumphrey. Site: GRA. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Clearing old alarms, site is now watered up.. Error: 07: Excessive noise level. 03: Excessive noise level. 04: Excessive noise level. 05: Excessive noise level. 06: Excessive noise level. 08: Excessive noise level. 01: Noise Level High. 02: Noise Level High. 03/11/2013 07:38 thumphre User: thumphrey. Site: GRA. Comments: Trap watered up 3/4/2013 at 11:00. Event date: 3/4/2013 8:35:00 AM. 03/11/2013 07:35 thumphre User: thumphrey. Site: GRA. Comments: Trap watered up 3/4/2013 at 11:00. Event date: 3/4/2013 11:00:00 AM. 03/06/2013 15:07 Scott_Li On all M4 SByC PC's, set the time Sync process to run every 1 hrs rather than the default of 1 time per week. This is an attempt to keep the M4 clustering as synchronized as possible. 03/04/2013 12:01 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/03/04 10:59:08 03/04/2013 12:01 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/03/04 10:59:07 02/27/2013 07:25 scottl@b 03:ReaderReset,04:ReaderReset,04:RocketPortNoEOT,05:ReaderReset,06:InputSy ncDetect,06:ReaderReset,07:LowExcCurrent,07:ReaderReset,08:ReaderReset,08: RocketPortNoEOT,12:ReaderReset,14:InputSyncDetect,14:ReaderReset,16:InputS yncDetect,16:ReaderReset,18:InputSyncDetect,18:ReaderReset,22:InputSyncDet ect,22:ReaderReset,24:InputSyncDetect,24:ReaderReset,26:InputSyncDetect,26 :ReaderReset,28:ReaderReset: Power outage: 2013/02/26 12:10:26 --> set to 'ON' 2013/02/26 11:49:30 --> set to 'OFF' 02/26/2013 15:02 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/02/26 12:10:26 02/26/2013 12:01 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/02/26 11:49:30 02/26/2013 06:01 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/02/26 03:01:17 02/26/2013 03:02 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/02/26 02:59:16 01/31/2013 07:41 Troy@bay 14:InputSyncDetect,14:ReaderReset: Ladder is de-watered, clearing TASS. 01/30/2013 12:02 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/01/30 09:54:26 01/30/2013 12:02 DGE_Robo B_Sample_Bypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/01/30 09:53:22 01/24/2013 18:01 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/01/24 15:26:00 01/24/2013 18:01 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/01/24 15:24:00 01/17/2013 18:01 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/01/17 15:38:55 01/17/2013 18:01 DGE_Robo A_Sample_Bypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/01/17 15:28:12 01/17/2013 15:01 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/01/17 14:53:59 01/17/2013 15:00 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/01/17 14:51:59 01/11/2013 09:01 DGE_Robo TrapGate (Trap) changed from 'OPEN' to 'CLOSED' at 2013/01/11 07:50:09 01/11/2013 09:01 DGE_Robo TrapGate (Trap) changed from 'CLOSED' to 'OPEN' at 2013/01/11 07:50:03 01/02/2013 16:17 Troy The M4 version was uninstalled, and the appropriate folders deleted. M4 version 1.5.1.0 was then installed. 01/02/2013 00:00 PTOC_Bot Annual log file initiation for GRA #### End of Event Log for GRA ###