EVENT LOG FOR SITE JDJ The first line of each entry contains a date/time stamp & who is reporting. The most recent entry is listed first. Date Time Who ---------- ----- -------- 11/17/2013 08:26 rclark User: rclark. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: One time error. Noted.. Error: 03: Virtual Tag Test Failed. 11/15/2013 07:15 rclark User: rclark. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This was caused by an automatic update of the NIC driver.. Error: JDJ: The cluster connection to machine JDJ_M4-PC2 failed.. 11/10/2013 06:14 dchase User: dchase. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No direct cause for this one time failure.. Error: 93: Test Tag Failed. 11/08/2013 08:58 thumphre User: thumphrey. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 02: Virtual Tag Test Failed. 03: Virtual Tag Test Failed. 11/07/2013 07:29 dchase User: dchase. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No direct cause for these alarms, systems will be checked during the next site GMC.. Error: 02: Virtual Tag Test Failed. 03: Virtual Tag Test Failed. 11/06/2013 08:16 dchase User: dchase. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No direct cause for this one time alarm. Both alarms are related to the same incident.. Error: F1: Analog comm. F1: Exc. Power low. 11/06/2013 08:07 dchase User: dchase. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No direct cause for this alarm. It will be investigated during the next GMC.. Error: 03: Virtual Tag Test Failed. 11/06/2013 07:45 dchase User: dchase. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This alarm is being investigated and is believed to be caused by a site power outage.. Error: JDJ: The cluster connection to machine JDJ_M4-PC2 failed.. 11/03/2013 08:08 Alan User: Alan. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: One-time alarm. Error: 02: Virtual Tag Test Failed. 11/02/2013 07:04 Alan User: Alan. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: One-time alarm. Error: 02: Virtual Tag Test Failed. 11/01/2013 07:16 Alan User: Alan. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: One-time alarm. Error: 02: Noise Level High. 03: Noise Level High. 10/30/2013 09:05 rclark Performed site GMC on 10/30/2013. The FF transceivers were checked for tune and adjusted as needed. The battery in the remote sensor node was replaced. The utility PC was locked up and has errors with the file system. The PC is being brought back to the Kennewick office for repair. M4 PC1 and PC2 are within 1 second of atomic time. There are no other problems to report. 10/28/2013 07:49 Alan User: Alan. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 93: Overrun. 10/28/2013 07:49 Alan User: Alan. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be investigated during the next site visit.. Error: 02: Virtual Tag Test Failed. 03: Virtual Tag Test Failed. 10/24/2013 09:21 Alan Site personnel report short duration power outages this morning due to station switching. M4 momentarily lost it's cluster connection. Remotely logged in and verified functionality. 10/07/2013 06:51 thumphre User: thumphrey. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: One time occurance of this alarm, clearing TASS.. Error: 02: Noise Level High. 03: Noise Level High. 10/04/2013 07:45 Alan User: Alan. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: One-time alarm. Error: 93: Test Tag Failed. 10/02/2013 08:47 Alan User: Alan. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: one-time alarm. Error: 93: Test Tag Failed. 10/02/2013 08:46 Alan User: Alan. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: turning the light off. Error: 03: Virtual Tag Test Failed. 10/02/2013 08:45 Alan User: Alan. Site: JDJ. Antenna: 03. Comments: one-time alarm. Message: show errors 10/01/2013 12:16 scottl User: scottl. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: 02: Virtual Tag Test Failed. 03: Virtual Tag Test Failed. 04: Virtual Tag Test Failed. 09/28/2013 09:55 scottl User: scottl. Site: JDJ. Antenna Group Name: FULL FLOW BYPASS. Antenna: 03. Comments: noted. Error: 03: Virtual Tag Test Failed 09/28/2013 09:55 scottl User: scottl. Site: JDJ. Antenna Group Name: FULL FLOW BYPASS. Antenna: 02. Comments: noted. Error: 02: Virtual Tag Test Failed 09/25/2013 15:04 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/09/25 13:28:42 09/25/2013 15:04 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/09/25 13:28:42 09/25/2013 08:05 Alan The ISP changeover from DSL to GorgeNet radio was completed on 9-24-2013. The wiki IP pages have been updated. The new SonicWall configuration has been archived on the utility machine and catfish. 09/23/2013 07:19 Alan User: Alan. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: A noise event (that has since subsided) occurred during these alarms.. Error: 02: Virtual Tag Test Failed. 03: Virtual Tag Test Failed. 09/21/2013 06:15 rclark User: rclark. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: F1: Analog comm. F1: Exc. Power low. 09/20/2013 06:06 rclark User: rclark. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: F1: Analog comm. F1: Exc. Power low. 09/19/2013 10:48 rclark User: rclark. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: JDJ: Analog comm. JDJ: Exc. Power low. 09/18/2013 06:36 thumphre User: thumphrey. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: F1: Analog comm. F1: Exc. Power low. 09/16/2013 06:13 rclark User: rclark. Site: JDJ. Antenna Group Name: SBYC WEST TANK. Antenna: F1. Comments: Noted. Error: F1: Exc. Power low 09/16/2013 06:13 rclark User: rclark. Site: JDJ. Antenna Group Name: SBYC WEST TANK. Antenna: F1. Comments: Noted. Error: F1: Analog comm 09/16/2013 06:12 rclark User: rclark. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: JDJ: Analog comm. JDJ: Exc. Power low. 09/15/2013 07:52 thumphre User: thumphrey. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: F1: Analog comm. F1: Exc. Power low. 09/13/2013 06:54 thumphre User: thumphrey. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: JDJ: Analog comm. JDJ: Exc. Power low. JDJ: Virtual Tag Test Failed. JDJ: Test Tag Failed. JDJ: Overrun. 09/13/2013 06:39 thumphre User: thumphrey. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: F1: Analog comm. F1: Exc. Power low. A2: Analog comm. A2: Exc. Power low. 93: Test Tag Failed. 93: Overrun. 09/13/2013 06:31 Troy@bay 93:Overrun: Noted 09/12/2013 15:03 DGE_Robo DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/09/12 12:00:29 09/12/2013 15:03 DGE_Robo SampleGateBypass (SBypass) changed from 'OFF' to 'ON' at 2013/09/12 12:00:29 09/12/2013 09:03 DGE_Robo DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/09/12 06:00:28 09/12/2013 09:03 DGE_Robo SampleGateBypass (SBypass) changed from 'ON' to 'OFF' at 2013/09/12 06:00:28 09/12/2013 07:20 Troy@bay 93:TestTagFailure: Noted 09/11/2013 15:05 DGE_Robo SampleGateBypass (SBypass) changed from 'OFF' to 'ON' at 2013/09/09 12:00:31 09/11/2013 15:05 DGE_Robo DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/09/09 12:00:31 09/11/2013 15:05 DGE_Robo SampleGateBypass (SBypass) changed from 'ON' to 'OFF' at 2013/09/09 06:00:31 09/11/2013 15:05 DGE_Robo DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/09/09 06:00:31 09/11/2013 07:39 Don_Warf Visited the site yesterday, to verify that all data is being collected. Verified location of where the new Gorge Net antenna will be installed to replace the failed CenturyLink DSL. Manually retrieved M4 files from PC2 onto a thumb drive for upload at Kennewick. The Gorge Net system will be installed on Tuesday 9/17. Until then we will have the smolt monitoring crew help us verify that the 4 data collection PCs are up and running. 09/08/2013 07:46 dchase User: dchase. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Clearing TASS.. Error: F1: Analog comm. F1: Exc. Power low. 09/07/2013 08:25 dchase User: dchase. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Clearing TASS. Error: F1: Analog comm. F1: Exc. Power low. 09/07/2013 08:23 dchase User: dchase. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Clearing TASS. Error: 02: Noise Level High. 03: Noise Level High. 02: Virtual Tag Test Failed. 03: Virtual Tag Test Failed. 09/05/2013 18:04 DGE_Robo DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/09/05 12:00:33 09/05/2013 18:04 DGE_Robo SampleGateBypass (SBypass) changed from 'OFF' to 'ON' at 2013/09/05 12:00:33 09/05/2013 18:03 DGE_Robo DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/09/05 06:00:34 09/05/2013 18:03 DGE_Robo SampleGateBypass (SBypass) changed from 'ON' to 'OFF' at 2013/09/05 06:00:34 09/05/2013 06:55 thumphre User: thumphrey. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Clearing all System and PLC errors.. Error: JDJ: Excessive noise level. JDJ: Memory full. JDJ: Test Tag Failed. JDJ: The following transceiver data could not be processed: MESSÁGE: Single-shot test with Test Tag.. JDJ: Analog comm. JDJ: Exc. Power low. JDJ: Exc current low. JDJ: The following transceiver data could not be processed: ALM: Reader Set To Master. JDJ: The following transceiver data could not be processed: ALM: Sync. Input Not Present. JDJ: The following transceiver data could not be processed: MSG: Set Cap 13 Curr: 4.54A dPh: 36. JDJ: The following transceiver data could not be processed: MSG: Set Cap 14 Curr: 4.57A dPh: -3. JDJ: The following transceiver data could not be processed: MSG: Set Cap 14 Curr: 4.61A dPh: 2. JDJ: The following transceiver data could not be processed: MSG: Set Cap 14 Curr: 4.62A dPh: 8. JDJ: The following transceiver data could not be processed: MSG: Set Cap 15 Curr: 4.57A dPh: -31. JDJ: The following transceiver data could not be processed: MSG: Set Cap 15 Curr: 4.58A dPh: -25. JDJ: The following transceiver data could not be processed: MSG: Unknown Command DTS (? for help) . JDJ: Reader Set To Master. JDJ: Sync. Input Not Present. JDJ: The following transceiver data could not be processed: Average: 4 %. JDJ: The following transceiver data could not be processed: FDXB Peak: 100 %. JDJ: The following transceiver data could not be processed: MESSAGE: Reader is in standby mode.. JDJ: The following transceiver data could not be processed: Noise report for Reader ID#01. JDJ: The following transceiver data could not be processed: Peak: 100 %. JDJ: The following transceiver data could not be processed: PROBLEM: Excessive noise level. JDJ: Warning: the difference in system time between the two M4 cluster machines is 113.91 seconds.. JDJ: Noise Level High. JDJ: Virtual Tag Test Failed. JDJ: Tuning Capacitance Low. JDJ: Tuning Out Of Range. JDJ: Antenna Current Low. JDJ: Tuning Capacitance High. JDJ: The following transceiver data could not be processed: Pråambles: 1781 Bad CRC: 6. JDJ: The cluster connection to machine JDJ_M4-PC2 failed.. JDJ: 51 transceiver has not responded in 65 minute(s).. JDJ: 52 transceiver has not responded in 65 minute(s).. JDJ: 53 transceiver has not responded in 65 minute(s).. JDJ: 54 transceiver has not responded in 65 minute(s).. JDJ: 61 transceiver has not responded in 65 minute(s).. JDJ: 62 transceiver has not responded in 65 minute(s).. JDJ: 81 transceiver has not responded in 65 minute(s).. JDJ: 82 transceiver has not responded in 65 minute(s).. JDJ: 83 transceiver has not responded in 65 minute(s).. JDJ: 84 transceiver has not responded in 65 minute(s).. JDJ: 91 transceiver has not responded in 65 minute(s).. JDJ: 92 transceiver has not responded in 65 minute(s).. JDJ: 93 transceiver has not responded in 65 minute(s).. JDJ: 94 transceiver has not responded in 65 minute(s).. JDJ: A1 transceiver has not responded in 65 minute(s).. JDJ: A2 transceiver has not responded in 65 minute(s).. JDJ: A3 transceiver has not responded in 65 minute(s).. JDJ: A4 transceiver has not responded in 65 minute(s).. JDJ: C1 transceiver has not responded in 65 minute(s).. JDJ: C2 transceiver has not responded in 65 minute(s).. JDJ: C3 transceiver has not responded in 65 minute(s).. JDJ: C4 transceiver has not responded in 65 minute(s).. JDJ: E1 transceiver has not responded in 65 minute(s).. JDJ: E2 transceiver has not responded in 65 minute(s).. JDJ: F1 transceiver has not responded in 65 minute(s).. JDJ: F2 transceiver has not responded in 65 minute(s).. 09/03/2013 06:51 dchase User: dchase. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Clearing TASS.. Error: F1: Analog comm. F1: Exc. Power low. 09/03/2013 06:34 darren@b 51:ReaderReset,52:InputSyncDetect,52:ReaderReset,53:InputSyncDetect,53:Rea derReset,54:InputSyncDetect,54:ReaderReset,61:ReaderReset,62:InputSyncDete ct,62:ReaderReset,81:ReaderReset,82:InputSyncDetect,82:ReaderReset,83:Inpu tSyncDetect,83:ReaderReset,84:InputSyncDetect,84:ReaderReset,91:ReaderRese t,92:InputSyncDetect,92:ReaderReset,93:InputSyncDetect,93:ReaderReset,94:I nputSyncDetect,94:ReaderReset,A1:ReaderReset,A2:InputSyncDetect,A2:ReaderR eset,A3:InputSyncDetect,A3:ReaderReset,A4:InputSyncDetect,A4:ReaderReset,C 1:ReaderReset,C2:InputSyncDetect,C2:ReaderReset,C3:InputSyncDetect,C3:Read erReset,C4:InputSyncDetect,C4:ReaderReset,E1:ReaderReset,E2:InputSyncDetec t,E2:ReaderReset,F1:ReaderReset,F2:InputSyncDetect,F2:ReaderReset: These alarms will be investigated during the next site visit. 09/03/2013 06:03 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/09/03 03:55:22 09/03/2013 06:03 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/09/03 03:47:38 09/02/2013 15:03 DGE_Robo DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/09/02 12:00:36 09/02/2013 15:03 DGE_Robo SampleGateBypass (SBypass) changed from 'OFF' to 'ON' at 2013/09/02 12:00:36 09/02/2013 09:03 DGE_Robo DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/09/02 06:00:36 09/02/2013 09:03 DGE_Robo SampleGateBypass (SBypass) changed from 'ON' to 'OFF' at 2013/09/02 06:00:36 09/02/2013 08:03 rclark User: rclark. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: F1: Analog comm. F1: Exc. Power low. A2: Analog comm. A2: Exc. Power low. 09/01/2013 07:06 rclark User: rclark. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: F1: Analog comm. F1: Exc. Power low. 08/31/2013 06:48 rclark User: rclark. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: F1: Analog comm. F1: Exc. Power low. 08/31/2013 06:47 rclark User: rclark. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 02: Noise Level High. 08/29/2013 15:03 DGE_Robo DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/08/29 12:00:39 08/29/2013 15:03 DGE_Robo SampleGateBypass (SBypass) changed from 'OFF' to 'ON' at 2013/08/29 12:00:39 08/29/2013 09:03 DGE_Robo DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/08/29 06:00:39 08/29/2013 09:03 DGE_Robo SampleGateBypass (SBypass) changed from 'ON' to 'OFF' at 2013/08/29 06:00:39 08/29/2013 06:14 rclark User: rclark. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: F1: Analog comm. F1: Exc. Power low. 08/28/2013 06:12 rclark User: rclark. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: F1: Analog comm. F1: Exc. Power low. 08/27/2013 12:48 rclark Performed site GMC on 8/27/2013. All transceivers were checked for tune and adjusted as needed. Multimon PC1 is 48 seconds and PC2 was 76 seconds behind atomic time. Adjusted PC2 to within 1 second of PC1. Archived files on PC2. There are no problems to report. 08/27/2013 06:08 rclark User: rclark. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted.. Error: F1: Analog comm. F1: Exc. Power low. 08/26/2013 15:03 DGE_Robo DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/08/26 12:00:42 08/26/2013 15:03 DGE_Robo SampleGateBypass (SBypass) changed from 'OFF' to 'ON' at 2013/08/26 12:00:42 08/26/2013 09:03 DGE_Robo DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/08/26 06:00:41 08/26/2013 09:03 DGE_Robo SampleGateBypass (SBypass) changed from 'ON' to 'OFF' at 2013/08/26 06:00:41 08/26/2013 06:15 rclark User: rclark. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: F1: Analog comm. F1: Exc. Power low. 08/26/2013 06:13 rclark User: rclark. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Unknown cause for theses one time errors. This will be checked during the next site visit.. Error: 03: Virtual Tag Test Failed. 02: Virtual Tag Test Failed. 08/25/2013 09:12 Alan User: Alan. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: F1: Analog comm. F1: Exc. Power low. 08/24/2013 09:23 Alan User: Alan. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: F1: Analog comm. F1: Exc. Power low. 08/24/2013 00:06 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at 2013/08/23 22:02:03 08/22/2013 15:03 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at 2013/08/22 12:53:06 08/22/2013 15:03 DGE_Robo DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/08/22 12:00:44 08/22/2013 15:03 DGE_Robo SampleGateBypass (SBypass) changed from 'OFF' to 'ON' at 2013/08/22 12:00:44 08/22/2013 09:03 DGE_Robo DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/08/22 06:00:44 08/22/2013 09:03 DGE_Robo SampleGateBypass (SBypass) changed from 'ON' to 'OFF' at 2013/08/22 06:00:44 08/22/2013 07:42 Alan User: Alan. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: F1: Analog comm. F1: Exc. Power low. 08/22/2013 06:03 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at 2013/08/22 05:38:17 08/21/2013 07:00 Alan User: Alan. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: F1: Analog comm. F1: Exc. Power low. 08/20/2013 06:49 Alan User: Alan. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: F1: Analog comm. F1: Exc. Power low. 08/19/2013 15:03 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at 2013/08/19 12:56:19 08/19/2013 15:03 DGE_Robo SampleGateBypass (SBypass) changed from 'OFF' to 'ON' at 2013/08/19 12:00:46 08/19/2013 09:16 alan@bay 52:InputSyncDetect,52:ReaderReset: Cleared on new TASS 08/19/2013 09:15 Alan User: Alan. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: F1: Analog comm. F1: Exc. Power low. 08/19/2013 09:03 DGE_Robo DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/08/19 07:30:46 08/19/2013 09:03 DGE_Robo DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/08/19 06:00:46 08/19/2013 09:03 DGE_Robo SampleGateBypass (SBypass) changed from 'ON' to 'OFF' at 2013/08/19 06:00:46 08/19/2013 06:03 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at 2013/08/19 05:40:49 08/15/2013 15:03 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at 2013/08/15 12:47:35 08/15/2013 15:03 DGE_Robo DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/08/15 12:00:49 08/15/2013 15:03 DGE_Robo SampleGateBypass (SBypass) changed from 'OFF' to 'ON' at 2013/08/15 12:00:49 08/15/2013 12:03 DGE_Robo DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/08/15 09:00:49 08/15/2013 09:03 DGE_Robo SampleGateBypass (SBypass) changed from 'ON' to 'OFF' at 2013/08/15 06:00:49 08/15/2013 06:04 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at 2013/08/15 05:35:39 08/12/2013 15:03 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at 2013/08/12 12:33:45 08/12/2013 15:03 DGE_Robo SampleGateBypass (SBypass) changed from 'OFF' to 'ON' at 2013/08/12 12:00:52 08/12/2013 09:04 DGE_Robo DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/08/12 06:00:51 08/12/2013 09:04 DGE_Robo DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/08/12 06:00:51 08/12/2013 09:04 DGE_Robo SampleGateBypass (SBypass) changed from 'ON' to 'OFF' at 2013/08/12 06:00:51 08/12/2013 06:04 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at 2013/08/12 05:39:50 08/11/2013 07:33 dchase User: dchase. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Alarms will be investigated during the next site visit.. Error: 02: Noise Level High. 03: Noise Level High. 08/10/2013 07:36 dchase User: dchase. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Clearing TASS.. Error: F1: Analog comm. F1: Exc. Power low. 08/08/2013 15:03 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at 2013/08/08 12:55:30 08/08/2013 15:03 DGE_Robo DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/08/08 12:03:11 08/08/2013 15:03 DGE_Robo SampleGateBypass (SBypass) changed from 'OFF' to 'ON' at 2013/08/08 12:03:11 08/08/2013 10:13 dlwarf User: dlwarf. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Clearing New TASS on minor alarms.. Error: F1: Analog comm. F1: Exc. Power low. 08/08/2013 09:04 DGE_Robo DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/08/08 08:00:54 08/08/2013 09:03 DGE_Robo DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/08/08 06:00:54 08/08/2013 09:03 DGE_Robo DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/08/08 06:00:54 08/08/2013 09:03 DGE_Robo SampleGateBypass (SBypass) changed from 'ON' to 'OFF' at 2013/08/08 06:00:54 08/08/2013 06:03 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at 2013/08/08 05:39:47 08/07/2013 09:20 Alan User: Alan. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: F1: Analog comm. F1: Exc. Power low. 93: Test Tag Failed. 08/07/2013 06:18 darren@b 93:TestTagFailure: No direct cause for this alarm, timer tag fired on its next schedule interval. 08/05/2013 15:03 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at 2013/08/05 12:03:41 08/05/2013 15:03 DGE_Robo DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/08/05 12:00:56 08/05/2013 15:03 DGE_Robo SampleGateBypass (SBypass) changed from 'OFF' to 'ON' at 2013/08/05 12:00:56 08/05/2013 12:04 DGE_Robo DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/08/05 10:00:56 08/05/2013 09:03 DGE_Robo SampleGateBypass (SBypass) changed from 'ON' to 'OFF' at 2013/08/05 06:00:56 08/05/2013 06:03 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at 2013/08/05 05:37:32 08/05/2013 06:03 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at 2013/08/05 05:36:33 08/05/2013 06:03 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at 2013/08/05 05:34:48 08/04/2013 08:12 thumphre User: thumphrey. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Alarm not of concern at this time,it will be investigated on the next site visit. Error: F1: Analog comm. F1: Exc. Power low. 08/03/2013 07:58 thumphre User: thumphrey. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: These alarms will be addressed on the next site visit.. Error: F1: Analog comm. F1: Exc. Power low. 08/02/2013 07:47 thumphre User: thumphrey. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: F1: Analog comm. F1: Exc. Power low. 08/02/2013 07:46 thumphre User: thumphrey. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: These alarms wll be investigated on the next GMC.. Error: 01: Virtual Tag Test Failed. 02: Reader Set To Master. 03: Reader Set To Master. 04: Reader Set To Master. 02: Sync. Input Not Present. 03: Sync. Input Not Present. 04: Sync. Input Not Present. 08/01/2013 15:03 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at 2013/08/01 12:34:43 08/01/2013 15:03 DGE_Robo SampleGateBypass (SBypass) changed from 'OFF' to 'ON' at 2013/08/01 12:01:00 08/01/2013 09:03 DGE_Robo SampleGateBypass (SBypass) changed from 'ON' to 'OFF' at 2013/08/01 06:00:59 08/01/2013 06:03 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at 2013/08/01 05:43:36 07/31/2013 09:32 rclark On site 7/31/2013 to investigate loss of detection on transceiver 01. The transceiver would indicate a FDXB signal. However, it would not detect tags or the VTT. Tried adjustments, resetting the transceiver, and defaulting the parameters without success. Replaced the transceiver and it works properly now. 07/31/2013 06:24 thumphre User: thumphrey. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: F1: Analog comm. F1: Exc. Power low. 07/31/2013 06:23 thumphre User: thumphrey. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be investigated. It appears the transceiver may have failed or the UPS suppling power to it... Error: 01: Virtual Tag Test Failed. 07/30/2013 07:22 thumphre User: thumphrey. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: F1: Analog comm. F1: Exc. Power low. 07/29/2013 15:03 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at 2013/07/29 12:37:34 07/29/2013 15:03 DGE_Robo SampleGateBypass (SBypass) changed from 'OFF' to 'ON' at 2013/07/29 12:01:02 07/29/2013 09:04 DGE_Robo SampleGateBypass (SBypass) changed from 'ON' to 'OFF' at 2013/07/29 06:01:01 07/29/2013 06:03 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at 2013/07/29 05:43:26 07/25/2013 15:03 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at 2013/07/25 12:05:28 07/25/2013 15:03 DGE_Robo SampleGateBypass (SBypass) changed from 'OFF' to 'ON' at 2013/07/25 12:01:07 07/24/2013 09:22 rclark Performed site GMC on 7/24/2013. All transceivers were checked for tune and adjusted as needed. 10 sticks were thrown at the separator. All sticks were read on all coils and diverted properly. Multimon PC1 was 38 seconds and PC2 was 59 seconds behind atomic time. Adjusted clocks to within 1 second of atomic time. JDJ13205.207 was submitted as a gap file. Files on PC2 were archived. There are no problems to report. 07/19/2013 06:18 scottl User: scottl. Site: JDJ. Antenna Group Name: SBYC WEST TANK. Antenna: F1. Comments: No comments. Error: F1: Exc. Power low 07/19/2013 06:18 scottl User: scottl. Site: JDJ. Antenna Group Name: SBYC WEST TANK. Antenna: F1. Comments: No comments. Error: F1: Analog comm 07/18/2013 06:14 scottl User: scottl. Site: JDJ. Antenna Group Name: SBYC WEST TANK. Antenna: F1. Comments: Will monitor. Error: F1: Exc. Power low 07/18/2013 06:14 scottl User: scottl. Site: JDJ. Antenna Group Name: SBYC WEST TANK. Antenna: F1. Comments: Will monitor. Error: F1: Analog comm 07/18/2013 06:13 scottl User: scottl. Site: JDJ. Antenna Group Name: FULL FLOW BYPASS. Antenna: 01. Comments: Issue was corrected on 7/17 during site visit.. Error: 01: Noise Level High 07/18/2013 06:13 scottl User: scottl. Site: JDJ. Antenna Group Name: FULL FLOW BYPASS. Antenna: 01. Comments: Issue was corrected on 7/17 during site visit.. Error: 01: Tuning Out Of Range 07/18/2013 06:13 scottl User: scottl. Site: JDJ. Antenna Group Name: FULL FLOW BYPASS. Antenna: 01. Comments: Issue was corrected on 7/17 during site visit.. Error: 01: Tuning Capacitance High 07/18/2013 05:56 rclark User: rclark. Site: JDJ. Antenna: 01. Comments: Caused by PSMFC personnel during site visit.. Message: show errors 07/17/2013 11:20 rclark On site 7/17/2013 to investigate occasional tuning cap high alarms. The tuning cap value was at 62, which is close to the upper range of values. The antenna wires were repostioned to add a small amount of inductance. This lowered the tuning cap value to 52. This should give better auto- tuning range and eliminate the alarms. The remaining full flow antennas were checked for tuning. There are no problems to report. 07/17/2013 06:21 scottl User: scottl. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Issue will be investigated. Error: 01: Tuning Capacitance High. 01: Tuning Out Of Range. 07/16/2013 06:15 scottl User: scottl. Site: JDJ. Antenna Group Name: . Antenna: No errors were removed. Comments: Will monitor. Error: 07/15/2013 06:22 scottl User: scottl. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: F1: Analog comm. F1: Exc. Power low. 07/15/2013 06:21 scottl User: scottl. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Will look into the tuning issues for this unit. Error: 01: Tuning Capacitance High. 01: Tuning Out Of Range. 07/14/2013 07:46 Alan User: Alan. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: F1: Analog comm. F1: Exc. Power low. 07/13/2013 07:18 alan@bay F1:ReaderReset,F2:InputSyncDetect,F2:InputSyncLost: Cleared on new TASS. 07/13/2013 07:15 Alan User: Alan. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: F1: Analog comm. F1: Exc. Power low. 07/12/2013 09:58 rclark Performed site GMC on 7/12/2013. All transceivers were checked for tune. The full flow transceivers were fully tuned utilizing the timer tag efficiency test. 10 sticks were thrown at the separator gate. All sticks were read on all coils and diverted properly. Multimon PC1 is 22 seconds and PC2 was 50 seconds behind atomic time. Adjusted PC2 to within 1 second of PC1. Files on PC2 were archived. There are no problems to report. 07/12/2013 09:20 Alan User: Alan. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: F1: Analog comm. F1: Exc. Power low. 07/11/2013 07:20 Alan User: Alan. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: F1: Analog comm. F1: Exc. Power low. 07/10/2013 10:03 Alan User: Alan. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: F1: Analog comm. F1: Exc. Power low. 07/09/2013 08:08 Alan User: Alan. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be investigated during the next site visit.. Error: F1: Analog comm. F1: Exc. Power low. 07/08/2013 08:10 Alan User: Alan. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be addressed during the next site visit.. Error: F1: Analog comm. F1: Exc. Power low. 07/07/2013 13:22 rclark@b SLC500:CommsFailure: Noted. 07/07/2013 06:24 rclark User: rclark. Site: JDJ. Antenna Group Name: SBYC WEST TANK. Antenna: F1. Comments: This will be addressed during the next site visit.. Error: F1: Exc. Power low 07/07/2013 06:24 rclark User: rclark. Site: JDJ. Antenna Group Name: SBYC WEST TANK. Antenna: F1. Comments: This will be addressed during the next site visit.. Error: F1: Analog comm 07/06/2013 06:53 rclark User: rclark. Site: JDJ. Antenna Group Name: SBYC WEST TANK. Antenna: F1. Comments: This will be addressed during the next site visit.. Error: F1: Exc. Power low 07/06/2013 06:53 rclark User: rclark. Site: JDJ. Antenna Group Name: SBYC WEST TANK. Antenna: F1. Comments: This will be addressed during the next site visit.. Error: F1: Analog comm 07/05/2013 06:36 rclark User: rclark. Site: JDJ. Antenna Group Name: SBYC WEST TANK. Antenna: F1. Comments: This will be checked during the next site visit.. Error: F1: Exc. Power low 07/05/2013 06:36 rclark User: rclark. Site: JDJ. Antenna Group Name: SBYC WEST TANK. Antenna: F1. Comments: This will be checked during the next site visit.. Error: F1: Analog comm 07/04/2013 06:24 rclark User: rclark. Site: JDJ. Antenna Group Name: SBYC WEST TANK. Antenna: F1. Comments: This will be checked during the next site visit. Error: F1: Exc. Power low 07/04/2013 06:24 rclark User: rclark. Site: JDJ. Antenna Group Name: SBYC WEST TANK. Antenna: F1. Comments: This will be checked during the next site visit. Error: F1: Analog comm 07/03/2013 07:52 rclark@b SLC500:CommsFailure: Noted 07/03/2013 06:06 rclark User: rclark. Site: JDJ. Antenna Group Name: SBYC WEST TANK. Antenna: F1. Comments: This will be addressed during the next site visit. Error: F1: Exc. Power low 07/03/2013 06:06 rclark User: rclark. Site: JDJ. Antenna Group Name: SBYC WEST TANK. Antenna: F1. Comments: This will be addressed during the next site visit. Error: F1: Analog comm 07/02/2013 06:15 rclark User: rclark. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: F1: Analog comm. F1: Exc. Power low. 07/02/2013 06:14 rclark User: rclark. Site: JDJ. Antenna Group Name: . Antenna: No errors were removed. Comments: This will be addressed during the next site visit.. Error: 07/01/2013 06:15 rclark User: rclark. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be addressed during the next site visit.. Error: F1: Analog comm. F1: Exc. Power low. 06/30/2013 07:20 Alan User: Alan. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be investigated during the next site visit.. Error: F1: Analog comm. F1: Exc. Power low. 06/29/2013 06:13 Alan User: Alan. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: F1: Analog comm. F1: Exc. Power low. 06/29/2013 06:12 Alan User: Alan. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: These will be investigated during the next site visit. These transceivers are reading PIT tags with high efficiency.. Error: 03: Reader Set To Master. 04: Reader Set To Master. 03: Sync. Input Not Present. 04: Sync. Input Not Present. 02: Reader Set To Master. 02: Sync. Input Not Present. 06/27/2013 07:21 thumphre User: thumphrey. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Alarms due to maintenance activities.. Error: 04: Reader Set To Master. 04: Sync. Input Not Present. 03: Reader Set To Master. 03: Sync. Input Not Present. 02: Noise Level High. 03: Noise Level High. 04: Noise Level High. 06/27/2013 07:20 Troy@bay 91:ReaderReset,92:InputSyncDetect,92:InputSyncLost,93:TestTagFailure,94:In putSyncDetect,94:InputSyncLost,C1:ReaderReset,C2:InputSyncDetect,C2:InputS yncLost,C4:InputSyncDetect,C4:InputSyncLost: Noted. 06/26/2013 09:04 rclark Performed site GMC on 6/26/2013. All transceivers were checked for tune and adjusted as needed. 10 sticks were thrown. C1 read 8 of 10 and C2 read 9 of 10 sticks. All other transceivers read 10 of 10. All sticks were diverted properly. Multimon PC1 was 55 seconds and PC2 was 89 seconds behind atomic time. Set clocks to within 1 second of atomic time. JDK13177.206 was submitted as a patch file. Files on PC2 were archived. There are no problems to report. 06/25/2013 09:13 Alan User: Alan. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: These alarms were generated by PTAGIS Field Operations personnel during a site visit.. Error: 02: Reader Set To Master. 03: Reader Set To Master. 04: Reader Set To Master. 02: Sync. Input Not Present. 03: Sync. Input Not Present. 04: Sync. Input Not Present. 04: Tuning Capacitance Low. 04: Tuning Out Of Range. 01: Virtual Tag Test Failed. 03: Antenna Current Low. 03: Noise Level High. 06/24/2013 10:20 dlwarf User: dlwarf. Site: JDJ. Antenna Group Name: FULL FLOW BYPASS. Antenna: 01. Comments: To be addressed today.. Error: 01: Virtual Tag Test Failed. 06/24/2013 07:40 Alan User: Alan. Site: JDJ. Antenna Group Name: SAMPLE / SBYC EXIT. Antenna: 93. Comments: Noted. Error: 93: Test Tag Failed 06/24/2013 07:26 Alan User: Alan. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be investigated today during a site visit.. Error: 01: Virtual Tag Test Failed. 06/23/2013 08:12 thumphre User: thumphrey. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: F1: Analog comm. F1: Exc. Power low. 06/23/2013 08:11 thumphre User: thumphrey. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be addressed this week.. Error: 01: Virtual Tag Test Failed. 06/22/2013 06:29 thumphre User: thumphrey. Site: JDJ. Antenna Group Name: FULL FLOW BYPASS. Antenna: 01. Comments: Noted. Error: 01: Virtual Tag Test Failed 06/21/2013 19:48 thumphre User: thumphrey. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 93: Test Tag Failed. 06/21/2013 19:47 thumphre User: thumphrey. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 01: Virtual Tag Test Failed. 06/21/2013 18:13 troy@bay 93:TestTagFailure: Noted 06/21/2013 07:51 dlwarf User: dlwarf. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Alarms due to upgrades to FS2020 transceivers.. Error: 01: Analog comm. 04: Exc current low. 02: Test Tag Failed. 02: Reader Set To Master. 03: Reader Set To Master. 04: Reader Set To Master. 02: Sync. Input Not Present. 03: Sync. Input Not Present. 04: Sync. Input Not Present. 03: Noise Level High. 04: Noise Level High. 01: Virtual Tag Test Failed. 06/20/2013 12:49 scottl Replaced all 4 transcievers with 2020 units. Installed a temporary sync cable between 02 and 03. Conduit for this cable will be installed next week. Changed site config on M4 pc1 and 2 to reflect the 2020 transwceiver change. Sec. PC change occured at 11:02:33 and Pri. PC occurred at 11:07:05. Site Config files were sent to Nicole for archiving. 06/20/2013 06:30 Troy@bay 01:ReaderReset,02:InputSyncDetect,02:InputSyncLost,02:ReaderReset,02:TestT agFailure,03:ReaderReset,04:InputSyncDetect,04:InputSyncLost,04:LowExcCurr ent,04:ReaderReset,04:RocketPortNoEOT: Caused by PSMFC personnel. 06/19/2013 06:55 thumphre User: thumphrey. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: F1: Analog comm. F1: Exc. Power low. 06/16/2013 08:27 dchase User: dchase. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Clearing TASS. Error: F1: Analog comm. F1: Exc. Power low. 06/14/2013 06:41 darren@b 04:ReaderReset: Alarm caused by PSMFC personnel while on site. 06/12/2013 09:23 rclark Performed site GMC on 6/12/2013. All transceivers were checked for tune and adjusted as needed. 10 sticks were thrown at the separator gate. All sticks were read on all coils and diverted properly. Multimon PC1 is 35 seconds and PC2 was 62 seconds behind atomic time. Adjusted PC2 to within 1 second of PC1. Archived files on PC2. There are no problems to report. 06/09/2013 07:20 rclark User: rclark. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted.. Error: F1: Analog comm. F1: Exc. Power low. 06/08/2013 10:37 rclark On site 6/8/2013 to retune full flow transceivers due to poor efficiencies and missed timer tags. All the full flow transceivers were retuned. There are no other problems to report. 06/08/2013 07:34 rclark User: rclark. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted.. Error: F1: Analog comm. F1: Exc. Power low. 06/07/2013 07:07 scottl User: scottl. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: F1: Analog comm. F1: Exc. Power low. 06/06/2013 06:21 scottl@b SLC500:CommsFailure: Noted 06/05/2013 06:08 scottl User: scottl. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: F1: Analog comm. F1: Exc. Power low. 06/04/2013 10:36 rclark Performed site GMC on 6/4/2013. All transceivers were checked for tune and adjusted as needed. Threw 10 sticks at the separator. All sticks were read on all coils and diverted properly. Multimon PC1 is 24 seconds and PC2 is 36 seconds behind atomic time. Files on PC2 were archived. There are no problems to report. 06/04/2013 06:08 rclark User: rclark. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be checked during the next site visit.. Error: F1: Analog comm. F1: Exc. Power low. 06/03/2013 06:15 scottl@b 54:InputSyncDetect,54:ReaderReset: Noted 06/02/2013 10:09 alan@bay 61:ReaderReset,62:InputSyncDetect,62:InputSyncLost,A4:TestTagFailure: Cleared on New TASS 06/01/2013 07:14 Alan User: Alan. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: A tag was in the field when the TT was fired. Error: A4: Test Tag Failed. 05/28/2013 11:37 alan@bay 01:TestTagFailure: Cleared on new TASS 05/28/2013 11:30 Alan User: Alan. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This was addressed today during a GMC. Error: 01: Test Tag Failed. 05/28/2013 09:37 Roger Performed site GMC on 5/28/2013. All transceivers were checked for tune and adjusted as needed. 11 sticks were thrown at the separator gate. All sticks were read on all coils and diverted properly. Multimon PC1 is 16 seconds and PC2 was 36 seconds behind atomic time. Adjusted PC2 within 1 second of PC1. Archived files on PC2. There are no problems to report. 05/27/2013 08:29 thumphre User: thumphrey. Site: JDJ. Antenna Group Name: FULL FLOW BYPASS. Antenna: 01. Comments: This will be addressed on the next site visit.. Error: 01: Test Tag Failed 05/27/2013 08:11 Troy@bay 01:TestTagFailure: Will be addressed on next GMC. 05/26/2013 08:19 Troy@bay 01:TestTagFailure,SLC500:CommsFailure: SLC500 CommsFailure not of concern as M4 has control of the gates. 01 will be addressed on the next site visit. 05/26/2013 08:17 thumphre User: thumphrey. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be addressed on the next site visit.. Error: 01: Test Tag Failed. 05/25/2013 07:31 thumphre Transceiver 01 on the FF is reading at a low efficiency. The other 3 transceivers are reading well so PSMFC will not respond to this issue at the moment but will monitor. The issue will be addressed on the next GMC. 05/22/2013 08:48 Roger Performed site GMC on 5/22/2013. All transceivers were checked for tune and adjusted as needed. 10 sticks were thrown at the separator gate. All sticks were read on all coils, except C2, which read 8 of 10. All sticks were diverted properly. Multimon PC1 is 6 seconds and PC2 is 16 seconds behind atomic time. Files on PC2 were archived. There are no problems to report. 05/21/2013 07:21 Troy@bay F2:InputSyncDetect,F2:ReaderReset,SLC500:CommsFailure: M4 has control of the gates so the SLC Comm's failures are not of concern at this time. Possible Random Reader reset. 05/17/2013 09:55 Alan File JDJ13137.903 was created from JDJ13137.203 and submitted to fill the gap from this morning's platform maintenance. The PC clocks (PC1 +00:00:55, PC2 -00:00:35 were then adjusted to within one second of atomic time. File JDJ13137.206 is the gap file for the period while PC1's clock was being adjusted. No further problems to report. 05/17/2013 08:04 Darren I PCA'd into the site and found that the uploader was in a yellow state and was not sending the files. I closed out the uploader and when I went to restart it i received the message the it was already running. I had to remotely reboot the PC, unfortuantely I did not have two sessions going to create a gap file for Multimon. I did open a new file prior to reboot so file JDJ13137.104 is the file during the reboot. 05/15/2013 13:54 rclark@b 03:ReaderReset: Caused by PSMFC personnel during site visit. 05/15/2013 09:44 Roger Performed site GMC on 5/15/2013. All transceivers were checked for tune and adjusted as needed. Threw 10 sticks at the separator gate. All sticks were read on all coils and diverted properly. Multimon PC1 is 28 seconds and PC2 was 40 seconds behind atomic time. Adjusted the clock on PC2 to within 1 second of PC1. Files on PC2 were archived. There are no problems to report. 05/15/2013 06:47 rclark@b 03:TestTagFailure: Cleared on new TASS. 05/15/2013 06:35 rclark User: rclark. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This alarm will be addressed during today's site visit.. Error: 03: Test Tag Failed. 05/13/2013 06:30 rclark User: rclark. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be checked during the next site visit.. Error: F1: Analog comm. F1: Exc. Power low. 05/09/2013 06:26 scottl@b SLC500:CommsFailure: Noted 05/08/2013 09:30 Roger Performed site GMC on 5/8/2013. All transceivers were checked for tune and adjusted as needed. 10 sticks were thrown at the separator. All sticks were read on all coils and diverted properly. Multimon PC1 is 18 seconds and PC2 was 41 seconds behind atomic time. Adjusted PC2 clock to within 1 second of PC1. Files on PC2 were archived. There are no problems to report. 05/08/2013 07:09 scottl User: scottl. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: 05/08/2013 07:09 scottl User: scottl. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: F1: Analog comm. F1: Exc. Power low. 05/07/2013 06:51 Alan Century tel reports a 20 state outage that is affecting Bonneville, John Day and Prosser. Their service rep says they have no estimated time of return to service- 05/03/2013 06:15 darren@b SLC500:CommsFailure: The PITtag in question was diverted properly. 05/02/2013 06:59 darren@b SLC500:CommsFailure: The PITtag in question was diverted properly. 05/01/2013 09:49 Roger Performed site GMC on 5/1/2013. All transceivers were checked for tune and adjusted as needed. 10 sticks were thrown. All stick were read on all coils and diverted properly. PC1 is 10 seconds and PC2 is 22 seconds behind atomic time. There are no problems to report. 05/01/2013 06:27 darren@b SLC500:CommsFailure: PITtags in question were diverted properly. 05/01/2013 06:16 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/05/01 05:52:12 05/01/2013 06:16 DGE_Robo DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/05/01 05:52:12 05/01/2013 06:16 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/05/01 05:52:04 05/01/2013 06:16 DGE_Robo DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/05/01 05:52:04 05/01/2013 06:16 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/05/01 05:51:48 05/01/2013 06:16 DGE_Robo DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/05/01 05:51:48 05/01/2013 06:16 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/05/01 05:51:46 05/01/2013 06:16 DGE_Robo DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/05/01 05:51:46 04/30/2013 06:12 DGE_Robo Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/04/30 05:56:43 04/30/2013 06:12 DGE_Robo DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/04/30 05:56:43 04/30/2013 06:12 DGE_Robo Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/04/30 05:56:37 04/30/2013 06:12 DGE_Robo DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/04/30 05:56:37 04/24/2013 09:35 Roger Performed site GMC on 4/24/2013. All transceivers were checked for tune and adjusted as needed. 10 sticks were thrown at the separator gate. All sticks were read on all coils and diverted properly. PC1 was 34 seconds and PC2 was 60 second behind atomic time. Adjusted clocks to within 1 second of atomic time. JDJ13114.207 and .209 were submitted as gap files. Files on PC2 were archived. There are no problems to report. 04/23/2013 08:59 Troy@bay SLC500:CommsFailure: Not of concern at this time as M4 has control of the gates. 04/22/2013 06:28 Troy@bay SLC500:CommsFailure: M4 is in control of the diversion. This alarm has no effect on fish disposition. 04/21/2013 07:49 alan@bay SLC500:CommsFailure: SLC500:CommsFailure: Alarm not uncoomon PIT tag was diverted properly. 04/21/2013 07:49 alan@bay SLC500:CommsFailure: Alarm not uncoomon PIT tag was diverted properly. 04/17/2013 09:28 Roger Performed site GMC on 4/17/2013. All transceivers were checked for tune and adjusted as needed. 10 sticks were thrown at the separator. All sticks were read on all coils and diverted properly. PC1 is 25 seconds and PC2 is 38 seconds behind atomic time. Files on PC2 were archived. There are no problems to report. 04/13/2013 09:30 Darren I have verified that the PC's are collecting data and verified that the Centry link does not have an issue. I had the site Bio reset the sonicwall and it appears that restored the connection. 04/13/2013 07:22 darren@b SLC500:CommsFailure: Alarm not uncoomon PITtag was diverted properly. 04/11/2013 15:26 Alan No PIT tag detections occurred during the M4 upgrade on 4/11/2013. 04/11/2013 13:25 Troy At the site to upgrade M4 to 1.5.4.0. The configuration was modified so that there will be an email alert if a transceiver has not been heard from in over 65 mins. The new configurations were pushed up to the ftp server. There was a small file gap that could be filled with JDJ-2013-101-S-016 although there was not transceiver or PLC data in that file. No problems to report. 04/11/2013 06:07 darren@b SLC500:CommsFailure: The PITtag in question was diverted properly. 04/10/2013 09:15 Roger Performed site GMC on 4/10/2013. All transceivers were checked for tune and adjusted as needed. 10 sticks were thrown at the separator. All coils read all sticks, except A3, which read 9 of 10. All stick were diverted properly. PC1 is 14 seconds and PC2 was 29 seconds behind atomic time. Adjusted the clock on PC2 to within 1 second of PC1. Files on PC2 were archived. There are no problems to report. 04/09/2013 06:04 DGE_Robo DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/04/09 05:59:48 04/08/2013 07:03 Alan The former DST rules caused the Multimon file creation intervals to be off by one hour. At 0758 PDT 4-8-2013, data collection was exited and restarted on both PCs to re-establish proper file creation intervals. Files JDJ13098.102 & .202 were the last files created prior to this procedure and were submitted manually. Outstanding files on PC2 were archived. 04/05/2013 09:44 rclark User: rclark. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Clearing old errors. Error: F1: Exc. Power low. A4: Test Tag Failed. A2: Test Tag Failed. C2: Test Tag Failed. F1: Analog comm. 93: Test Tag Failed. C3: Test Tag Failed. 94: Test Tag Failed. 04/04/2013 06:58 scottl User: scottl. Site: JDJ. Comments: No Comments. Event date: 4/1/2013 7:00:00 AM. Site activity: up 04/02/2013 06:16 rclark User: rclark. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: transceiver was retuned on 4/1/2013. Error: 01: Test Tag Failed. 04/01/2013 10:24 Roger Performed site GMC on 4/1/2013. All transceivers were checked for tune and adjusted as needed. 10 sticks were thrown at the separator gate. All sicks were read on all coils except A3 which read 9 of 10. All sticks were diverted properly. Multimon start of season reset was performed. Files JDJ13091.207 and .210 were submitted as gap files.Total commander was loaded on the M4 PCs. There are no problems to report. 04/01/2013 06:14 rclark@b 01:TestTagFailure: This will be checked during todays site visit. 03/31/2013 09:59 scottl@b 01:TestTagFailure: Noted, detection efficiencies are not effected. 03/31/2013 06:06 DGE_Robo DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/03/31 05:56:12 03/31/2013 06:06 DGE_Robo SampleGateBypass (SBypass) changed from 'ON' to 'OFF' at 2013/03/31 05:56:12 03/31/2013 06:06 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at 2013/03/31 05:41:27 03/28/2013 15:06 DGE_Robo DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/03/28 12:06:15 03/28/2013 15:06 DGE_Robo SampleGateBypass (SBypass) changed from 'OFF' to 'ON' at 2013/03/28 12:06:15 03/28/2013 14:51 thumphre User: thumphrey. Site: JDJ. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Clearing alarms left over from being de-watered. FF is now watered up.. Error: 04: Exc current low. 04: Analog comm. 03: Analog comm. 03: Exc current low. 04: Overrun. 01: Test Tag Failed. 03/28/2013 14:50 thumphre User: thumphrey. Site: JDJ. Comments: The PLC reports the FF watered up. Event date: 3/28/2013 8:00:00 AM. Site activity: up 03/28/2013 14:46 Troy@bay 01:TestTagFailure,03:LowExcCurrent,04:LowExcCurrent,04:Overrun: FF watered up, clearing TASS. 03/28/2013 09:06 DGE_Robo DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/03/28 08:56:15 03/28/2013 09:06 DGE_Robo DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/03/28 08:41:15 03/28/2013 09:06 DGE_Robo DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/03/28 08:30:16 03/28/2013 09:06 DGE_Robo SampleGateBypass (SBypass) changed from 'ON' to 'OFF' at 2013/03/28 08:30:16 03/28/2013 09:06 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at 2013/03/28 06:08:33 03/28/2013 09:06 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at 2013/03/28 06:08:05 03/25/2013 14:35 Darren According to site biologist Greg K. the site will have water through the full flow on 3-28-13 and will begin sampling on 3-31-13. PSMFC will confirm on these dates. 03/21/2013 10:10 Scott_Li Re-directed the Network Time Protocol to synchronize to Pool.NTP.org Set task scheduler to trigger the time synchronization process every day and re-occur every hour indefinitely. Also turned on the history logging within task scheduler. This should keep the two M4 PC's in perfect time with each other and the atomic clock. 03/16/2013 08:01 troy@bay 04:LowExcCurrent,A2:InputSyncDetect,A2:ReaderReset: Site de-watered, clearing TASS. 03/15/2013 13:26 Troy Lab testing was conducted on the a copy of the site PLC and HMI programs. I forgot to remove the mail recipents on the lab copies so some bogus emails have been sent out. JDJ is not watered up and the PriBypass ect at B2J did not change state. Sorry for the confusion 03/11/2013 07:18 Troy@bay 03:LowExcCurrent,04:LowExcCurrent: FF de-watered, clearing TASS. 03/06/2013 15:07 Scott_Li On all M4 SByC PC's, set the time Sync process to run every 1 hrs rather than the default of 1 time per week. This is an attempt to keep the M4 clustering as synchronized as possible. 03/05/2013 07:49 darren@b 01:ReaderReset,02:ReaderReset,03:LowExcCurrent,04:LowExcCurrent,51:ReaderR eset,52:InputSyncDetect,52:ReaderReset,53:InputSyncDetect,53:ReaderReset,5 4:InputSyncDetect,54:ReaderReset,61:ReaderReset,62:InputSyncDetect,62:Read erReset,81:ReaderReset,82:InputSyncDetect,82:ReaderReset,83:InputSyncDetec t,83:ReaderReset,84:InputSyncDetect,84:ReaderReset,91:ReaderReset,92:Input SyncDetect,92:ReaderReset,93:InputSyncDetect,93:ReaderReset,94:InputSyncDe tect,94:ReaderReset,A1:ReaderReset,A2:InputSyncDetect,A2:RocketPortNoEOT,A 3:InputSyncDetect,A3:ReaderReset,A4:InputSyncDetect,A4:ReaderReset,C1:Read erReset,C2:InputSyncDetect,C2:ReaderReset,C3:InputSyncDetect,C3:ReaderRese t,C4:InputSyncDetect,C4:ReaderReset,E1:ReaderReset,E2:InputSyncDetect,E2:R eaderReset,F1:ReaderReset,F2:InputSyncDetect,F2:ReaderReset: Alarms, with the exception of the full flow, are due to a site power outage. The site is currently de-watered. 03/04/2013 09:06 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/03/04 07:33:33 03/04/2013 09:06 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/03/04 07:32:43 03/04/2013 09:05 DGE_Robo AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/03/04 07:32:43 03/04/2013 09:05 DGE_Robo AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/03/04 07:32:19 02/15/2013 08:29 Troy@bay 03:LowExcCurrent,04:LowExcCurrent: FF is de-watered, clearing TASS. 02/01/2013 07:39 Troy@bay 04:LowExcCurrent: FF is de-watered, clearing TASS. 01/29/2013 07:17 Troy@bay 04:LowExcCurrent: FF de-watered, clearing TASS. 01/13/2013 08:16 rclark@b 03:LowExcCurrent: The full flow is dewatered. 01/08/2013 12:04 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at 2013/01/08 09:40:06 01/08/2013 12:04 DGE_Robo PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at 2013/01/08 09:39:40 01/03/2013 08:41 Scott_Li Sites were upgraded to M4 ver. 1.5.1.0 per instructions listed on Basecamp. 01/02/2013 00:00 PTOC_Bot Annual log file initiation for JDJ #### End of Event Log for JDJ ###