EVENT LOG FOR SITE GRJ The first line of each entry contains a date/time stamp & who is reporting. The most recent entry is listed first. Date Time Who ---------- ----- -------- 11/15/2013 07:13 rclark User: rclark. Site: GRJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This was caused by an automatic update of the NIC driver.. Error: GRJ: The cluster connection to machine 192.168.114.17 failed.. 10/31/2013 07:04 Alan Multimon PC2 crashed, a noping was added to big brother- 10/28/2013 09:54 rclark Performed site GMC on 10/28/2013. All transceivers were checked for tune and adjusted as needed. PC2 and PC2 are within 2 seconds of atomic time. There are no problems to report. 10/08/2013 09:51 rclark Performed site GMC on 10/8/2013. All transceivers were checked for tune and adjusted as needed. M4 PC1 and PC2 are within 1 second of atomic time. There are no problems to report. 09/19/2013 21:02 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/09/19 18:13:45 09/19/2013 21:02 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/09/19 18:11:45 09/16/2013 06:11 rclark User: rclark. Site: GRJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: GRJ: Analog comm. GRJ: Exc. Power low. 09/16/2013 06:11 rclark User: rclark. Site: GRJ. Antenna Group Name: DIVERSION RIVER EXIT. Antenna: 91. Comments: Noted. Error: 91: Exc. Power low 09/16/2013 06:11 rclark User: rclark. Site: GRJ. Antenna Group Name: DIVERSION RIVER EXIT. Antenna: 91. Comments: Noted. Error: 91: Analog comm 09/15/2013 12:01 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at 2013/09/15 11:49:10 09/15/2013 12:01 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at 2013/09/15 11:17:28 09/14/2013 09:02 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/09/14 08:33:22 09/14/2013 09:02 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/09/14 08:31:22 09/12/2013 07:22 thumphre User: thumphrey. Site: GRJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Generated by PSMFC personnel during a GMC.. Error: GRJ: Device identifier is mismatched: device sent '03' but M4 expects '71'. This may be due to a transceiver reset or incorrect configuration settings.. 09/12/2013 07:19 Troy@bay 11:ReaderReset,12:InputSyncDetect,12:ReaderReset,21:ReaderReset,22:InputSy ncDetect,22:ReaderReset,23:InputSyncDetect,23:ReaderReset,31:ReaderReset,3 2:InputSyncDetect,32:ReaderReset,51:InputSyncDetect,51:ReaderReset,52:Read erReset,53:ReaderReset,71:ReaderReset,72:InputSyncDetect,72:ReaderReset,81 :ReaderReset,82:InputSyncDetect,82:ReaderReset,91:ReaderReset,92:InputSync Detect,92:ReaderReset,A2:InputSyncDetect,A2:ReaderReset,B2:InputSyncDetect ,B2:ReaderReset,C1:ReaderReset,C2:InputSyncDetect,C2:ReaderReset,D1:InputS yncDetect,D1:ReaderReset,D2:ReaderReset,F1:ReaderReset,F2:InputSyncDetect, F2:ReaderReset: These alarms are the result of a power outage: AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/09/11 08:54:51 AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/09/11 08:56:56 09/11/2013 09:02 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/09/11 08:56:56 09/11/2013 09:02 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/09/11 08:54:51 09/10/2013 09:02 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/09/10 06:05:16 09/09/2013 09:50 rclark Performed site GMC on 9/9/2013. All transceivers were checked for tune and adjusted as needed. Multimon PC1 is 25 seconds behind and PC2 was 16 seconds ahead of atomic time. Adjusted PC2 to within 1 second of PC1. Archived files on PC2. There are no problems to report. 09/05/2013 06:54 thumphre User: thumphrey. Site: GRJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Clearing all System and PLC errors.. Error: GRJ: The following transceiver data could not be processed: Unknown Command! (H for help) . GRJ: Analog comm. GRJ: Exc. Power low. GRJ: 72 transceiver has not responded in 65 minute(s).. GRJ: Overrun. 09/05/2013 06:02 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/09/05 05:54:38 09/05/2013 06:02 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/09/05 05:54:23 09/05/2013 06:02 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/09/05 05:54:22 09/04/2013 06:17 darren@b 11:ReaderReset,12:InputSyncDetect,12:ReaderReset,21:ReaderReset,22:InputSy ncDetect,22:ReaderReset,23:InputSyncDetect,23:ReaderReset,31:ReaderReset,3 2:InputSyncDetect,32:ReaderReset,51:InputSyncDetect,51:ReaderReset,52:Read erReset,53:ReaderReset,71:ReaderReset,72:InputSyncDetect,72:ReaderReset,81 :ReaderReset,82:InputSyncDetect,82:ReaderReset,91:ReaderReset,92:InputSync Detect,92:ReaderReset,A2:InputSyncDetect,A2:ReaderReset,B2:InputSyncDetect ,B2:ReaderReset,C1:ReaderReset,C2:InputSyncDetect,C2:ReaderReset,D1:InputS yncDetect,D1:ReaderReset,D2:ReaderReset,F1:ReaderReset,F2:InputSyncDetect, F2:ReaderReset: Alarms appear to be the result of a site power issue. PSMFC will try to confirm with site personnel and update when available. 09/03/2013 12:19 Alan File GRJ13244.108 was moved from the 'Archive' folder to the 'PC1 Data' folder and submitted during the next auto upload. 09/03/2013 09:01 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/09/03 08:26:27 09/03/2013 09:01 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/09/03 08:24:18 09/03/2013 09:01 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/09/03 08:16:33 09/03/2013 09:01 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/09/03 08:14:19 09/03/2013 06:26 darren@b 22:Overrun,32:InputSyncDetect,32:ReaderReset: Alarms will investigated during the next site visit. 08/29/2013 06:15 rclark User: rclark. Site: GRJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Unknown cause for this one time error. Will continue to monitor.. Error: 22: Overrun. 08/28/2013 06:12 rclark User: rclark. Site: GRJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 91: Analog comm. 91: Exc. Power low. 08/26/2013 10:19 rclark Performed site GMC on 8/26/2013. All transceivers were checked for tune and adjusted as needed. Multimon PC1 was 65 seconds behind and PC2 was 25 seconds ahead of atomic time. Adjusted clocks to within 1 second of atomic time. GRJ13238.207 was submitted as a gap file. Files on PC2 were archived. The AC in the PIT tag room is not functioning properly. I informed COE staff of the problem and they are going to have someone look into it. There are no other problems to report. 08/24/2013 09:22 Alan User: Alan. Site: GRJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 91: Analog comm. 91: Exc. Power low. 08/19/2013 09:13 Alan User: Alan. Site: GRJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 91: Analog comm. 91: Exc. Power low. 08/16/2013 06:02 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/08/16 05:52:05 08/12/2013 06:03 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/08/12 05:01:20 08/12/2013 06:03 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/08/12 04:59:20 08/08/2013 12:02 DGE_Robo SampleGateBypass (SBypass) changed from 'ON' to 'OFF' at 2013/08/08 09:48:01 08/08/2013 12:02 DGE_Robo SampleGateBypass (SBypass) changed from 'OFF' to 'ON' at 2013/08/08 09:44:11 08/07/2013 09:19 Alan User: Alan. Site: GRJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 91: Analog comm. 91: Exc. Power low. 08/05/2013 09:57 rclark Performed site GMC on 8/5/2013. All transceivers were checked for tune and adjusted as needed. Multimon PC1 is 25 seconds and PC2 is 28 seconds behind atomic time. Files on PC2 were archived. There are no problems to report. 07/30/2013 07:21 thumphre User: thumphrey. Site: GRJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 91: Analog comm. 91: Exc. Power low. 07/26/2013 06:35 darren@b A2:InputSyncDetect,A2:ReaderReset: Alarm was generated by a random reader reset. 07/24/2013 07:48 darren@b A1:ReaderReset,A2:InputSyncDetect,A2:InputSyncLost: Alarms caused by a random reader reset. 07/23/2013 07:00 dchase User: dchase. Site: GRJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Alarm is noted and will be investigated during the next site GMC.. Error: 91: Analog comm. 91: Exc. Power low. 07/22/2013 10:06 rclark Performed site GMC on 7/22/2013. All transceivers were checked for tune and adjusted as needed. 10 sticks were thrown on the A and B gates. All sticks were read on all coils and diverted properly. Multimon PC1 was 51 seconds and PC2 was 58 seconds behind atomic time. Adjusted clocks to within 1 second of atomic time. GRJ13203.207 was submitted as a gap file. Files on PC2 were archived. There are no problems to report. 07/16/2013 06:03 DGE_Robo DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/07/16 05:54:41 07/10/2013 10:28 alan@bay 11:ReaderReset,12:InputSyncDetect,12:ReaderReset,21:ReaderReset,22:InputSy ncDetect,22:ReaderReset,23:InputSyncDetect,23:ReaderReset,31:ReaderReset,3 2:InputSyncDetect,32:ReaderReset,51:InputSyncDetect,51:ReaderReset,52:Read erReset,53:ReaderReset,71:ReaderReset,72:InputSyncDetect,72:ReaderReset,81 :ReaderReset,82:InputSyncDetect,82:ReaderReset,91:ReaderReset,92:InputSync Detect,92:ReaderReset,A2:InputSyncDetect,A2:ReaderReset,B2:InputSyncDetect ,B2:ReaderReset,C1:ReaderReset,C2:InputSyncDetect,C2:ReaderReset,D1:InputS yncDetect,D1:ReaderReset,D2:ReaderReset,F1:ReaderReset,F2:InputSyncDetect, F2:ReaderReset: Cleared on new TASS. 07/10/2013 10:02 rclark Performed site GMC on 7/10/2013. All transceivers were checked for tune and adjusted as needed. Multimon PC1 is 30 seconds behind and PC2 was 15 seconds ahead of atomic time. Adjusted PC2 to within 1 second of PC1. Files on PC2 were archived. There are no problems to report. 07/10/2013 09:36 Alan User: Alan. Site: GRJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Trying to turn red lights green-. Error: 91: Analog comm. 91: Exc. Power low. 07/09/2013 08:05 Alan User: Alan. Site: GRJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Alarm caused by short duration power outage.. Error: 91: Analog comm. 91: Exc. Power low. 07/09/2013 06:02 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/07/09 05:08:17 07/09/2013 06:02 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/07/09 05:06:16 07/03/2013 13:21 NTancret Updated M4 SbyC configuration to disable all protocols collecting fish to research tanks. Run of River protocols are still in effect. Updated Multimon database file to remove action codes 38-52 and 55 (disabling collection). Submitted GRJ13184.207 as multimon gap file. 07/03/2013 06:05 rclark User: rclark. Site: GRJ. Antenna Group Name: DIVERSION RIVER EXIT. Antenna: 91. Comments: Noted. Error: 91: Exc. Power low 07/03/2013 06:05 rclark User: rclark. Site: GRJ. Antenna Group Name: DIVERSION RIVER EXIT. Antenna: 91. Comments: Noted. Error: 91: Analog comm 07/02/2013 06:10 rclark User: rclark. Site: GRJ. Antenna Group Name: DIVERSION RIVER EXIT. Antenna: 91. Comments: Noted.. Error: 91: Analog comm. 91: Exc. Power low. 07/01/2013 06:14 rclark User: rclark. Site: GRJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted.. Error: 91: Analog comm. 91: Exc. Power low. 06/27/2013 07:20 Troy@bay F2:InputSyncDetect,F2:ReaderReset: Possible random reader reset. 06/24/2013 10:31 rclark Performed site GMC on 6/24/2013. All transceivers were checked for tune and adjusted as needed. Multimon PC1 was 36 seconds and PC2 was 52 seconds behind atomic time. Adjusted clocks to within 1 second of atomic tim. GRJ13175.206 was submitted as a gap file. Files on PC2 were archived. There are no problems to report. 06/21/2013 18:10 troy@bay 53:ReaderReset: Noted 06/21/2013 15:22 NTancret Updated M4 and Multimon machines to use GRJ13172.DB as new lookup file. This file has had tag codes for ACs 71-75 removed, effectively disabling SbyC for these target groups. Uploaded GRJ13172.208 as multimon gap file. 06/17/2013 10:12 rclark Performed site GMC on 6/17/2013. All transceivers were checked for tune and adjusted as needed. PC1 is 25 seconds and PC2 is 35 seconds behind atomic time. Files on PC2 were archived. There are no problems to report. 06/14/2013 06:07 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/06/14 05:53:13 06/12/2013 06:03 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/06/12 05:53:35 06/12/2013 00:03 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/06/11 22:04:54 06/11/2013 06:02 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/06/11 05:53:50 06/11/2013 00:21 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/06/10 23:31:13 06/10/2013 10:00 rclark Performed site GMC on 6/10/2013. All transceivers were checked for tune and adjusted as needed. Multimon PC1 is 12 seconds and PC2 is 16 seconds behind atomic time. Files on PC2 were archived. There are no problems to report. 06/10/2013 06:02 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/06/10 05:54:36 06/09/2013 21:01 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/06/09 18:38:01 06/09/2013 06:02 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/06/09 05:52:10 06/07/2013 00:02 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/06/06 22:57:46 06/06/2013 06:02 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/06/06 05:54:00 06/06/2013 00:01 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/06/05 21:57:10 06/05/2013 06:02 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/06/05 05:54:41 06/05/2013 00:05 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/06/04 22:28:06 06/04/2013 10:13 thumphre A gate GMC was performed 6/4/2013. Gate tuning was checked on A, B and E gates. The soft close regulators were adjusted on, E gate. Gate times were adjusted as well. See adjustment in gate times below. 0 sticks were thrown on A and B gates and SbyC gates. 25 on the E Gate and 10 on the 2 and 3 way gates. The results are as follows: C1 10 of 10 C2 10 of 10 D1 10 of 10 D2 10 of 10 11 25 of 25 12 24 of 25 31 15 of 15 32 15 of 15 The new gate times are as follows: A Gate Delay Op 0 Travel Open 21 Time Open 95 Travel Close 14 Sec T/O 16 Tert T/O 12 Quat T/O 4 PSI 75 B Gate Delay Op 0 Travel Open 21 Time Open 95 Travel Close 15 Sec T/O 16 Tert T/O 11 Quat T/O 4 PSI 73 E Gate Delay Op 0 (coil to gate time changed from 105 to 110) Travel Open 30 Time Open 185 Travel Close 20 to 18 Sec T/O 20 Tert T/O 17 Quat T/O 8 PSI 75 Sample Delay Op 0 DDS Time Open 190 Travel Open 11 Travel Close 35 PSI 75 2 Way Delay Op 25 Time Open 195 PSI 50 3 Way Delay Op R 2 Time Open R 225 Delay Op L 2 Time Open L 225 PSI 50 E gate was because the facility was in Marking mode. Video was taken of the underside of the E gate for possible modifications. Since the Blue Leaf study is no longer using steelhead there have been no fish in the NOAA tank. No problems to report. 06/04/2013 06:01 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/06/04 05:53:28 06/04/2013 03:01 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/06/04 01:24:06 06/03/2013 09:56 rclark Performed site GMC on 6/3/2013. All transceivers were checked for tune and adjusted as needed. Multimon PC1 was 71 seconds and PC2 was 112 seconds behind atomic time. Adjusted clocks to within 1 second of atomic time. GRJ13154.206 was submitted as a gap file. Files on PC2 were archived. There are no problems to report. 06/03/2013 06:03 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/06/03 05:51:51 06/03/2013 03:04 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/06/03 01:25:00 06/02/2013 06:03 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/06/02 05:50:56 05/31/2013 09:05 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/31 06:25:22 05/31/2013 06:09 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/31 05:55:49 05/30/2013 18:08 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/30 16:39:49 05/30/2013 15:01 NTancret Updated M4 and Multimon systems configuration and lookup files to include a 4th lamprey release group (AC-75) and additional tag codes for AC-71. Uploaded GRJ13150.207 as Multimon gap file. 05/30/2013 06:04 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/30 05:51:32 05/30/2013 00:05 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/29 21:29:46 05/29/2013 06:07 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/29 05:50:52 05/29/2013 03:02 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/29 00:10:00 05/28/2013 12:16 thumphre A site GMC was performed. All transceivers were checked for tune and adjustments made where needed. 10 sticks were thrown on A, B, 2 way and 3 way gates, all were read and diverted properly. No adjustments to timing or air pressure were made. 05/28/2013 09:54 NTancret Updated M4 site configs and Multimon map files to include AC-74 (3rd release of lamprey for Blue Leaf/Biomark study). Both platforms are using GRJ13148.DB as lookup file. Submitted GRJ13148.205 as Multimon gap file. 05/27/2013 21:04 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/27 18:00:01 05/27/2013 18:04 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/27 15:00:01 05/27/2013 15:04 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/27 12:00:01 05/27/2013 12:04 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/27 09:04:10 05/24/2013 09:06 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/24 06:21:22 05/23/2013 18:05 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/23 16:57:15 05/23/2013 09:48 NTancret Edited and submitted GRJ13112.206 to patch some missing observation records in PTAGIS3 that occurred on 4/22/13 when Multimon PC1 had to be hard rebooted. 05/23/2013 09:06 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/23 06:27:29 05/23/2013 08:22 Alan A short duration file gap occurred 5-20-2013 during platform maintenance. Patch file GRJ-2013-140-X-011.xml was submitted to fill that gap. No further problems to report. 05/22/2013 18:07 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/22 17:58:16 05/22/2013 09:08 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/22 06:33:51 05/21/2013 18:07 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/21 17:57:43 05/21/2013 09:08 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/21 06:58:54 05/21/2013 09:08 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/21 06:49:30 05/21/2013 09:08 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/21 06:18:13 05/21/2013 07:17 Troy@bay SLC500:CommsFailure: M4 has control of the gates, not a concern at this time. 05/21/2013 06:21 rclark@b F2:InputSyncDetect,F2:ReaderReset: Transceiver replaced on 5/20/2013. 05/20/2013 21:09 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/20 18:00:01 05/20/2013 18:13 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/20 17:57:43 05/20/2013 16:15 NTancret Updated M4 and Multimon machines to include different tag codes for AC-72 and set up protocol to collect maximum of 50. M4 configs are: GRJ-2013-140-P-1709235496 and GRJ-2013-140-S-1704294345. Multimon map file is GRJ13140.MAP. The lookup file being used by both systems is GRJ13140.DB. Upload GRJ13140.216 as Multimon gap file. When I first logged in to the M4 PCs, I noticed that M4-PC2 had control of the gates. I switched control back to M4-PC1 manually. Will trouble-shoot with Scott on Tuesday. 05/20/2013 11:33 Roger Performed site GMC on 5/20/2013. All transceivers were checked for tune and adjusted as needed. Transceiver F2 was replaced in an attempt to remedy analog comms, exciter low, and reader reset alarms. The fiber modem for transceiver 23 was replaced and the port was moved to 1D on PC1 and PC2 in an attempt to remedy the unknown command errors. File GRJ1340.211 was submitted as a gap file during the change. PC1 is 46 seconds and PC2 is 55 seconds behind atomic time. Files on PC2 were archived. There are no problems to report. 05/20/2013 11:18 scottl Performed gate checks on A and B Separator, 3-way and East RW gates. The COE maintenance people replaced the entire valving assembly on the E. RW gate. Set air pressure to 70 PSI , adjusted the soft close valve and ran 5 sticks in which all were diverted successfully. FYI, the Blue leaf study will be releasing Lampery into the collection channel tonight and then again into the up well just prior to the separator tomorrow night. These fish will have the small 8mm tags and wi;ll hopwfully be diverted into the SByC tanks. No problems to report. Gates are in good working order. 05/20/2013 11:10 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/20 10:41:34 05/20/2013 11:10 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/20 10:37:28 05/20/2013 09:13 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/20 06:00:45 05/19/2013 18:11 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/19 17:57:50 05/18/2013 09:14 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at 2013/05/18 06:00:01 05/18/2013 06:38 rclark User: rclark. Site: GRJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: F2: Analog comm. F2: Exc. Power low. 05/18/2013 06:38 rclark User: rclark. Site: GRJ. Antenna Group Name: . Antenna: No errors were removed. Comments: This will be addressed during the next site visit.. Error: 05/18/2013 06:08 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at 2013/05/18 03:15:02 05/18/2013 03:13 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at 2013/05/18 02:55:35 05/17/2013 09:13 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at 2013/05/17 07:24:30 05/17/2013 09:13 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at 2013/05/17 07:04:24 05/17/2013 06:52 dchase User: dchase. Site: GRJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Alarms will be addressed during the next site visit.. Error: F2: Analog comm. F2: Exc. Power low. 05/17/2013 06:13 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/17 04:30:39 05/17/2013 06:13 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/17 04:30:39 05/17/2013 00:25 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/16 21:00:01 05/16/2013 21:13 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/16 20:21:38 05/16/2013 18:17 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/16 17:57:08 05/16/2013 06:28 rclark@b B2:RocketPortNoEOT: Noted. 05/16/2013 06:20 rclark User: rclark. Site: GRJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: These alarms will be checked during the next site visit.. Error: F2: Analog comm. F2: Exc. Power low. 05/16/2013 06:05 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at 2013/05/16 05:55:58 05/16/2013 06:05 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at 2013/05/16 05:35:05 05/15/2013 21:18 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/15 20:16:04 05/15/2013 21:18 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/15 20:16:04 05/15/2013 21:16 DGE_Robo E_GateTrouble (E_Trouble) changed from 'ON' to 'OFF' at 2013/05/15 18:02:54 05/15/2013 21:16 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/15 18:02:39 05/15/2013 18:17 DGE_Robo E_GateTrouble (E_Trouble) changed from 'OFF' to 'ON' at 2013/05/15 17:58:08 05/15/2013 18:17 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/15 17:54:21 05/15/2013 18:16 DGE_Robo A_GateTrouble (A_Trouble) changed from 'ON' to 'OFF' at 2013/05/15 15:25:57 05/15/2013 18:16 DGE_Robo B_GateTrouble (B_Trouble) changed from 'ON' to 'OFF' at 2013/05/15 15:25:48 05/15/2013 15:02 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at 2013/05/15 14:39:04 05/15/2013 15:02 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at 2013/05/15 14:22:25 05/15/2013 14:22 NTancret Updated M4 configuration and Multimon map file to include AC-72. Was also able to cull the lookup file to below 1 million records and so both platforms are now using the same lookup file: GRJ13135.DB. M4 config files are GRJ-2013-135-P-1439034859 and GRJ-2013-135-S- 1436264109. Multimon map file is GRJ13135.MAP. Uploaded GRJ13135.207 as multimon gap file. 05/15/2013 12:07 DGE_Robo A_GateTrouble (A_Trouble) changed from 'OFF' to 'ON' at 2013/05/15 10:06:13 05/15/2013 12:07 DGE_Robo B_GateTrouble (B_Trouble) changed from 'OFF' to 'ON' at 2013/05/15 10:03:11 05/15/2013 09:18 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/15 08:17:34 05/15/2013 09:18 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/15 08:17:34 05/15/2013 09:16 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at 2013/05/15 06:10:34 05/15/2013 06:33 rclark User: rclark. Site: GRJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted.. Error: F2: Analog comm. F2: Exc. Power low. 05/15/2013 06:14 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at 2013/05/15 05:58:53 05/15/2013 06:14 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at 2013/05/15 05:55:52 05/15/2013 06:14 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at 2013/05/15 05:45:03 05/14/2013 21:12 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/14 20:14:37 05/14/2013 18:02 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/14 17:53:15 05/14/2013 09:13 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/14 07:40:27 05/14/2013 09:13 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/14 07:40:27 05/14/2013 06:06 rclark User: rclark. Site: GRJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted.. Error: F2: Analog comm. F2: Exc. Power low. 05/13/2013 21:08 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/13 20:21:17 05/13/2013 21:08 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/13 20:21:16 05/13/2013 11:46 Troy A and B gates were tuned. The soft close and travel close time was adjusted. The new gate times are as follows: A Gate Delay Op 0 Travel Open 20 - 21 Time Open 95 Travel Close 16 - 14 Sec T/O 16 Tert T/O 12 Quat T/O 4 PSI 75 10 sticks were thrown on A and B gate., 20 sticks on the SbyC/Diversion Gate (2 - Way) and 30 sticks on the SbyC gate. One stick was missed to the default tank. Biomark had 10 sticks with 9mm tags. These sticks were thrown on the 2 and 3 way gates. All were read properly. 2 ended up in the default tank. No problems to report. 05/13/2013 11:19 Roger Performed site GMC on 5/13/2013. All transceivers were checked for tune and adjusted as needed. The Y cable for transceiver 23 was replaced in an attempt to eliminate the unknown command errors on this transceiver. Troy and Scott performed a stick tag test on raceway west - river exit. 21 - 8 of 10 22 - 9 of 10 23 - 7 of 10 The poor results may be due to the low water level in the raceway causing tag orientation issues. PC1 is 33 and PC2 is 37 seconds behind atomic time. There are no problems to report. 05/13/2013 08:46 NTancret Updated M4 machines to use M4_GRJ_Lookup_20130513.csv as lookup and Multimon machines to use GRJ13133.DB as database file. These files contain additional tag codes for ACs 254 and 255 for minichip stick tag tests. 05/12/2013 21:09 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/12 20:52:42 05/12/2013 21:09 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/12 20:52:43 05/12/2013 21:09 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/12 20:34:47 05/12/2013 21:09 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/12 20:34:47 05/10/2013 00:37 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/09 21:01:40 05/09/2013 18:10 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/09 17:59:08 05/09/2013 14:35 thumphre Adjusted the time open on the 2 way gate from 200 to 195 in an attempt to lower the by catch. 05/09/2013 06:26 scottl@b SLC500:CommsFailure: Noted 05/09/2013 06:25 scottl@b SLC500:CommsFailure: Noted 05/09/2013 06:20 scottl User: scottl. Site: GRJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: F2: Analog comm. F2: Exc. Power low. 05/09/2013 03:29 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/09 00:00:01 05/09/2013 00:12 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/08 21:46:35 05/08/2013 18:06 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/08 17:58:11 05/08/2013 10:58 NTancret Updated M4 machines to use M4_GRJ_Lookup_20130508.csv as lookup file. Updated Multimon machines to use GRJ13128.DB as database file. These files contain additional tag codes for AC-71. Submitted GRJ13128.206 as Multimon gap file. 05/08/2013 07:07 scottl User: scottl. Site: GRJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: A1: Lithium low. F2: Analog comm. F2: Exc. Power low. 05/08/2013 00:08 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/07 22:06:09 05/07/2013 18:06 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/07 17:59:57 05/07/2013 06:02 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/07 05:46:08 05/07/2013 06:02 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/07 05:46:07 05/07/2013 00:11 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/06 22:07:48 05/06/2013 21:06 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/06 18:00:08 05/06/2013 14:40 rclark@b 23:InputSyncDetect,23:ReaderReset,51:InputSyncDetect,51:InputSyncLost,52:R eaderReset,A1:LowLithium,A1:ReaderReset,A2:InputSyncDetect,A2:InputSyncLos t: On 5/6/2013 transceiver 23 was replaced and the lithium battery was replaced on A1. The errors on 51 and 52 are due to a random reader reset. 05/06/2013 12:02 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/06 09:53:29 05/06/2013 12:02 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/06 09:53:28 05/06/2013 12:02 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/05/06 09:47:31 05/06/2013 12:02 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/05/06 09:47:29 05/06/2013 12:02 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/05/06 09:46:48 05/06/2013 12:02 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/05/06 09:46:47 05/06/2013 12:02 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/05/06 09:46:24 05/06/2013 12:02 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/05/06 09:46:22 05/06/2013 10:45 Troy A gate GMC was performed 5/06/2013. Gate tuning was checked on E gate, the Sample Gate and the 3 way gate. The Sample gate was not engaging the soft close/open when it was coming out of sample so the travel close was decreased. The soft close regulator was adjusted as well. E Gate and SbyC Gate times were adjusted as well. See adjustment in gate times below. 10 sticks were thrown on the SbyC gates, 5 left and 5 right. One right stick end up in the default tank. 5 sticks were thrwon on the E Gate, all were diverted properly: A1 none thrown A2 none thrown B1 none thrown B2 none thrown C1 10 of 10 C2 10 of 10 D1 10 of 10 D2 10 of 10 11 5 of 5 12 5 of 5 31 5 of 5 32 5 of 5 The gate times are as follows: A Gate Delay Op 0 Travel Open 20 Time Open 95 Travel Close 16 Sec T/O 16 Tert T/O 12 Quat T/O 4 PSI 75 B Gate Delay Op 0 Travel Open 21 Time Open 95 Travel Close 15 Sec T/O 16 Tert T/O 11 Quat T/O 4 PSI 73 Sample Delay Op 0 DDS Time Open 190 Travel Open 11 Travel Close 35 - New PSI 75 E Gate Delay Op 1 Travel Open 30 Time Open 185 was 175 Travel Close 20 was 22 Sec T/O 20 Tert T/O 17 Quat T/O 8 PSI 60 2 Way Delay Op 25 Time Open 200 PSI 50 3 Way Delay Op R 2 Time Open R 225 was 200 Delay Op L 2 was 10 Time Open L 225 was 195 PSI 50 E gate was tested by switching to Marking mode with the Sep Op's permission. When testing was done it was returned to General Collection. It was notice that A1 had a low lithium alarm. The battery was replaced with one found in the locker. No other problems to report. From Roger: Checked all transceivers for tune. Replace transceiver 23. Multimon PC1 is 21 seconds and PC2 was 63 seconds behind atomic time. Adjusted PC2 to within 1 second of PC1. Archived files on PC2. There are no problems to report 05/06/2013 09:16 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/06 08:50:50 05/06/2013 09:16 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/06 08:36:12 05/06/2013 06:14 scottl User: scottl. Site: GRJ. Antenna Group Name: A-SEPARATOR GATE. Antenna: A1. Comments: Will replace battery opn the next site visit. Error: A1: Lithium low 05/06/2013 03:02 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/06 00:43:25 05/05/2013 21:02 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/05 18:52:37 05/05/2013 07:28 dchase User: dchase. Site: GRJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: The low lithium alarm will be addressed during the next site visit.. Error: A1: Lithium low. F2: Analog comm. F2: Exc. Power low. 05/04/2013 07:29 dchase User: dchase. Site: GRJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Cleared alarms on older TASS.. Error: F2: Analog comm. F2: Exc. Power low. A1: Lithium low. 05/04/2013 07:18 darren@b 72:InputSyncDetect,72:ReaderReset,A1:LowLithium: Alarms on 72 were generated by a reader reset. The Low lithium will be addressed during the next site visit. 05/03/2013 09:02 DGE_Robo BypassMode (BypassMode) changed from 'ON' to 'OFF' at 2013/05/03 07:46:34 05/03/2013 09:02 DGE_Robo BypassMode (BypassMode) changed from 'OFF' to 'ON' at 2013/05/03 07:46:34 05/03/2013 09:02 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/03 07:46:28 05/03/2013 09:02 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/03 07:46:27 05/03/2013 06:18 darren@b A1:LowLithium: Alarm noted. 05/03/2013 06:14 darren@b 23:InputSyncDetect,23:ReaderReset,A1:LowLithium: These alarms will be addressed during the next site GMC. 05/03/2013 00:14 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/02 23:05:12 05/02/2013 18:02 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/02 17:52:22 05/02/2013 18:02 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/02 15:11:04 05/02/2013 14:27 Troy Increased the 'extra time' timer from 90 to 105 in another attempt to improve E Gate. A cover has been put over the flume section so the extra time should put the fish almost to the gate prior to opening. The long time open was left in place. 05/02/2013 13:53 Scott_Li Issued a reader reset command to unit 23. Timer tag fired after that , issued status report, no problems detected. The unknown command and ? for help is no longer being displayed. Will monitor. 05/02/2013 06:38 dchase User: dchase. Site: GRJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Alarms will be addressed during the next site visit.. Error: F2: Analog comm. F2: Exc. Power low. 05/01/2013 18:02 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/05/01 17:53:20 05/01/2013 06:39 dchase User: dchase. Site: GRJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: These alarms were addressed yesterday during a site GMC.. Error: F2: Analog comm. F2: Exc. Power low. 05/01/2013 03:03 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/05/01 01:40:00 04/30/2013 18:02 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/04/30 17:56:13 04/30/2013 12:40 Darren A site GMC was performed today 4-30-13. All transceivers were checked for tuning and noise. The mode was switched for General Collection to Marking Mode so that E gate could be tested. Fish were being put into Raceway 10 as part of the GC Mode so this had no effect on facility operations. Several sticks were thrown on E gate to try and optimize the timing. The travel close was increased as the gate was in the 'soft close' mode for too long. I will talk to the facility about possibly covering the ~10 feet between exit of the monitor to the gate to see if this might help. The facility was returned to General Collection. Several sticks were thrown on A gate as it was having issues. It was found that the first sensor was too close to the flag's 'home' position so occasionally if the timing was just right it would fire the gate and think that it need to use secondary travel open time which would not open the gate far enough which in turn made the travel close time too long. The first and second sensors were moved and fixed the problem. Several sticks were thrown on the 2-way and 3-way gates in preparation for the micro tag(nano tag) stick test. Some adjustments were made to the timing of the 3-way gate in the right direction. Basically the issue is water flow. If you throw one stick at a time the timing is great. If two sticks come in close to each other there is a lot more water and velocity so the sticks end up hitting the end of the gate and going to the default tank. 10 sticks with micro tags were thrown on A gate, all were read and all were diverted. The same 10 sticks were thrown on the 2-way and 3-way. All were read and all were diverted. The sticks were thrown in file GRJ-2013- 120-S-014 (P-013) and MM GRJ13120.208 (.107) F2 was investigated and it was found that all the screws were loose for all the boards. These were tightened. 04/30/2013 12:02 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/04/30 11:44:15 04/30/2013 12:01 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/04/30 10:30:35 04/30/2013 09:55 testing Updated M4 and Multimon lookup files to M4_GRJ_Lookup_20130430.csv and GRJ13120.DB. These files include 10 additional tag codes in ACs 254 and 255 for the stick test at LGR. I also added the 10 tag codes to the StickTags-April2013.txt file located on the ftp site and on the M4 PCs. 04/30/2013 06:24 dchase User: dchase. Site: GRJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: These alarms will be investigated today during a site GMC.. Error: F2: Analog comm. F2: Exc. Power low. F2: Sys. Power low. 04/30/2013 00:13 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/04/29 21:30:44 04/29/2013 18:04 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/04/29 17:58:01 04/29/2013 13:44 Troy E Gate's times were remotely adjusted due to the lower than desired gate efficiency last night while in Marking Mode. The coil delay timer was reduced from 100 to 90. The Delay Op was reduced from 5 to 0 and the Time Open was increased from 135 to 150. I will be onsite tomorrow to test these new times. 04/29/2013 03:09 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/04/29 01:42:28 04/28/2013 21:01 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/04/28 19:36:52 04/28/2013 21:01 DGE_Robo BypassMode (BypassMode) changed from 'ON' to 'OFF' at 2013/04/28 19:36:52 04/28/2013 21:01 DGE_Robo BypassMarking (BypassMarking) changed from 'ON' to 'OFF' at 2013/04/28 19:36:52 04/28/2013 21:01 DGE_Robo BypassMode (BypassMode) changed from 'OFF' to 'ON' at 2013/04/28 19:36:52 04/28/2013 21:01 DGE_Robo BypassMarking (BypassMarking) changed from 'OFF' to 'ON' at 2013/04/28 19:19:32 04/28/2013 21:01 DGE_Robo BypassMode (BypassMode) changed from 'ON' to 'OFF' at 2013/04/28 19:19:32 04/28/2013 21:01 DGE_Robo BypassMode (BypassMode) changed from 'OFF' to 'ON' at 2013/04/28 19:19:32 04/28/2013 21:01 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/04/28 19:19:32 04/28/2013 18:01 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/04/28 16:56:11 04/28/2013 15:01 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/04/28 12:56:19 04/28/2013 15:01 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/04/28 12:56:19 04/27/2013 06:01 DGE_Robo BypassMode (BypassMode) changed from 'ON' to 'OFF' at 2013/04/27 05:55:05 04/26/2013 08:14 thumphre User: thumphrey. Site: GRJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Cleared using old TASS. Error: F2: Analog comm. F2: Exc. Power low. 04/26/2013 07:04 Troy Addendum to the previous pitevent. The S machine was configured correctly so no change was made to it's configuration. The P machines new configuration was pushed up to the ftp server. 04/26/2013 07:03 Troy Made a correction to the site configuration, Divert During Subsample was changed to Divert During Subsample Unit 1. This was done to match the DGE configuration. 04/26/2013 03:01 DGE_Robo BypassMarking (BypassMarking) changed from 'ON' to 'OFF' at 2013/04/26 01:57:08 04/26/2013 03:01 DGE_Robo BypassMode (BypassMode) changed from 'OFF' to 'ON' at 2013/04/26 01:57:08 04/25/2013 18:01 DGE_Robo BypassMarking (BypassMarking) changed from 'OFF' to 'ON' at 2013/04/25 16:57:42 04/25/2013 18:01 DGE_Robo BypassMode (BypassMode) changed from 'ON' to 'OFF' at 2013/04/25 16:57:42 04/25/2013 08:00 thumphre User: thumphrey. Site: GRJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be investigated on the next site visit.. Error: F2: Analog comm. F2: Exc. Power low. 04/24/2013 13:39 Nicole Updated M4 machines to use M4_GRJ_Lookup_20130424.csv as the lookup file. This file contains ~314,000 fish for AC-56 that are not in the DB files being used by Multimon, due to the tag code limit of 1 million. This may cause the old DGE report to report lower efficiency numbers for any AC-56 tag codes that go through GRJ. 04/24/2013 13:18 scottl On site to time and test the East raceway gate. Multiple tests were conducted and timing adustments made. Slight progamming changes were made to the C2C times etc.. Gate is fucntioning as well as could be expected. Also, responding to Doug Marsh issue regarding non target fish in his tank, multple stick tag test and timing adjustments were made. It appears the issue is with steelhead swimming back up the flume and somehow making their way to the opposite side od the diversion system. Nets were placed over the top of the pens and counters made available. Also, a flap was installed on the right tank flume exit to help prevent fish from swimming back up the pipe. Will monitor for re-occurring events. 04/24/2013 12:02 DGE_Robo BypassMode (BypassMode) changed from 'OFF' to 'ON' at 2013/04/24 10:08:27 04/24/2013 12:02 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/04/24 10:08:26 04/24/2013 12:01 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/04/24 09:03:28 04/24/2013 12:01 DGE_Robo BypassMode (BypassMode) changed from 'ON' to 'OFF' at 2013/04/24 09:03:27 04/23/2013 09:14 Troy A minor typo was found in the S machine site configuration in regard to the PLC Messages. This was corrected and the new configuration was pushed to the ftp server. 04/23/2013 08:59 Troy@bay SLC500:CommsFailure: Not of concern at this time as M4 has control of the gates. 04/23/2013 03:02 DGE_Robo BypassMarking (BypassMarking) changed from 'ON' to 'OFF' at 2013/04/23 01:57:47 04/23/2013 03:02 DGE_Robo BypassMode (BypassMode) changed from 'OFF' to 'ON' at 2013/04/23 01:57:47 04/22/2013 20:01 DGE_Robo BypassMarking (BypassMarking) changed from 'OFF' to 'ON' at 2013/04/22 17:57:40 04/22/2013 20:01 DGE_Robo BypassMode (BypassMode) changed from 'ON' to 'OFF' at 2013/04/22 17:57:40 04/22/2013 17:38 Nicole Updated Multimon and M4 machines to use GRJ13112.DB as lookup file, which adds 5800 tag codes to AC-71. This last minute update needed to be accomplished tonight because some fish with these tag codes will be released tomorrow morning. I was unable to PCA into Multimon PC1 at first so I called Alan, who made contact with the separator operator and instructed him to do a hard reboot on PC1. I was then able to PCA into PC1, but Multimon would not take any keyboard commands, so I restarted the computer from the Windows start menu. I was unable to exit out of Multimon gracefully before rebooting the computer. After this reboot I was able to work normally in PC1 and was able to accomplish the database file update. The two reboots resulted in two files that needed File Close lines: GRJ13112.106 and 107. I appended closing lines to those files and submitted them to PTAGIS. When the first reboot happened, I was watching PC2 and no tags were detected during the reboot time. File GRJ13112.208 filled the gap for the 2nd reboot. File GRJ13112.211 filled the gap for updating the database file on PC1. There were no problems with updating the M4 lookup files. 04/22/2013 12:52 Troy At the site to investigate the 3 way gate. Modified the HMI so that site personell can access a page that shows the bit count(fish read per coil) and a count of the number of times a gate fired (this would include test button pushes). It will keep track of those counts for 24 hours, 0700 to 0700. It will then move those counts to 'yesterday' and start counting again. This will hopefully help in determining if the 3 way gate is missing fish or putting fish in the wrong tank. From my investigation it does not appear that M4 or the PLC are putting fish in the wrong tank. There may be some 'misses' and bycatch but I don't beleive the gates are rotating incorrectly. Nets were placed over the left and center (sbyc Right) tanks and the default tank was left uncovered. The configuration for the P and S machines were corrected and pushed up to the ftp server. I gave my card to the group doing the sbyc study and encouraged them to let us know if their fish are going to the wrong tank. No problems to report. 04/22/2013 11:32 Troy Testing the M4 Comm's loss email. Please ignore the alarm. Communication is fine. 04/22/2013 09:59 Roger Performed site GMC on 4/22/2013. All transceivers were checked for tune and adjusted as needed. PC1 is 17 seconds and PC2 is 33 second behind atomic time. Files on PC2 were archived. There are no problems to report. 04/22/2013 06:39 thumphre User: thumphrey. Site: GRJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: F2: Analog comm. F2: Exc. Power low. 04/19/2013 15:30 Nicole Updated the SbyC configurations on M4 and Multimon machines so that AC71 will only be collected between the hours of 06:00 PST and 14:00 PST. The new M4 configurations are GRJ-2013-109-P-1611154444 and GRJ-2013-109-S- 1608287795. I restarted all services on the M4 machines after editing the SbyC configurations. The new Multimon map file is GRJ13109.MAP. I had to upload three different Multimon PC2 files as gaps files: GRJ13109.207, 208, and 210. I noticed that the M4 PLC configurations are different between M4 PC1 and PC2. I spoke with Troy about this and he will investigate these settings on Monday. 04/17/2013 15:02 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/04/17 14:52:51 04/17/2013 15:02 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/04/17 14:50:51 04/17/2013 15:02 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/04/17 13:59:43 04/17/2013 15:02 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/04/17 13:57:43 04/15/2013 16:15 NTancret Updated M4 machines to use site configs GRJ-2013-105-P-1628446009 and GRJ- 2013-105-S-1626536794. Lookup file is GRJ13105.DB. Updated Multimon machines to use GRJ13105.MAP and GRJ13105.DB. Uploaded GRJ13105.209 as Multimon gap file. 04/15/2013 13:10 Roger Correction for previous PIT event. The date should be 4/15/2013. 04/15/2013 11:04 Roger Performed site GMC on 4/14/2013. All transceivers were checked for tune and adjusted as needed. 10 sticks were thrown on the A and B gates. All sticks were read on all transceivers and diverted properly. PC1 is 3 seconds and PC2 is 17 seconds behind atomic time. Files on PC2 were archived. There are no problems to report. 04/15/2013 08:53 Alan No PIT tag detections occurred during the M4 upgrade on 4/12/2013. 04/14/2013 08:18 dchase User: dchase. Site: GRJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: The alarms on F2 will be investigated during the next site visit. The other alarms are older and will be cleared.. Error: F2: Analog comm. F2: Exc. Power low. C1: Test Tag Failed. D1: Test Tag Failed. F2: Exc current low. 04/13/2013 07:21 darren@b F2:LowExcCurrent: Old alarm and only one instance of the alarm. PSMFC was onsite to do site maintenance on Friday 4-12-13. 04/12/2013 17:36 Nicole Updated M4 machines to use site configs GRJ-2013-102-P-1806250508 and GRJ- 2013-102-S-1808002698, and lookup file GRJ13102.DB. Updated Mulitmon machines to use GRJ13102.MAP and GRJ13102.DB. Submtted GRJ13102.208 as Multimon gap file. 04/12/2013 08:59 Troy Upgraded the M4 machines to version 1.5.4.0. The S file GRJ-2013-102-S- 012 can be used to patch the gap although no traffic was witnessed on the S machine while the P machine was being upgraded. The clocks were verified to be set to recognize DST and are pointing to pool.npt for synchronization. 04/08/2013 12:24 Roger performed site GMC on 4/8/2013. All transceivers were checked for tune and adjusted as needed, 9 sticks were thrown on the A gate, and 10 sticks on the B gate. Sticks were read on all coils and diverted properly. Interrogation was stopped and started on PC1 and PC2 to correct for DST. PC1 was rebooted to re-enable communication with PCAnywhere. GRJ13098.207 was submitted as a gap file. Outstanding files on PC2 were archived. There are no problems to report. 04/08/2013 07:33 Alan I was not able to remote into MCJ-PC1 or GRJ-PC1 to perform "SOP Daylight Savings Time Adjustments". PC2 at both sites were verified as to being backup PCs and actively collecting data. PTAGIS Field Operations personnel will be onsite today and will investigate these situations further. 04/04/2013 10:32 Troy At the site to check the gates and M4. Modified the PLC C2C calculation logic. This has no effect on the C2C times, it is just a calculation. This change may lead to being able to remove a few rungs in the overall logic. PSMFC will monitor. 10 sticks were thrown on B gate, B2 missed one. 9 sticks were thrown on A gate all were read and diverted properly. C1,C2, and D1,D2 saw 19 sticks, the three way gate missed on diversion to the left. No problems to report. 04/01/2013 13:29 NTancret Updated M4 and Multimon machines to use GRJ13088.DB as lookup file. Uploaded GRJ13091.207 as gap file for Multimon machines. 04/01/2013 12:56 Troy It was discovered that there was an issue with M4's Site Configuration. 31, 32 were assigned to Raceway East 31, 32 were re-assigned to East Raceway 10 71,72 were assigned to Bypass River Exit 71,72 were re-assigned to Raceway East 81,82 were assigned to East Raceway 10 81,82 were re-assigned to Bypass River Exit File GRJ-2013-091-S-015 is the first file to reflect this change. GRJ-2013-091-S-1343051011-SiteConfig is the first Site Configuration with this change on the Secondary machine. File GRJ-2013-091-P015 is the second file to reflect this change. GRJ-2013-091-P-1350390034-SiteConfig is the first Site Configuration with this change on the Primary machine. None of these changes should affect SbyC as none control gates and this is strictly a M4 issue. The new configurations were exported and uploaded to ptagis. 04/01/2013 06:13 rclark@b 71:ReaderReset,72:InputSyncDetect,72:InputSyncLost,C1:TestTagFailure,D1:Te stTagFailure: 71 and 72 - caused by random reader reset, C1, D1 - caused during stick testing. 03/31/2013 09:59 scottl@b B2:InputSyncDetect,B2:ReaderReset: Noted, detection efficiencies are not effected. 03/29/2013 12:48 Troy At the site to tune the gates. Several sticks were lost in this endeavor. Basically, M4 appears to be faster than MM as I was missing sticks with M4 on the SbyC (2 way gate) but not with MM. Finally found someone to throw sticks for me so I could see how late M4 was, turns out it wasn't late but early and the gate was closing as the stick went through. Adjusted the times as needed, put in a Delay_op of 25 and a Time_Open of 200.(May effect MM if it has to take over the gates). I timed the 3-way gate by shutting air off to the 2-way, rolling the gate and throwing sticks into the 2-way. I did this because I was still periodically missing sticks on the 2-way. Found the flush water to be too high, causing sticks to come back up the pipe and then to the river. Obtained permission to cut back the flush water and that system started to work properly. Missed one stick on A gate due to hardly any flow. After much trouble shooting found the exit of the separator to be clogged with debris. Threw sticks on A and B gates and all were diverted properly. No other problems to report other than we are down to 19 sticks here at GRJ. 03/28/2013 16:18 NTancret Updated M4 SbyC configuration to send PTAGIS stick tags into the correct tanks (254 goes left, 255 goes right) and to use GRJ13087.DB as the lookup file. Exported the site config files and uploaded them to the ftp site. Updated Multimon machines to use GRJ13087.DB database file. Reset PC1 and PC2 clocks to be within one second of each other and atomic time. They were 18 and 9 seconds behind atomic time, respectively. Uploaded GRJ13087.208 as gap file. 03/26/2013 15:00 rclark@b 21:RocketPortNoEOT: Caused by remote database update. 03/26/2013 12:02 DGE_Robo SByC_Enable (SBC) changed from 'OFF' to 'ON' at 2013/03/26 10:01:07 03/26/2013 10:43 NTancret Updated M4 machines to use site configs GRJ-2013-085-P-0935044327 and GRJ- 2013-085-S-0927510976 and lookup file GRJ_Lookup_20130325.csv. Updated Multimon machines to use GRJ13085.MAP and GRJ13085.DB. PC2 was found to not be communicating with the transceivers. Kennewick was informed and is investigating. 03/26/2013 10:34 Troy PC2 was found to not be communicating with the transceivers. It was communicating with the PLC but not PC1 and it appears none of the transceivers. I could not send a command to A1. I remotely rebooted the machine and everything seems to have come back as it should. PSMFC will monitor. 03/26/2013 07:06 thumphre User: thumphrey. Site: GRJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Site up for the season, clearing TASS. Error: F2: Exc current low. 53: Test Tag Failed. D1: Analog comm. 11: Analog comm. 11: Exc. Power low. F2: Analog comm. C1: Exc. Power low. D1: Exc. Power low. F2: Exc. Power low. C1: Analog comm. D2: Analog comm. D2: Exc. Power low. 03/26/2013 07:05 thumphre User: thumphrey. Site: GRJ. Comments: Site watered up in Bypass. Event date: 3/18/2013 9:00:00 AM. 03/25/2013 18:00 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/03/25 15:44:24 03/25/2013 18:00 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/03/25 15:42:24 03/25/2013 12:14 Roger Performed site GMC on 3/25/2013. All transceivers were checked for tune and adjusted as needed. Threw 10 sticks on the A and B gates. All sticks were read on all transceivers and diverted properly. The Multimon annual reset was performed on PC1 and PC2. Total commander was installed on M4 PC1 and PC2. There are no problems to report. 03/25/2013 06:01 DGE_Robo SampleGateBypass (SBypass) changed from 'ON' to 'OFF' at 2013/03/25 05:52:54 03/22/2013 09:26 Alan Site personnel report that the facility is currently being powered through a secondary transformer. They will be switching back to the primary transformer Monday. We could still see some UPS alerts in the meantime. 03/21/2013 10:10 Scott_Li Re-directed the Network Time Protocol to synchronize to Pool.NTP.org Set task scheduler to trigger the time synchronization process every day and re-occur every hour indefinitely. Also turned on the history logging within task scheduler. This should keep the two M4 PC's in perfect time with each other and the atomic clock. 03/21/2013 07:02 alan@bay 21:ReaderReset,22:InputSyncDetect,22:InputSyncLost: These alarms are the result of a random reader reset. PSMFC and Destron Fearing are aware of the problem. 03/20/2013 06:01 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/03/20 04:15:08 03/20/2013 06:01 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/03/20 04:13:08 03/19/2013 13:28 Alan A GMC was performed 3/19/2013. All transceivers were checked and tuned as necessary. outstanding files on PC2 were archived. Both PCs (PC1: -3:05, PC2: -3:57) were adjusted to within one second of atomic time. The facility is in secondary bypass. No sticks were thrown at the request of site personnel. No problems found. 03/19/2013 07:14 Alan The facility watered up for the season at ~0930 PDT 3-18-2013. They are still stabilizing the facility and expect to begin sampling 3/23 or 3/24. 03/18/2013 09:04 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at 2013/03/18 08:22:38 03/18/2013 09:04 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at 2013/03/18 08:12:18 03/18/2013 09:04 DGE_Robo BypassMarking (BypassMarking) changed from 'ON' to 'OFF' at 2013/03/18 06:59:37 03/18/2013 09:04 DGE_Robo BypassMode (BypassMode) changed from 'OFF' to 'ON' at 2013/03/18 06:59:37 03/18/2013 09:04 DGE_Robo BypassMarking (BypassMarking) changed from 'OFF' to 'ON' at 2013/03/18 06:59:32 03/18/2013 09:04 DGE_Robo BypassMode (BypassMode) changed from 'ON' to 'OFF' at 2013/03/18 06:59:32 03/11/2013 12:04 DGE_Robo SampleGateBypass (SBypass) changed from 'OFF' to 'ON' at 2013/03/11 10:26:17 03/11/2013 12:04 DGE_Robo SampleGateBypass (SBypass) changed from 'ON' to 'OFF' at 2013/03/11 10:26:10 03/11/2013 07:18 Troy@bay F2:LowExcCurrent: Noted 03/06/2013 15:07 Scott_Li On all M4 SByC PC's, set the time Sync process to run every 1 hrs rather than the default of 1 time per week. This is an attempt to keep the M4 clustering as synchronized as possible. 03/05/2013 12:04 DGE_Robo BypassMarking (BypassMarking) changed from 'ON' to 'OFF' at 2013/03/05 10:46:44 03/05/2013 12:04 DGE_Robo BypassMode (BypassMode) changed from 'OFF' to 'ON' at 2013/03/05 10:46:44 03/05/2013 12:04 DGE_Robo BypassMarking (BypassMarking) changed from 'OFF' to 'ON' at 2013/03/05 10:46:43 03/05/2013 12:03 DGE_Robo BypassMode (BypassMode) changed from 'ON' to 'OFF' at 2013/03/05 10:46:43 02/27/2013 07:26 scottl@b 11:ReaderReset,12:InputSyncDetect,12:ReaderReset,21:ReaderReset,22:InputSy ncDetect,22:ReaderReset,23:InputSyncDetect,23:ReaderReset,31:ReaderReset,3 2:InputSyncDetect,32:ReaderReset,51:InputSyncDetect,51:ReaderReset,52:Read erReset,53:ReaderReset,71:ReaderReset,72:InputSyncDetect,72:ReaderReset,81 :ReaderReset,82:InputSyncDetect,82:ReaderReset,91:ReaderReset,92:InputSync Detect,92:ReaderReset,A2:InputSyncDetect,A2:ReaderReset,B2:InputSyncDetect ,B2:ReaderReset,C1:ReaderReset,C2:InputSyncDetect,C2:ReaderReset,D1:InputS yncDetect,D1:ReaderReset,D2:ReaderReset,F1:ReaderReset,F2:InputSyncDetect, F2:ReaderReset: Power outage: 2013/02/26 12:10:26 --> set to 'ON' 2013/02/26 11:49:30 --> set to 'OFF' 02/26/2013 15:03 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/02/26 12:08:26 02/26/2013 15:03 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/02/26 11:47:31 02/26/2013 03:03 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/02/26 02:59:18 02/26/2013 03:03 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/02/26 02:57:17 02/25/2013 12:03 DGE_Robo BypassMode (BypassMode) changed from 'OFF' to 'ON' at 2013/02/25 10:58:46 02/25/2013 12:03 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/02/25 10:58:41 02/25/2013 12:03 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/02/25 10:58:30 02/25/2013 12:03 DGE_Robo BypassMode (BypassMode) changed from 'ON' to 'OFF' at 2013/02/25 10:58:20 02/25/2013 12:03 DGE_Robo BypassMode (BypassMode) changed from 'OFF' to 'ON' at 2013/02/25 10:58:14 02/25/2013 12:03 DGE_Robo BypassMarking (BypassMarking) changed from 'ON' to 'OFF' at 2013/02/25 10:58:14 02/25/2013 12:03 DGE_Robo BypassMarking (BypassMarking) changed from 'OFF' to 'ON' at 2013/02/25 10:58:05 02/25/2013 12:03 DGE_Robo BypassMode (BypassMode) changed from 'ON' to 'OFF' at 2013/02/25 10:58:04 02/25/2013 12:03 DGE_Robo BypassMode (BypassMode) changed from 'OFF' to 'ON' at 2013/02/25 10:57:52 02/25/2013 12:03 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/02/25 10:57:50 02/25/2013 12:03 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/02/25 10:57:37 02/25/2013 12:03 DGE_Robo BypassMode (BypassMode) changed from 'ON' to 'OFF' at 2013/02/25 10:57:35 02/25/2013 12:03 DGE_Robo BypassMarking (BypassMarking) changed from 'ON' to 'OFF' at 2013/02/25 10:57:33 02/25/2013 12:03 DGE_Robo BypassMode (BypassMode) changed from 'OFF' to 'ON' at 2013/02/25 10:57:33 02/25/2013 12:03 DGE_Robo BypassMarking (BypassMarking) changed from 'OFF' to 'ON' at 2013/02/25 10:57:26 02/25/2013 12:03 DGE_Robo BypassMode (BypassMode) changed from 'ON' to 'OFF' at 2013/02/25 10:57:26 02/25/2013 12:03 DGE_Robo BypassMode (BypassMode) changed from 'OFF' to 'ON' at 2013/02/25 10:57:21 02/25/2013 12:03 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/02/25 10:57:19 02/25/2013 12:03 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/02/25 10:57:13 02/25/2013 12:03 DGE_Robo BypassMode (BypassMode) changed from 'ON' to 'OFF' at 2013/02/25 10:57:12 02/25/2013 12:03 DGE_Robo BypassMarking (BypassMarking) changed from 'ON' to 'OFF' at 2013/02/25 10:57:01 02/25/2013 12:03 DGE_Robo BypassMode (BypassMode) changed from 'OFF' to 'ON' at 2013/02/25 10:57:01 02/25/2013 12:03 DGE_Robo BypassMarking (BypassMarking) changed from 'OFF' to 'ON' at 2013/02/25 10:39:13 02/25/2013 12:03 DGE_Robo BypassMode (BypassMode) changed from 'ON' to 'OFF' at 2013/02/25 10:39:13 02/25/2013 12:03 DGE_Robo BypassMode (BypassMode) changed from 'OFF' to 'ON' at 2013/02/25 10:39:12 02/25/2013 12:03 DGE_Robo BypassMode (BypassMode) changed from 'ON' to 'OFF' at 2013/02/25 10:39:12 02/25/2013 12:03 DGE_Robo DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/02/25 10:34:30 02/25/2013 12:03 DGE_Robo SampleGateBypass (SBypass) changed from 'OFF' to 'ON' at 2013/02/25 10:34:28 02/25/2013 12:03 DGE_Robo E_GateTrouble (E_Trouble) changed from 'ON' to 'OFF' at 2013/02/25 10:26:44 02/25/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/25 10:22:56 02/25/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/25 10:22:52 02/25/2013 12:03 DGE_Robo SampleGateBypass (SBypass) changed from 'ON' to 'OFF' at 2013/02/25 10:22:44 02/25/2013 12:03 DGE_Robo SampleGateBypass (SBypass) changed from 'OFF' to 'ON' at 2013/02/25 10:22:32 02/25/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/25 10:22:29 02/25/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/25 10:19:45 02/25/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/25 10:19:41 02/25/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/25 10:19:38 02/25/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/25 10:18:54 02/25/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/25 10:18:46 02/25/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/25 10:18:33 02/25/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/25 10:17:58 02/25/2013 12:03 DGE_Robo SampleGateBypass (SBypass) changed from 'ON' to 'OFF' at 2013/02/25 10:14:42 02/25/2013 12:03 DGE_Robo DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/02/25 10:14:39 02/25/2013 12:03 DGE_Robo BypassMarking (BypassMarking) changed from 'ON' to 'OFF' at 2013/02/25 10:13:30 02/25/2013 12:03 DGE_Robo BypassMode (BypassMode) changed from 'OFF' to 'ON' at 2013/02/25 10:13:30 02/25/2013 12:03 DGE_Robo BypassMarking (BypassMarking) changed from 'OFF' to 'ON' at 2013/02/25 10:13:29 02/25/2013 12:03 DGE_Robo BypassMode (BypassMode) changed from 'ON' to 'OFF' at 2013/02/25 10:13:29 02/25/2013 12:03 DGE_Robo BypassMode (BypassMode) changed from 'OFF' to 'ON' at 2013/02/25 10:13:27 02/25/2013 12:03 DGE_Robo BypassMode (BypassMode) changed from 'ON' to 'OFF' at 2013/02/25 10:13:26 02/14/2013 12:03 DGE_Robo SampleGateBypass (SBypass) changed from 'OFF' to 'ON' at 2013/02/14 11:00:36 02/14/2013 12:03 DGE_Robo BypassMarking (BypassMarking) changed from 'ON' to 'OFF' at 2013/02/14 10:59:38 02/14/2013 12:03 DGE_Robo BypassMode (BypassMode) changed from 'OFF' to 'ON' at 2013/02/14 10:59:38 02/14/2013 12:03 DGE_Robo BypassMarking (BypassMarking) changed from 'OFF' to 'ON' at 2013/02/14 10:59:34 02/14/2013 12:03 DGE_Robo BypassMode (BypassMode) changed from 'ON' to 'OFF' at 2013/02/14 10:59:33 02/14/2013 12:03 DGE_Robo BypassMarking (BypassMarking) changed from 'ON' to 'OFF' at 2013/02/14 10:59:31 02/14/2013 12:03 DGE_Robo BypassMode (BypassMode) changed from 'OFF' to 'ON' at 2013/02/14 10:59:31 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:59:19 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:59:14 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:58:51 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:58:46 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:58:15 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:58:10 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:58:06 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:58:02 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:57:54 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:57:51 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:57:32 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:57:29 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:57:20 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:57:15 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:57:04 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:57:01 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:56:49 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:56:44 02/14/2013 12:03 DGE_Robo SampleGateBypass (SBypass) changed from 'ON' to 'OFF' at 2013/02/14 10:56:43 02/14/2013 12:03 DGE_Robo BypassMarking (BypassMarking) changed from 'OFF' to 'ON' at 2013/02/14 10:46:53 02/14/2013 12:03 DGE_Robo BypassMode (BypassMode) changed from 'ON' to 'OFF' at 2013/02/14 10:46:53 02/14/2013 12:03 DGE_Robo SampleGateBypass (SBypass) changed from 'OFF' to 'ON' at 2013/02/14 10:38:19 02/14/2013 12:03 DGE_Robo SampleGateBypass (SBypass) changed from 'ON' to 'OFF' at 2013/02/14 10:38:13 02/14/2013 12:03 DGE_Robo SampleGateBypass (SBypass) changed from 'OFF' to 'ON' at 2013/02/14 10:36:44 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:36:37 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:36:33 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:36:26 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:36:22 02/14/2013 12:03 DGE_Robo SampleGateBypass (SBypass) changed from 'ON' to 'OFF' at 2013/02/14 10:36:10 02/14/2013 12:03 DGE_Robo SampleGateBypass (SBypass) changed from 'OFF' to 'ON' at 2013/02/14 10:35:46 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:35:36 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:35:31 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:35:28 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:35:25 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:35:02 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:34:57 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:34:46 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:34:42 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:34:37 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:34:34 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:34:27 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:34:20 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:33:41 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:33:29 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:33:04 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:32:33 02/14/2013 12:03 DGE_Robo SampleGateBypass (SBypass) changed from 'ON' to 'OFF' at 2013/02/14 10:32:30 02/14/2013 12:03 DGE_Robo SampleGateBypass (SBypass) changed from 'OFF' to 'ON' at 2013/02/14 10:30:58 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:30:50 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:30:43 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:30:39 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:30:34 02/14/2013 12:03 DGE_Robo SampleGateBypass (SBypass) changed from 'ON' to 'OFF' at 2013/02/14 10:30:34 02/14/2013 12:03 DGE_Robo SampleGateBypass (SBypass) changed from 'OFF' to 'ON' at 2013/02/14 10:29:49 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:29:25 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:29:18 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:29:13 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:29:08 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:28:52 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:28:50 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:28:39 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:28:35 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:28:30 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:28:23 02/14/2013 12:03 DGE_Robo SampleGateBypass (SBypass) changed from 'ON' to 'OFF' at 2013/02/14 10:28:22 02/14/2013 12:03 DGE_Robo SampleGateBypass (SBypass) changed from 'OFF' to 'ON' at 2013/02/14 10:27:24 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:27:10 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:27:03 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:26:45 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:26:43 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:26:40 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:26:37 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:26:28 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:26:26 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:26:23 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:26:17 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:26:07 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:26:02 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/02/14 10:25:59 02/14/2013 12:03 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/02/14 10:25:55 02/14/2013 12:03 DGE_Robo SampleGateBypass (SBypass) changed from 'ON' to 'OFF' at 2013/02/14 10:25:42 02/14/2013 12:03 DGE_Robo SampleGateBypass (SBypass) changed from 'OFF' to 'ON' at 2013/02/14 10:25:38 02/14/2013 12:03 DGE_Robo SampleGateBypass (SBypass) changed from 'ON' to 'OFF' at 2013/02/14 10:22:50 02/14/2013 12:03 DGE_Robo SampleGateBypass (SBypass) changed from 'OFF' to 'ON' at 2013/02/14 10:20:11 02/14/2013 12:03 DGE_Robo SampleGateBypass (SBypass) changed from 'ON' to 'OFF' at 2013/02/14 10:18:17 02/14/2013 09:02 DGE_Robo E_GateTrouble (E_Trouble) changed from 'OFF' to 'ON' at 2013/02/14 07:41:32 02/02/2013 06:39 troy@bay A1:ReaderReset,A2:InputSyncDetect,A2:InputSyncLost: Possible Random Reader Reset. 01/30/2013 15:03 DGE_Robo BypassMarking (BypassMarking) changed from 'ON' to 'OFF' at 2013/01/30 13:03:48 01/30/2013 15:03 DGE_Robo BypassMode (BypassMode) changed from 'OFF' to 'ON' at 2013/01/30 13:03:48 01/30/2013 15:03 DGE_Robo BypassMarking (BypassMarking) changed from 'OFF' to 'ON' at 2013/01/30 13:03:44 01/30/2013 15:03 DGE_Robo BypassMode (BypassMode) changed from 'ON' to 'OFF' at 2013/01/30 13:03:44 01/30/2013 15:03 DGE_Robo BypassMode (BypassMode) changed from 'OFF' to 'ON' at 2013/01/30 13:03:43 01/30/2013 15:03 DGE_Robo MarkingMode (MarkingMode) changed from 'ON' to 'OFF' at 2013/01/30 13:03:42 01/30/2013 15:03 DGE_Robo MarkingMode (MarkingMode) changed from 'OFF' to 'ON' at 2013/01/30 13:03:40 01/30/2013 15:03 DGE_Robo BypassMode (BypassMode) changed from 'ON' to 'OFF' at 2013/01/30 13:03:38 01/30/2013 15:03 DGE_Robo B_GateTrouble (B_Trouble) changed from 'ON' to 'OFF' at 2013/01/30 12:28:19 01/30/2013 15:03 DGE_Robo A_GateTrouble (A_Trouble) changed from 'ON' to 'OFF' at 2013/01/30 12:28:01 01/25/2013 00:05 DGE_Robo A_GateTrouble (A_Trouble) changed from 'OFF' to 'ON' at 2013/01/24 23:03:11 01/22/2013 18:02 DGE_Robo B_GateTrouble (B_Trouble) changed from 'OFF' to 'ON' at 2013/01/22 15:55:50 01/03/2013 13:13 Alan Site personnel report that the facility was shut down for the season at ~1000 12-20-2012. 01/02/2013 16:17 Troy The M4 version was uninstalled, and the appropriate folders deleted. M4 version 1.5.1.0 was then installed. 01/02/2013 00:00 PTOC_Bot Annual log file initiation for GRJ #### End of Event Log for GRJ ###