EVENT LOG FOR SITE LMJ

        The first line of each entry contains a date/time stamp & who is reporting.
        The most recent entry is listed first.

Date       Time  Who
---------- ----- --------
10/31/2013 07:15 Alan
    User: Alan. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: No apparent reason,
    will continue to monitor.. Error:
    03: Virtual Tag Test Failed.
10/24/2013 14:02 rclark
    User: rclark. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Errors caused by
    PSMFC personnel during site visit.. Error:
    04: Virtual Tag Test Failed.
    03: Virtual Tag Test Failed.
    02: Reader Set To Master.
    03: Reader Set To Master.
    04: Reader Set To Master.
    02: Sync. Input Not Present.
    03: Sync. Input Not Present.
    04: Sync. Input Not Present.
10/24/2013 10:31 rclark
    On site 10/24/2013 to investigate elevated noise on FF transceiver 04.
    Tried retuning and resetting reader. Also tried placing 03 in standby to
    see if there was any change. The noise level was still elevated. Replaced
    transceiver 04. The noise level was initially low and then periodically
    would go high for 15 to 30 seconds. I then put transceivers 01, 02, and 03
    in standby. Transceiver 04 was then working normally. I put 01, 02, and 03
    back in scan mode and 04 was still ok. I put the original transceiver back
    in 04. It was still ok. I checked the sync connections and tried resetting
    all transceivers and placing them from stanby to scan multiple times in an
    attempt to duplicate the problem. All 4 transceivers continued to function
    properly with low noise. Will continue to monitor for further occurances
    of the increased noise.
10/18/2013 06:47 dchase
    User: dchase. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: PSMFC will
    investigate this one time failure during the next site GMC.. Error:
    04: Virtual Tag Test Failed.
10/16/2013 07:11 dchase
    User: dchase. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Alarm will be
    investigated during the next site GMC. It was a one time failure.. Error:
    04: Virtual Tag Test Failed.
10/15/2013 06:17 thumphre
    User: thumphrey. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Single TT Failure,
    clearing TASS.. Error:
    04: Virtual Tag Test Failed.
10/14/2013 07:16 dchase
    User: dchase. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Alarms will be
    investigated during the next GMC.. Error:
    04: Virtual Tag Test Failed.
10/10/2013 06:33 dchase
    User: dchase. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Alarm was addressed
    during the next site GMC.. Error:
    04: Virtual Tag Test Failed.
10/09/2013 15:16 rclark
    User: rclark. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Errors caused
    during transceiver replacement. Transceiver 03 was retuned.. Error:
    03: Tuning Capacitance High.
    03: Tuning Out Of Range.
    03: Antenna Tuning Failed.
    02: Reader Set To Master.
    03: Reader Set To Master.
    04: Reader Set To Master.
    02: Sync. Input Not Present.
    03: Sync. Input Not Present.
    04: Sync. Input Not Present.
    03: Tuning Capacitance Low.
10/09/2013 08:02 rclark
    On site 10/9/2013 to replace FF transceiver 01. Also retuned transceiver
    03. There are no problems to report.
10/09/2013 06:50 thumphre
    User: thumphrey. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: A GMC is scheduled
    for today, alarms will be addressed at that time.. Error:
    01: Tuning Capacitance High.
    01: Tuning Out Of Range.
    01: Antenna Current Low.
    01: Antenna Tuning Failed.
    01: Noise Level High.
    02: Noise Level High.
    03: Noise Level High.
    04: Noise Level High.
    02: Reader Set To Master.
    03: Reader Set To Master.
    02: Sync. Input Not Present.
    03: Sync. Input Not Present.
    04: Sync. Input Not Present.
    01: Tuning Capacitance Low.
    01: Virtual Tag Test Failed.
    02: Virtual Tag Test Failed.
    03: Tuning Capacitance High.
    03: Tuning Out Of Range.
10/08/2013 13:52 rclark
    On site 10/8/2013 to check full flow transceiver 01 tuning. Was able to
    get the transceiver to tune in range by moving a capacitor jumper.
    However, the transceiver was exhibiting periodic high levels of noise and
    was also impacting the downstream transceivers. The transceiver was shut
    off and will be replaced tomorrow.
10/08/2013 06:39 dchase
    User: dchase. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Alarms will be
    addressed today during a site GMC.. Error:
    01: Tuning Capacitance High.
    01: Tuning Out Of Range.
    04: Virtual Tag Test Failed.
10/07/2013 06:54 thumphre
    User: thumphrey. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: PSMFC will address
    this on the next site visit.. Error:
    01: Tuning Capacitance High.
    01: Tuning Out Of Range.
10/06/2013 06:40 Alan
    User: Alan. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Will address during
    the next site visit.. Error:
    01: Tuning Capacitance High.
    01: Tuning Out Of Range.
    04: Virtual Tag Test Failed.
10/05/2013 10:09 Alan
    User: Alan. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: This will be
    addressed during the next site visit.. Error:
    01: Tuning Capacitance High.
    01: Tuning Out Of Range.
10/05/2013 10:06 Alan
    User: Alan. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: This will be
    addressed during the next site visit. This transceiver is reading at high
    efficiency.. Error:
    01: Tuning Capacitance High.
    01: Tuning Out Of Range.
10/04/2013 07:47 Alan
    User: Alan. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: This will be
    addressed during the next site visit.. Error:
    01: Tuning Capacitance High.
    01: Tuning Out Of Range.
10/02/2013 08:58 Alan
    User: Alan. Site: LMJ. Comments: Site personnel report that the JFF was
    dewatered on Oct.1, 2013 at 0700 hrs..  Event date: 10/1/2013 7:00:00 AM.
    Site activity: down
10/02/2013 08:56 Alan
    User: Alan. Site: LMJ. Antenna Group Name: . Antenna: No errors were
    removed. Comments: Site personnel report that the JFF was dewatered on
    Oct.1, 2013 at 0700 hrs.. Error:
10/02/2013 08:53 Alan
    User: Alan. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: This will be
    addressed during the next site visit. Error:
    01: Tuning Capacitance High.
    01: Tuning Out Of Range.
10/02/2013 07:27 scottl
    Site personnel report that the JFF was dewatered on Oct.1, 2013 at 0700
    hrs.
10/01/2013 13:47 dlwarf
    Testing event log.
10/01/2013 13:47 dlwarf
    Testing event log.
10/01/2013 12:17 scottl
    User: scottl. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: No comments. Error:
    01: Antenna Tuning Failed.
    01: Tuning Capacitance High.
    01: Tuning Out Of Range.
    04: Virtual Tag Test Failed.
    03: Virtual Tag Test Failed.
09/25/2013 08:53 Alan
    User: Alan. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: This will be
    investigated during the next site visit.. Error:
    01: Tuning Capacitance High.
    01: Tuning Out Of Range.
09/23/2013 07:24 Alan
    User: Alan. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: This will be
    addressed during then next site visit.. Error:
    01: Tuning Capacitance High.
    01: Tuning Out Of Range.
09/22/2013 06:37 rclark
    User: rclark. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: This will be
    addressed during then next site visit. Error:
    01: Tuning Capacitance High.
    01: Tuning Out Of Range.
09/21/2013 06:17 rclark
    User: rclark. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: This will be
    addressed during the next site visit. Error:
    01: Tuning Capacitance High.
    01: Tuning Out Of Range.
    01: Antenna Tuning Failed.
09/20/2013 06:12 rclark
    User: rclark. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Noted. Error:
    A3: Analog comm.
    A3: Exc. Power low.
09/20/2013 06:11 rclark
    User: rclark. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: This will be
    addressed during the next site visit.. Error:
    01: Tuning Capacitance High.
    01: Tuning Out Of Range.
09/19/2013 10:49 rclark
    User: rclark. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: No comments. Error:
    LMJ: Tuning Capacitance High.
    LMJ: Tuning Out Of Range.
09/19/2013 06:25 rclark
    User: rclark. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Noted. Error:
    01: Tuning Capacitance High.
    01: Tuning Out Of Range.
09/18/2013 06:37 thumphre
    User: thumphrey. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Noted. Error:
    01: Tuning Capacitance High.
    01: Tuning Out Of Range.
09/18/2013 06:02 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/09/18 05:56:19
09/18/2013 06:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/09/18 05:55:08
09/18/2013 06:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/09/18 05:55:08
09/18/2013 06:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/09/18
    05:55:07
09/18/2013 06:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/09/18
    05:55:07
09/18/2013 06:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/09/18
    05:55:06
09/18/2013 06:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/09/18
    05:55:06
09/17/2013 09:02 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/09/17 06:08:42
09/17/2013 06:01 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/09/17
    05:59:20
09/17/2013 06:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/09/17
    05:59:20
09/17/2013 06:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/09/17 05:59:20
09/17/2013 06:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/09/17 05:59:20
09/17/2013 06:01 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/09/17
    05:59:18
09/17/2013 06:01 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/09/17
    05:59:18
09/16/2013 06:17 rclark
    User: rclark. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: No comments. Error:
    A3: Analog comm.
    A3: Exc. Power low.
09/16/2013 06:15 rclark
    User: rclark. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: No comments. Error:
    LMJ: Analog comm.
    LMJ: Exc. Power low.
09/16/2013 06:01 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/09/16 05:58:39
09/16/2013 06:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/09/16 05:55:49
09/16/2013 06:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/09/16
    05:55:49
09/16/2013 06:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/09/16 05:55:48
09/16/2013 06:01 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/09/16
    05:55:48
09/16/2013 06:01 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/09/16
    05:55:47
09/16/2013 06:01 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/09/16
    05:55:46
09/15/2013 09:02 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/09/15 06:00:54
09/15/2013 07:53 thumphre
    User: thumphrey. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: No comments. Error:
    A3: Analog comm.
    A3: Exc. Power low.
09/15/2013 07:35 Troy@bay
    A1:InputSyncDetect,A1:InputSyncLost,A3:InputSyncDetect,A3:InputSyncLost,A4
    :ReaderReset: Random Reader Reset
09/15/2013 06:00 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/09/15
    05:48:16
09/15/2013 06:00 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/09/15
    05:48:16
09/15/2013 06:00 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/09/15 05:48:16
09/15/2013 06:00 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/09/15 05:48:16
09/15/2013 06:00 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/09/15
    05:48:15
09/15/2013 06:00 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/09/15
    05:48:15
09/14/2013 21:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/09/14 18:57:26
09/14/2013 21:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/09/14
    18:57:25
09/14/2013 21:01 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/09/14 18:57:25
09/14/2013 21:01 DGE_Robo
    B_GateTrouble (B_Trouble) changed from 'ON' to 'OFF' at 2013/09/14
    18:57:25
09/14/2013 21:01 DGE_Robo
    AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/09/14 18:57:25
09/14/2013 21:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/09/14 18:57:16
09/14/2013 21:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/09/14
    18:57:16
09/14/2013 21:01 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/09/14 18:57:16
09/14/2013 21:01 DGE_Robo
    B_GateTrouble (B_Trouble) changed from 'OFF' to 'ON' at 2013/09/14
    18:57:16
09/14/2013 21:01 DGE_Robo
    AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/09/14 18:57:16
09/14/2013 06:02 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/09/14 05:51:55
09/14/2013 06:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/09/14 05:49:32
09/14/2013 06:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/09/14 05:49:32
09/14/2013 06:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/09/14
    05:49:31
09/14/2013 06:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/09/14
    05:49:31
09/14/2013 06:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/09/14
    05:49:31
09/14/2013 06:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/09/14
    05:49:31
09/13/2013 09:01 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/09/13 06:04:56
09/13/2013 06:55 thumphre
    User: thumphrey. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: No comments. Error:
    LMJ: Analog comm.
    LMJ: Exc. Power low.
    LMJ: Virtual Tag Test Failed.
09/13/2013 06:44 thumphre
    User: thumphrey. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: No comments. Error:
    A3: Analog comm.
    A3: Exc. Power low.
09/13/2013 06:43 thumphre
    User: thumphrey. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: No comments. Error:
    04: Virtual Tag Test Failed.
09/13/2013 06:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/09/13
    05:50:25
09/13/2013 06:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/09/13
    05:50:25
09/13/2013 06:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/09/13 05:50:25
09/13/2013 06:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/09/13 05:50:25
09/13/2013 06:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/09/13
    05:50:24
09/13/2013 06:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/09/13
    05:50:24
09/12/2013 08:59 rclark
    Performed site GMC on 9/12/2013. All transceivers were checked for tune
    and adjusted as needed. Multimon PC1 was 1 minute 12 seconds and PC2 was 1
    minute 45 seconds behind atomic time. Adjusted clocks to within 1 second
    of atomic time. LMJ13255.205 was submitted as a gap file. Files on PC2
    were archived. There are no problems to report.
09/12/2013 06:03 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/09/12 05:50:00
09/12/2013 06:03 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/09/12 05:46:55
09/12/2013 06:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/09/12 05:46:55
09/12/2013 06:03 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/09/12
    05:46:55
09/12/2013 06:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/09/12
    05:46:55
09/12/2013 06:03 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/09/12
    05:46:54
09/12/2013 06:03 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/09/12
    05:46:54
09/11/2013 09:03 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/09/11 06:04:52
09/11/2013 06:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/09/11
    05:58:44
09/11/2013 06:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/09/11
    05:58:44
09/11/2013 06:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/09/11
    05:58:44
09/11/2013 06:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/09/11
    05:58:44
09/11/2013 06:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/09/11 05:58:44
09/11/2013 06:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/09/11 05:58:44
09/10/2013 06:03 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/09/10 05:59:04
09/10/2013 06:03 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/09/10 05:57:01
09/10/2013 06:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/09/10 05:57:00
09/10/2013 06:03 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/09/10
    05:57:00
09/10/2013 06:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/09/10
    05:57:00
09/10/2013 06:03 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/09/10
    05:57:00
09/10/2013 06:03 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/09/10
    05:57:00
09/09/2013 12:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/09/09 09:31:25
09/09/2013 12:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/09/09
    09:31:25
09/09/2013 12:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/09/09
    09:31:25
09/09/2013 12:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/09/09
    09:31:25
09/09/2013 12:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/09/09
    09:31:25
09/09/2013 12:02 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/09/09 09:31:25
09/09/2013 12:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/09/09
    09:31:15
09/09/2013 12:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/09/09 09:31:15
09/09/2013 12:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/09/09
    09:31:15
09/09/2013 12:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/09/09
    09:31:15
09/09/2013 12:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/09/09
    09:31:15
09/09/2013 12:02 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/09/09 09:31:15
09/09/2013 09:02 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/09/09 06:03:11
09/09/2013 06:03 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/09/09
    05:58:38
09/09/2013 06:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/09/09
    05:58:38
09/09/2013 06:03 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/09/09 05:58:38
09/09/2013 06:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/09/09 05:58:38
09/09/2013 06:03 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/09/09
    05:58:36
09/09/2013 06:03 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/09/09
    05:58:36
09/08/2013 07:48 dchase
    User: dchase. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Clearing TASS..
    Error:
    A3: Analog comm.
    A3: Exc. Power low.
09/08/2013 06:03 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/09/08 05:59:33
09/08/2013 06:03 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/09/08
    05:53:56
09/08/2013 06:03 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/09/08
    05:53:56
09/08/2013 06:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/09/08 05:53:54
09/08/2013 06:03 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/09/08 05:53:54
09/08/2013 06:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/09/08
    05:53:54
09/08/2013 06:03 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/09/08
    05:53:54
09/07/2013 09:03 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/09/07 06:05:43
09/07/2013 08:35 dchase
    User: dchase. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Clearing TASS.
    Error:
    02: Virtual Tag Test Failed.
    04: Virtual Tag Test Failed.
09/07/2013 08:34 dchase
    User: dchase. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Clearing TASS.
    Error:
    A3: Analog comm.
    A3: Exc. Power low.
09/07/2013 06:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/09/07
    05:59:00
09/07/2013 06:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/09/07
    05:59:00
09/07/2013 06:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/09/07
    05:58:59
09/07/2013 06:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/09/07
    05:58:59
09/07/2013 06:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/09/07 05:58:59
09/07/2013 06:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/09/07 05:58:59
09/06/2013 06:03 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/09/06 06:00:00
09/06/2013 06:03 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/09/06
    05:56:05
09/06/2013 06:03 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/09/06
    05:56:04
09/06/2013 06:03 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/09/06 05:56:03
09/06/2013 06:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/09/06 05:56:03
09/06/2013 06:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/09/06
    05:56:03
09/06/2013 06:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/09/06
    05:56:03
09/05/2013 09:03 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/09/05 06:00:56
09/05/2013 06:57 thumphre
    User: thumphrey. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Clearing all System
    and PLC errors.. Error:
    LMJ: Excessive noise level.
    LMJ: Noise Level High.
    LMJ: Virtual Tag Test Failed.
    LMJ: Reader Set To Master.
    LMJ: Sync. Input Not Present.
    LMJ: Analog comm.
    LMJ: Exc. Power low.
    LMJ: Test Tag Failed.
    LMJ: Tuning Capacitance Low.
    LMJ: Tuning Out Of Range.
    LMJ: An error occurred formatting DeviceNoiseReport message '  Noise
    Average:                        0%':.
    LMJ: An error occurred formatting DeviceNoiseReport message '  Noise Peak:
    0%':.
    LMJ: Antenna Current Low.
    LMJ: The following transceiver data could not be processed: Noise Info:.
    LMJ: Tuning Capacitance High.
09/05/2013 06:03 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/09/05
    05:58:22
09/05/2013 06:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/09/05
    05:58:21
09/05/2013 06:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/09/05 05:58:21
09/05/2013 06:03 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/09/05
    05:56:36
09/05/2013 06:03 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/09/05
    05:56:36
09/05/2013 06:03 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/09/05 05:56:36
09/04/2013 09:02 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/09/04 08:50:50
09/04/2013 09:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/09/04 08:47:21
09/04/2013 09:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/09/04
    08:47:21
09/04/2013 09:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/09/04 08:47:19
09/04/2013 09:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/09/04
    08:47:19
09/03/2013 15:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/09/03
    12:00:01
09/03/2013 15:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/09/03
    12:00:01
09/03/2013 15:02 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/09/03 12:00:01
09/03/2013 13:02 Alan
    File LMJ13224.207 was manually submitted today as per the pitevent of
    8/12/2013.
09/03/2013 12:46 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/08/12
    13:38:28
09/03/2013 12:46 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/08/12
    13:38:28
09/03/2013 12:46 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/08/12 13:38:28
09/03/2013 12:46 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/08/12
    13:38:28
09/03/2013 12:46 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/08/12
    13:38:28
09/02/2013 03:03 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/09/02 01:52:25
09/02/2013 03:03 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/09/02
    01:50:43
09/02/2013 03:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/09/02
    01:50:43
09/02/2013 03:03 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/09/02 01:50:43
09/02/2013 03:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/09/02 01:50:43
09/02/2013 03:03 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/09/02
    01:50:42
09/02/2013 03:03 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/09/02
    01:50:42
09/02/2013 00:04 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/09/01 21:52:13
09/02/2013 00:04 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/09/01 21:49:48
09/02/2013 00:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/09/01 21:49:48
09/02/2013 00:04 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/09/01
    21:49:48
09/02/2013 00:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/09/01
    21:49:48
09/02/2013 00:04 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/09/01
    21:49:46
09/02/2013 00:04 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/09/01
    21:49:46
09/01/2013 21:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/09/01 18:05:04
09/01/2013 21:03 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/09/01
    18:05:04
09/01/2013 21:03 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/09/01
    18:05:04
09/01/2013 21:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/09/01
    18:05:04
09/01/2013 21:03 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/09/01
    18:05:04
09/01/2013 21:03 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/09/01 18:05:04
09/01/2013 21:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/09/01
    18:04:54
09/01/2013 21:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/09/01 18:04:54
09/01/2013 21:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/09/01
    18:04:54
09/01/2013 21:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/09/01
    18:04:54
09/01/2013 21:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/09/01
    18:04:54
09/01/2013 21:02 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/09/01 18:04:54
09/01/2013 07:07 rclark
    User: rclark. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Noted. Error:
    A3: Analog comm.
    A3: Exc. Power low.
08/31/2013 06:49 rclark
    User: rclark. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Noted. Error:
    A3: Analog comm.
    A3: Exc. Power low.
08/30/2013 15:02 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/08/30 12:37:03
08/30/2013 15:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/08/30
    12:31:54
08/30/2013 15:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/08/30
    12:31:54
08/30/2013 15:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/08/30 12:31:54
08/30/2013 15:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/08/30 12:31:54
08/30/2013 15:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/08/30
    12:31:53
08/30/2013 15:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/08/30
    12:31:53
08/29/2013 06:16 rclark
    User: rclark. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Noted. Error:
    A3: Analog comm.
    A3: Exc. Power low.
08/29/2013 06:11 rclark
    User: rclark. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Errors caused
    during site GMC. Error:
    02: Reader Set To Master.
    03: Reader Set To Master.
    04: Reader Set To Master.
    02: Sync. Input Not Present.
    03: Sync. Input Not Present.
    04: Sync. Input Not Present.
08/28/2013 09:14 rclark
    Performed site GMC on 8/28/2013. All transceivers were checked for tune
    and adjusted as needed. When adjusteing the exhaust valve for gate B, the
    valve broke. The valve was replaced and adjusted. 10 sticks were thrown on
    the A and B gates. All sticks were read and diverted properly. Multimon
    PC1 is 37 seconds and PC2 is 52 seconds behind atomic time. Files on PC2
    were archived. There are no additional problems to report.
08/26/2013 06:15 rclark
    User: rclark. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Noted. Error:
    A3: Analog comm.
    A3: Exc. Power low.
08/25/2013 09:14 Alan
    User: Alan. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Noted. Error:
    A3: Analog comm.
    A3: Exc. Power low.
08/21/2013 09:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/08/21
    08:46:48
08/21/2013 09:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/08/21
    08:46:47
08/21/2013 09:02 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/08/21 08:45:45
08/21/2013 09:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/08/21
    08:43:43
08/21/2013 09:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/08/21
    08:43:43
08/21/2013 09:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/08/21
    08:43:36
08/21/2013 09:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/08/21
    08:43:36
08/21/2013 09:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/08/21 08:43:16
08/21/2013 09:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/08/21
    08:43:16
08/21/2013 09:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/08/21 08:43:14
08/21/2013 09:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/08/21
    08:43:14
08/21/2013 09:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/08/21
    08:43:06
08/21/2013 09:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/08/21
    08:43:05
08/21/2013 07:01 Alan
    User: Alan. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Noted. Error:
    A3: Analog comm.
    A3: Exc. Power low.
08/20/2013 03:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/08/20
    01:59:56
08/20/2013 03:01 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/08/20 02:02:06
08/20/2013 03:01 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/08/20
    01:59:57
08/20/2013 03:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/08/20 01:59:57
08/20/2013 03:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/08/20 01:59:56
08/20/2013 00:22 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/08/19 21:56:52
08/20/2013 00:22 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/08/19 21:52:38
08/20/2013 00:22 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/08/19 21:52:38
08/20/2013 00:22 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/08/19
    21:52:37
08/20/2013 00:22 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/08/19
    21:52:37
08/19/2013 09:20 Alan
    User: Alan. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Noted. Error:
    A3: Analog comm.
    A3: Exc. Power low.
08/19/2013 09:17 Alan
    User: Alan. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: No apparent reason
    for this one time alarm. PTAGIS Field Operations will continue to
    monitor.. Error:
    04: Virtual Tag Test Failed.
08/17/2013 03:01 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/08/17 02:01:34
08/17/2013 03:01 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/08/17
    02:00:41
08/17/2013 03:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/08/17
    02:00:41
08/17/2013 03:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/08/17 02:00:41
08/17/2013 03:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/08/17 02:00:41
08/17/2013 00:09 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/08/16 21:59:43
08/17/2013 00:09 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/08/16
    21:46:28
08/17/2013 00:09 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/08/16
    21:46:28
08/17/2013 00:09 DGE_Robo
    B_GateTrouble (B_Trouble) changed from 'ON' to 'OFF' at 2013/08/16
    21:46:28
08/17/2013 00:09 DGE_Robo
    AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/08/16 21:46:28
08/17/2013 00:09 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/08/16
    21:46:18
08/17/2013 00:09 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/08/16
    21:46:18
08/17/2013 00:09 DGE_Robo
    B_GateTrouble (B_Trouble) changed from 'OFF' to 'ON' at 2013/08/16
    21:46:18
08/17/2013 00:09 DGE_Robo
    AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/08/16 21:46:18
08/17/2013 00:09 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/08/16 21:43:02
08/17/2013 00:09 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/08/16
    21:43:02
08/17/2013 00:09 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/08/16 21:43:01
08/17/2013 00:09 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/08/16
    21:43:01
08/17/2013 00:09 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/08/16
    21:42:54
08/17/2013 00:09 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/08/16
    21:42:52
08/16/2013 09:26 scottl
    Site personnel report that the facility went to primary bypass on 8/14 at
    1500 hrs. All fish transport has been suspended until after labor day due
    some biological condition. Sampling will continue every 3rd day starting
    either 8/17 or 18th at 2300 hrs to observe this condition.
08/14/2013 15:01 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/08/14 13:59:54
08/14/2013 15:01 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/08/14
    13:47:19
08/14/2013 15:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/08/14
    13:47:18
08/14/2013 15:01 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/08/14
    13:47:17
08/14/2013 15:01 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/08/14
    13:47:17
08/14/2013 09:04 rclark@b
    04:InputSyncDetect,04:InputSyncLost:  Error caused by PSMFC personnel
    during transceiver replacement.
08/13/2013 07:29 dlwarf
    User: dlwarf. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Alarms generated
    during upgrades to FS2020s yesterday.. Error:
    01: Tuning Capacitance Low.
    01: Tuning Out Of Range.
    01: Antenna Current Low.
    02: Antenna Current Low.
    02: Reader Set To Master.
    03: Reader Set To Master.
    04: Reader Set To Master.
    02: Sync. Input Not Present.
    03: Sync. Input Not Present.
    04: Sync. Input Not Present.
    01: Tuning Capacitance High.
08/12/2013 14:08 rclark
    On-site 8/12/2013 to swap out full flow transceivers with FS2020s. The
    transceivers were replaced and them M4 platform config was updated and
    uploaded to the server. All other transceivers were checked for tune.
    Multimon PC1 and PC2 were over a minute behind atomic time. Updated clocks
    to within 1 second of atomic time. LMJ13224,207 was submitted as a gap
    file. Files on PC2 were archived.
08/12/2013 06:36 darren@b
    81:ReaderReset,82:InputSyncDetect,82:InputSyncLost: Alarm caused by a
    reader reset.
08/11/2013 07:24 darren@b
    11:ReaderReset,12:InputSyncDetect,12:InputSyncLost: Alarm caused by a
    reader reset.
08/10/2013 07:39 dchase
    User: dchase. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Clearing TASS..
    Error:
    A3: Analog comm.
    A3: Exc. Power low.
08/10/2013 07:13 darren@b
    41:ReaderReset,42:InputSyncDetect,42:InputSyncLost: Older alarms. Clearing
    TASS.
08/07/2013 09:23 Alan
    User: Alan. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Noted. Error:
    A3: Analog comm.
    A3: Exc. Power low.
08/07/2013 06:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/08/07
    04:09:45
08/07/2013 06:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/08/07
    04:09:45
08/07/2013 06:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/08/07
    04:04:21
08/07/2013 06:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/08/07
    04:04:21
08/05/2013 15:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/08/05
    14:02:31
08/05/2013 15:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/08/05
    14:02:30
08/03/2013 15:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/08/03
    14:06:49
08/03/2013 15:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/08/03
    14:06:47
08/03/2013 08:00 thumphre
    User: thumphrey. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Alarm not of
    concern at this time.. Error:
    04: Analog comm.
07/31/2013 06:26 thumphre
    User: thumphrey. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Noted. Error:
    A3: Analog comm.
    A3: Exc. Power low.
07/30/2013 15:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/07/30
    13:55:40
07/30/2013 15:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/07/30
    13:53:34
07/30/2013 07:24 thumphre
    User: thumphrey. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Noted. Error:
    A3: Analog comm.
    A3: Exc. Power low.
07/29/2013 09:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/07/29 07:59:25
07/29/2013 09:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/07/29 07:59:24
07/29/2013 09:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/07/29 07:59:20
07/29/2013 09:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/07/29 07:59:20
07/28/2013 15:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/07/28
    13:59:11
07/28/2013 15:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/07/28
    13:59:10
07/28/2013 15:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/07/28
    13:55:20
07/28/2013 15:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/07/28
    13:55:20
07/28/2013 15:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/07/28 13:23:18
07/28/2013 15:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/07/28
    13:23:18
07/28/2013 15:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/07/28 13:23:18
07/28/2013 15:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/07/28
    13:23:18
07/28/2013 15:02 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/07/28 13:23:18
07/28/2013 15:02 DGE_Robo
    AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/07/28 13:23:18
07/28/2013 15:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/07/28
    13:23:08
07/28/2013 15:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/07/28 13:23:08
07/28/2013 15:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/07/28
    13:23:08
07/28/2013 15:02 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/07/28 13:23:08
07/28/2013 15:02 DGE_Robo
    AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/07/28 13:23:08
07/28/2013 12:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/07/28
    10:58:59
07/28/2013 12:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/07/28
    10:53:09
07/26/2013 15:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/07/26
    14:04:18
07/26/2013 15:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/07/26
    14:02:44
07/24/2013 15:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/07/24
    13:56:32
07/24/2013 15:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/07/24
    13:56:32
07/24/2013 15:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/07/24
    13:52:46
07/24/2013 15:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/07/24
    13:52:46
07/23/2013 15:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/07/23
    13:55:30
07/23/2013 15:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/07/23
    13:53:51
07/23/2013 08:42 rclark
    Performed site GMC on 7/23/2013. All transceivers were checked for tune
    and adjusted as needed. 10 sticks were thrown at the A and B gates. All
    sticks were read on all coils and diverted properly. Multimon PC1 is 27
    seconds and PC2 is 37 seconds behind atomic time. Files on PC2 were
    archived. There are no problems to report.
07/19/2013 09:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/07/19 08:53:15
07/19/2013 09:02 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/07/19 08:53:15
07/19/2013 09:02 DGE_Robo
    AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/07/19 08:53:15
07/19/2013 09:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/07/19 08:53:05
07/19/2013 09:02 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/07/19 08:53:05
07/19/2013 09:02 DGE_Robo
    AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/07/19 08:53:05
07/19/2013 06:20 scottl
    User: scottl. Site: LMJ. Antenna Group Name: A-SEPARATOR GATE. Antenna:
    A3. Comments: No comments. Error: A3: Exc. Power low
07/19/2013 06:20 scottl
    User: scottl. Site: LMJ. Antenna Group Name: A-SEPARATOR GATE. Antenna:
    A3. Comments: No comments. Error: A3: Analog comm
07/17/2013 15:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/07/17 13:51:39
07/17/2013 15:01 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/07/17 13:51:39
07/17/2013 15:01 DGE_Robo
    AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/07/17 13:51:39
07/17/2013 15:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/07/17 13:51:29
07/17/2013 15:01 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/07/17 13:51:29
07/17/2013 15:01 DGE_Robo
    AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/07/17 13:51:29
07/17/2013 06:22 scottl
    User: scottl. Site: LMJ. Antenna: A3. Comments: Noted, will monitor.
    Message: show errors
07/15/2013 06:22 scottl
    User: scottl. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: No comments. Error:
    A3: Analog comm.
    A3: Exc. Power low.
07/12/2013 18:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/07/12 15:24:43
07/12/2013 18:02 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/07/12 15:24:43
07/12/2013 18:02 DGE_Robo
    AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/07/12 15:24:43
07/12/2013 18:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/07/12 15:24:33
07/12/2013 18:02 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/07/12 15:24:33
07/12/2013 18:02 DGE_Robo
    AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/07/12 15:24:33
07/11/2013 09:03 rclark
    Performed site GMC on 7/11/2013. All transceivers were checked for tune
    and adjusted as needed. Threw 10 sticks at the A and B gates. All sticks
    were read on all transceivers and diverted properly. Multimon PC1 was 51
    seconds behind and PC2 was 16 seconds ahead of atomic time. Adjusted
    clocks to within 1 second of atomic time. LMJ13192.206 was submitted as a
    gap file. Files on PC2 were archived. There are no problems to report.
07/11/2013 07:59 alan@bay
    11:ReaderReset,12:InputSyncDetect,12:ReaderReset,13:InputSyncDetect,13:Rea
    derReset,21:ReaderReset,22:InputSyncDetect,22:ReaderReset,23:InputSyncDete
    ct,23:ReaderReset,31:ReaderReset,32:InputSyncDetect,32:ReaderReset,33:Inpu
    tSyncDetect,33:ReaderReset,41:ReaderReset,42:InputSyncDetect,42:ReaderRese
    t,43:InputSyncDetect,43:ReaderReset,51:ReaderReset,52:InputSyncDetect,52:R
    eaderReset,61:ReaderReset,62:InputSyncDetect,62:ReaderReset,81:ReaderReset
    ,82:InputSyncDetect,82:ReaderReset,91:ReaderReset,92:InputSyncDetect,92:Re
    aderReset,93:ReaderReset,A1:InputSyncDetect,A1:ReaderReset,A2:InputSyncDet
    ect,A2:ReaderReset,A3:InputSyncDetect,A3:ReaderReset,A4:ReaderReset,B1:Rea
    derReset,B2:InputSyncDetect,B2:ReaderReset,B3:InputSyncDetect,B3:ReaderRes
    et,B4:InputSyncDetect,B4:ReaderReset,F1:InputSyncDetect,F1:ReaderReset,F2:
    ReaderReset:         Cleared on new TASS
07/11/2013 07:20 Alan
    User: Alan. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Noted. Error:
    A3: Analog comm.
    A3: Exc. Power low.
07/10/2013 15:03 DGE_Robo
    AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/07/10 14:02:31
07/10/2013 15:03 DGE_Robo
    AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/07/10 14:00:17
07/10/2013 12:03 DGE_Robo
    AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/07/10 10:59:37
07/10/2013 12:03 DGE_Robo
    AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/07/10 10:57:23
07/10/2013 10:03 Alan
    User: Alan. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Noted. Error:
    A3: Analog comm.
    A3: Exc. Power low.
07/08/2013 08:14 Alan
    User: Alan. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: This will be
    investigated during the next site visit. This transceiver is PIT tags and
    timer tags well.. Error:
    A3: Analog comm.
    A3: Exc. Power low.
07/05/2013 15:04 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/07/05
    14:56:40
07/05/2013 15:04 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/07/05
    14:55:24
07/05/2013 15:04 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/07/05
    14:02:21
07/05/2013 06:38 rclark
    User: rclark. Site: LMJ. Antenna Group Name: A-SEPARATOR GATE. Antenna:
    A3. Comments: Noted. Error: A3: Exc. Power low
07/05/2013 06:38 rclark
    User: rclark. Site: LMJ. Antenna Group Name: A-SEPARATOR GATE. Antenna:
    A3. Comments: Noted. Error: A3: Analog comm
07/05/2013 00:10 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/07/04
    23:14:18
07/05/2013 00:10 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/07/04
    23:18:46
07/05/2013 00:10 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/07/04
    23:14:17
07/05/2013 00:10 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/07/04
    23:27:22
07/05/2013 00:10 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/07/04
    23:23:08
07/05/2013 00:10 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/07/04 23:23:08
07/05/2013 00:10 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/07/04
    23:23:07
07/05/2013 00:10 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/07/04 23:18:47
07/05/2013 00:10 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/07/04
    23:18:47
07/05/2013 00:10 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/07/04 23:14:18
07/04/2013 15:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/07/04 14:01:19
07/04/2013 15:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/07/04
    14:01:18
07/04/2013 06:25 rclark
    User: rclark. Site: LMJ. Antenna Group Name: A-SEPARATOR GATE. Antenna:
    A3. Comments: Noted. Error: A3: Exc. Power low
07/04/2013 06:25 rclark
    User: rclark. Site: LMJ. Antenna Group Name: A-SEPARATOR GATE. Antenna:
    A3. Comments: Noted. Error: A3: Analog comm
07/04/2013 06:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/07/04
    03:57:15
07/04/2013 06:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/07/04
    03:52:12
07/04/2013 06:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/07/04 03:52:12
07/04/2013 06:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/07/04
    03:52:11
07/03/2013 00:22 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/07/02
    22:08:02
07/03/2013 00:22 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/07/02 22:14:39
07/03/2013 00:22 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/07/02
    22:14:39
07/03/2013 00:22 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/07/02 22:14:40
07/03/2013 00:22 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/07/02
    22:08:01
07/02/2013 15:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/07/02 13:59:21
07/02/2013 15:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/07/02
    13:59:20
07/02/2013 00:05 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/07/01
    23:22:13
07/02/2013 00:05 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/07/01
    23:16:26
07/02/2013 00:05 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/07/01
    23:16:25
07/02/2013 00:05 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/07/01 23:16:25
07/02/2013 00:05 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/07/01 23:03:44
07/02/2013 00:05 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/07/01
    23:03:44
07/02/2013 00:05 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/07/01
    23:03:42
07/02/2013 00:05 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/07/01
    23:02:18
07/02/2013 00:05 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/07/01
    23:02:17
07/02/2013 00:04 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/07/01 23:02:17
07/01/2013 15:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/07/01
    13:57:24
07/01/2013 15:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/07/01 13:57:25
07/01/2013 15:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/07/01 13:57:25
07/01/2013 15:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/07/01
    13:57:24
07/01/2013 00:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/30
    22:06:31
07/01/2013 00:04 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/30
    21:59:16
07/01/2013 00:04 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/30
    21:23:45
07/01/2013 00:04 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/30 21:23:45
07/01/2013 00:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/30
    21:59:15
07/01/2013 00:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/30 21:59:14
07/01/2013 00:03 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/30
    21:29:59
07/01/2013 00:03 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/06/30
    21:23:46
06/30/2013 15:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/30 13:54:57
06/30/2013 15:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/30 13:54:57
06/30/2013 15:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/06/30
    13:54:56
06/30/2013 15:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/06/30
    13:54:56
06/30/2013 07:21 Alan
    User: Alan. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: This will be
    addressed during the next site visit.. Error:
    A3: Analog comm.
    A3: Exc. Power low.
06/30/2013 00:25 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/29
    22:59:08
06/30/2013 00:25 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/29
    23:10:35
06/30/2013 00:25 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/29
    23:05:36
06/30/2013 00:25 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/29 23:05:36
06/30/2013 00:25 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/29
    23:05:35
06/30/2013 00:25 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/29
    23:04:45
06/30/2013 00:25 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/06/29
    22:59:08
06/30/2013 00:25 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/29 22:59:08
06/29/2013 15:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/29 14:01:56
06/29/2013 15:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/06/29
    14:01:55
06/29/2013 15:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/29 14:01:55
06/29/2013 15:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/06/29
    14:01:54
06/29/2013 06:14 Alan
    User: Alan. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Noted. This
    transceiver is reading PIT tags well.. . Error:
    A3: Analog comm.
    A3: Exc. Power low.
06/29/2013 00:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/28
    23:31:39
06/29/2013 00:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/28 23:26:14
06/29/2013 00:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/28
    23:26:14
06/29/2013 00:03 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/28
    23:26:14
06/29/2013 00:03 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/28
    23:24:49
06/29/2013 00:03 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/28
    23:17:41
06/29/2013 00:03 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/06/28
    23:17:42
06/29/2013 00:03 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/28 23:17:41
06/28/2013 15:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/28 13:59:25
06/28/2013 15:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/28 13:59:25
06/28/2013 15:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/06/28
    13:59:24
06/28/2013 15:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/06/28
    13:59:24
06/28/2013 03:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/28
    00:29:18
06/28/2013 03:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/28
    00:23:31
06/28/2013 03:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/28 00:23:31
06/28/2013 03:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/28
    00:23:30
06/28/2013 03:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/28
    00:19:36
06/28/2013 03:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/06/28
    00:11:22
06/28/2013 03:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/28
    00:11:20
06/28/2013 03:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/28 00:11:20
06/27/2013 15:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/27 13:56:06
06/27/2013 15:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/06/27
    13:56:06
06/27/2013 03:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/27
    00:33:47
06/27/2013 03:03 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/27
    00:28:14
06/27/2013 03:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/27
    00:28:13
06/27/2013 03:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/27 00:28:13
06/26/2013 15:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/26 13:55:42
06/26/2013 15:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/26 13:55:42
06/26/2013 15:01 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/06/26
    13:55:42
06/26/2013 15:01 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/06/26
    13:55:42
06/26/2013 03:03 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/26
    01:54:58
06/26/2013 03:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/26
    01:54:57
06/26/2013 03:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/26
    01:49:19
06/26/2013 03:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/26 01:49:19
06/26/2013 03:03 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/26
    01:41:22
06/26/2013 03:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/26 01:37:11
06/26/2013 03:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/26
    01:37:11
06/26/2013 03:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/26
    01:36:24
06/26/2013 03:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/26 01:36:23
06/26/2013 03:03 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/06/26
    01:36:19
06/26/2013 03:03 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/26
    01:30:50
06/26/2013 03:03 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/26 01:30:50
06/26/2013 03:03 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/26 01:29:47
06/26/2013 03:03 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/26
    01:29:47
06/26/2013 03:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/26 01:29:46
06/26/2013 03:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/26
    01:29:46
06/26/2013 03:03 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/26
    01:21:52
06/26/2013 03:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/26 01:21:52
06/26/2013 03:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/26
    01:21:51
06/26/2013 03:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/26 01:21:51
06/26/2013 03:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/26 00:48:02
06/26/2013 03:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/26
    00:48:02
06/26/2013 03:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/26 00:48:01
06/26/2013 03:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/26
    00:48:01
06/26/2013 03:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/26
    00:43:11
06/26/2013 03:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/26 00:43:11
06/26/2013 03:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/26
    00:43:10
06/26/2013 03:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/26 00:43:10
06/26/2013 00:03 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/25 23:50:50
06/26/2013 00:03 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/25
    23:50:50
06/26/2013 00:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/25 23:50:49
06/26/2013 00:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/25
    23:50:49
06/26/2013 00:03 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/25
    23:46:46
06/26/2013 00:03 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/25 23:46:46
06/26/2013 00:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/25
    23:46:45
06/26/2013 00:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/25 23:46:45
06/26/2013 00:03 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/25 22:51:03
06/26/2013 00:03 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/25
    22:51:03
06/26/2013 00:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/25 22:51:02
06/26/2013 00:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/25
    22:51:02
06/26/2013 00:03 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/25
    22:46:58
06/26/2013 00:03 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/25 22:46:58
06/26/2013 00:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/25
    22:46:57
06/26/2013 00:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/25 22:46:57
06/26/2013 00:03 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/25 21:56:51
06/26/2013 00:03 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/25
    21:56:51
06/26/2013 00:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/25 21:53:05
06/26/2013 00:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/25 21:56:51
06/26/2013 00:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/25
    21:56:51
06/26/2013 00:03 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/25
    21:53:06
06/26/2013 00:03 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/25 21:53:06
06/26/2013 00:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/25
    21:53:05
06/25/2013 21:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/25 20:53:25
06/25/2013 21:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/25
    20:53:25
06/25/2013 21:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/25 20:53:25
06/25/2013 21:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/25
    20:53:24
06/25/2013 21:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/25
    20:50:18
06/25/2013 21:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/25 20:50:18
06/25/2013 21:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/25
    20:50:18
06/25/2013 21:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/25 20:50:18
06/25/2013 18:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/25 15:00:01
06/25/2013 18:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/06/25
    15:00:01
06/25/2013 18:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/25 15:00:01
06/25/2013 18:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/06/25
    15:00:01
06/25/2013 15:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/25 14:04:43
06/25/2013 15:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/25 14:04:43
06/25/2013 15:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/06/25
    14:04:42
06/25/2013 15:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/06/25
    14:04:42
06/25/2013 08:22 rclark
    Performed site GMC on 6/25/2013. All transceivers were checked for tune
    and adjusted as needed. 10 sticks were thrown on the A and B gates. A3 and
    A4 read 9 of 10. All otheres read 10 of 10. All sticks were diverted
    properly. Multimon PC1 is 20 seconds and PC2 is 27 seconds behind atomic
    time. Files on PC2 were archived. There are no problems to report.
06/25/2013 06:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/25
    03:30:03
06/25/2013 06:01 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/06/25
    03:23:13
06/25/2013 06:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/25
    03:23:12
06/25/2013 06:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/25 03:23:12
06/25/2013 06:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/25 03:20:12
06/25/2013 06:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/25
    03:20:11
06/25/2013 06:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/25
    03:17:57
06/25/2013 06:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/25 03:17:57
06/25/2013 03:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/25
    02:44:19
06/25/2013 03:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/25
    02:50:23
06/25/2013 03:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/25
    02:44:20
06/25/2013 03:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/25 02:44:19
06/25/2013 03:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/25 02:42:03
06/25/2013 03:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/25
    02:42:02
06/25/2013 03:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/06/25
    02:42:02
06/25/2013 03:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/25
    02:41:12
06/25/2013 03:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/25
    02:41:10
06/25/2013 03:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/25 02:41:10
06/25/2013 03:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/25 02:38:07
06/25/2013 03:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/25
    02:38:07
06/25/2013 03:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/25 02:38:06
06/25/2013 03:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/25
    02:38:06
06/25/2013 03:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/25
    02:33:57
06/25/2013 03:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/25 02:33:57
06/25/2013 03:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/25
    02:33:56
06/25/2013 03:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/25 02:33:56
06/25/2013 03:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/25 01:55:49
06/25/2013 03:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/25
    01:55:49
06/25/2013 03:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/25 01:55:49
06/25/2013 03:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/25
    01:55:49
06/25/2013 03:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/25
    01:51:45
06/25/2013 03:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/25 01:51:45
06/25/2013 03:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/25
    01:51:44
06/25/2013 03:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/25 01:51:44
06/25/2013 03:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/25 00:59:26
06/25/2013 03:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/25
    00:59:26
06/25/2013 03:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/25 00:59:26
06/25/2013 03:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/25
    00:59:26
06/25/2013 03:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/25
    00:55:10
06/25/2013 03:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/25 00:55:10
06/25/2013 03:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/25
    00:55:09
06/25/2013 03:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/25 00:55:09
06/25/2013 03:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/25 00:02:19
06/25/2013 03:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/25
    00:02:19
06/25/2013 03:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/25 00:02:18
06/25/2013 03:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/25
    00:02:18
06/25/2013 00:03 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/24
    23:58:23
06/25/2013 00:03 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/24 23:58:22
06/25/2013 00:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/24
    23:58:21
06/25/2013 00:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/24 23:58:21
06/25/2013 00:03 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/24 22:53:57
06/25/2013 00:03 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/24
    22:53:57
06/25/2013 00:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/24 22:53:56
06/25/2013 00:03 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/24
    22:49:39
06/25/2013 00:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/24
    22:53:56
06/25/2013 00:03 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/24 22:49:39
06/25/2013 00:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/24 22:49:38
06/25/2013 00:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/24
    22:49:38
06/25/2013 00:03 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/24 21:50:41
06/25/2013 00:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/24
    21:50:41
06/25/2013 00:03 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/24 21:54:29
06/25/2013 00:03 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/24
    21:54:29
06/25/2013 00:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/24 21:54:28
06/25/2013 00:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/24
    21:54:28
06/25/2013 00:03 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/24
    21:50:42
06/25/2013 00:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/24 21:50:41
06/24/2013 21:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/24 20:51:49
06/24/2013 21:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/24
    20:51:49
06/24/2013 21:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/24 20:51:48
06/24/2013 21:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/24
    20:51:48
06/24/2013 21:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/24
    20:48:41
06/24/2013 21:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/24 20:48:41
06/24/2013 21:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/24
    20:48:41
06/24/2013 21:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/24 20:48:41
06/24/2013 15:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/24 13:57:32
06/24/2013 15:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/24 13:57:32
06/24/2013 15:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/06/24
    13:57:31
06/24/2013 15:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/06/24
    13:57:31
06/24/2013 03:01 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/06/24
    00:49:17
06/24/2013 03:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/24
    00:49:16
06/24/2013 03:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/24
    00:40:14
06/24/2013 03:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/24 00:40:14
06/24/2013 03:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/24 00:32:15
06/24/2013 03:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/24
    00:32:15
06/24/2013 03:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/24
    00:28:38
06/24/2013 03:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/24 00:28:38
06/24/2013 00:27 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/23 23:57:26
06/24/2013 00:27 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/23
    23:57:26
06/24/2013 00:27 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/23
    23:54:47
06/24/2013 00:27 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/23 23:54:47
06/24/2013 00:26 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/23
    23:10:00
06/24/2013 00:26 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/23
    23:09:59
06/24/2013 00:26 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/23
    23:01:18
06/24/2013 00:26 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/23 23:01:18
06/24/2013 00:26 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/23 22:52:44
06/24/2013 00:26 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/23
    22:52:44
06/24/2013 00:26 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/23 22:52:43
06/24/2013 00:26 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/23
    22:52:43
06/24/2013 00:26 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/23
    22:48:45
06/24/2013 00:26 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/23 22:48:45
06/24/2013 00:26 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/23
    22:48:44
06/24/2013 00:26 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/23 22:48:44
06/24/2013 00:26 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/23 21:45:29
06/24/2013 00:26 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/23 21:49:43
06/24/2013 00:26 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/23
    21:49:43
06/24/2013 00:26 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/23 21:49:42
06/24/2013 00:26 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/23
    21:49:42
06/24/2013 00:26 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/23
    21:45:30
06/24/2013 00:26 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/23 21:45:29
06/24/2013 00:26 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/23
    21:45:29
06/23/2013 21:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/23 20:58:00
06/23/2013 21:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/23
    20:58:00
06/23/2013 21:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/23 20:57:59
06/23/2013 21:01 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/23
    20:57:59
06/23/2013 21:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/23
    20:44:52
06/23/2013 21:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/23 20:44:52
06/23/2013 21:01 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/23
    20:44:51
06/23/2013 21:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/23 20:44:51
06/23/2013 21:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/23 19:52:46
06/23/2013 21:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/23
    19:52:45
06/23/2013 21:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/23 19:52:45
06/23/2013 21:01 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/23
    19:52:45
06/23/2013 21:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/23
    19:50:25
06/23/2013 21:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/23 19:50:24
06/23/2013 21:01 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/23
    19:50:24
06/23/2013 21:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/23 19:50:24
06/23/2013 18:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/23 17:53:52
06/23/2013 18:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/23
    17:53:52
06/23/2013 18:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/23 17:53:52
06/23/2013 18:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/23
    17:53:52
06/23/2013 18:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/23
    17:50:31
06/23/2013 18:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/23 17:50:31
06/23/2013 18:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/23
    17:50:30
06/23/2013 18:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/23 17:50:30
06/23/2013 15:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/23 13:56:23
06/23/2013 15:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/23 13:56:23
06/23/2013 15:01 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/06/23
    13:56:22
06/23/2013 15:01 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/06/23
    13:56:22
06/22/2013 21:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/22
    19:46:38
06/22/2013 21:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/22
    19:38:42
06/22/2013 21:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/22 19:38:42
06/22/2013 21:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/22 19:32:50
06/22/2013 21:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/22
    19:32:50
06/22/2013 21:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/22
    19:29:49
06/22/2013 21:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/22 19:29:49
06/22/2013 21:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/22 19:16:18
06/22/2013 21:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/22
    19:16:18
06/22/2013 21:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/06/22
    19:14:18
06/22/2013 21:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/22
    19:14:15
06/22/2013 21:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/22 19:14:15
06/22/2013 21:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/22 19:11:35
06/22/2013 21:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/22
    19:11:34
06/22/2013 21:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/22
    19:10:01
06/22/2013 21:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/22 19:10:01
06/22/2013 21:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/22 18:44:28
06/22/2013 21:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/22
    18:44:28
06/22/2013 21:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/22
    18:42:51
06/22/2013 21:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/22 18:42:51
06/22/2013 21:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/22 18:28:54
06/22/2013 21:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/22
    18:28:54
06/22/2013 21:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/22
    18:27:47
06/22/2013 21:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/22 18:27:47
06/22/2013 18:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/22 17:57:12
06/22/2013 18:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/22
    17:57:12
06/22/2013 18:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/22
    17:54:20
06/22/2013 18:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/22 17:54:20
06/22/2013 18:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/22 17:29:23
06/22/2013 18:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/22
    17:29:23
06/22/2013 18:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/22
    17:26:18
06/22/2013 18:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/22 17:26:18
06/22/2013 18:01 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/22
    16:17:06
06/22/2013 18:01 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/22
    16:11:48
06/22/2013 18:01 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/22
    16:11:47
06/22/2013 18:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/22 16:11:47
06/22/2013 15:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/22 13:58:34
06/22/2013 15:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/22 13:58:34
06/22/2013 15:01 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/06/22
    13:58:28
06/22/2013 15:01 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/06/22
    13:58:28
06/22/2013 00:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/21
    22:29:31
06/22/2013 00:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/06/21
    22:29:31
06/22/2013 00:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/21
    22:29:28
06/22/2013 00:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/21
    22:29:28
06/22/2013 00:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/21
    22:13:30
06/22/2013 00:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/21
    22:13:30
06/22/2013 00:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/21 22:13:30
06/22/2013 00:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/21 22:13:30
06/22/2013 00:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/21 22:10:41
06/22/2013 00:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/21 22:10:41
06/22/2013 00:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/21
    22:10:41
06/22/2013 00:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/21
    22:10:41
06/22/2013 00:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/21
    22:03:46
06/22/2013 00:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/21 22:03:46
06/22/2013 00:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/21
    22:03:45
06/22/2013 00:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/21 22:03:45
06/22/2013 00:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/21 22:02:19
06/22/2013 00:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/21
    22:02:18
06/22/2013 00:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/21
    21:59:17
06/22/2013 00:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/21 21:59:17
06/22/2013 00:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/21 21:39:33
06/22/2013 00:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/21 21:39:33
06/22/2013 00:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/21
    21:39:32
06/22/2013 00:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/21
    21:39:32
06/22/2013 00:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/21
    21:35:40
06/22/2013 00:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/21 21:35:40
06/22/2013 00:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/21
    21:35:39
06/22/2013 00:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/21 21:35:39
06/22/2013 00:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/21 20:48:34
06/22/2013 00:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/21 20:48:34
06/22/2013 00:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/21
    20:48:34
06/22/2013 00:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/21
    20:48:33
06/22/2013 00:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/21
    20:44:47
06/22/2013 00:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/21 20:44:47
06/22/2013 00:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/21
    20:44:46
06/22/2013 00:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/21 20:44:46
06/21/2013 15:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/21 14:03:23
06/21/2013 15:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/21 14:03:23
06/21/2013 15:01 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/06/21
    14:03:21
06/21/2013 15:01 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/06/21
    14:03:21
06/21/2013 03:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/06/21
    00:21:38
06/21/2013 03:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/21
    00:21:37
06/21/2013 03:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/21
    00:12:12
06/21/2013 03:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/21 00:12:12
06/21/2013 03:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/21
    00:07:11
06/21/2013 03:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/21
    00:07:09
06/21/2013 03:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/21
    00:00:46
06/21/2013 03:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/21 00:00:45
06/21/2013 00:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/20 23:58:40
06/21/2013 00:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/20 23:58:39
06/21/2013 00:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/20 23:53:33
06/21/2013 00:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/20 23:53:32
06/21/2013 00:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/20 22:55:21
06/21/2013 00:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/20
    22:55:21
06/21/2013 00:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/20 22:55:20
06/21/2013 00:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/20
    22:55:20
06/21/2013 00:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/20
    22:50:53
06/21/2013 00:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/20
    22:50:52
06/21/2013 00:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/20 22:50:53
06/21/2013 00:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/20 22:50:52
06/21/2013 00:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/20 22:04:08
06/21/2013 00:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/20
    22:04:08
06/21/2013 00:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/20
    22:01:46
06/21/2013 00:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/20 22:01:46
06/20/2013 15:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/20 13:55:34
06/20/2013 15:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/20 13:55:34
06/20/2013 15:01 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/06/20
    13:55:30
06/20/2013 15:01 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/06/20
    13:55:30
06/20/2013 06:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/20
    05:05:24
06/20/2013 06:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/06/20
    04:59:34
06/20/2013 06:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/20
    04:59:34
06/20/2013 03:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/20
    02:59:27
06/20/2013 03:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/20
    02:30:43
06/20/2013 03:01 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/20
    01:46:35
06/20/2013 03:01 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/20
    01:46:33
06/20/2013 03:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/20 01:36:37
06/20/2013 03:01 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/20
    01:36:37
06/20/2013 03:01 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/20
    00:56:06
06/20/2013 03:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/20 01:03:02
06/20/2013 03:01 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/20
    01:03:02
06/20/2013 03:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/20 00:56:05
06/19/2013 15:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/19 13:57:55
06/19/2013 15:01 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/06/19
    13:57:54
06/19/2013 15:01 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/06/19
    13:57:54
06/19/2013 06:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/06/19
    05:09:44
06/19/2013 06:01 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/06/19
    05:04:34
06/19/2013 06:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/06/19
    05:04:33
06/19/2013 03:01 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/19
    01:52:38
06/19/2013 03:01 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/19
    01:43:27
06/19/2013 03:01 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/19
    01:40:21
06/19/2013 03:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/19 01:40:21
06/19/2013 03:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/19 00:53:26
06/19/2013 03:01 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/19
    00:53:26
06/19/2013 03:01 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/19
    00:50:12
06/19/2013 03:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/19 00:50:12
06/19/2013 03:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/19 00:31:23
06/19/2013 03:01 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/19
    00:31:23
06/19/2013 03:01 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/19
    00:29:17
06/19/2013 03:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/19 00:29:17
06/18/2013 08:32 rclark
    Performed site GMC on 6/18/2013. All transceivers were checked for tune
    and adjusted as needed. 10 sticks were thrown at the A and B gates. All
    sticks were read on all coils and diverted properly. Multimon PC1 was 47
    seconds and PC2 was 56 seconds behind atomic time. Adjusted cloclks to
    within 1 second of atomic time and each other. LMJ13169.206 was submitted
    as a gap file. Files on PC2 were archived. There are no problems to
    report.
06/18/2013 06:06 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/18
    03:50:11
06/18/2013 06:06 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/18 03:54:53
06/18/2013 06:06 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/18
    03:54:53
06/18/2013 06:06 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/18 03:50:11
06/17/2013 15:07 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/06/17
    14:48:10
06/17/2013 15:07 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/06/17
    14:48:10
06/17/2013 15:07 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/17
    14:09:21
06/17/2013 15:07 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/17 14:00:33
06/17/2013 15:07 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/17 13:56:43
06/17/2013 15:07 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/06/17
    13:56:42
06/17/2013 15:07 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/06/17 13:56:41
06/17/2013 15:07 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/06/17
    13:35:58
06/17/2013 15:07 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/06/17
    13:35:58
06/17/2013 15:07 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/06/17 13:35:55
06/17/2013 15:07 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/17 13:35:55
06/17/2013 09:07 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/17
    08:13:30
06/17/2013 09:07 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/17
    08:08:10
06/17/2013 09:07 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/17
    08:08:11
06/17/2013 09:07 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/17 08:08:10
06/17/2013 06:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/17 03:53:43
06/17/2013 06:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/17
    03:53:43
06/17/2013 06:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/17
    03:50:20
06/17/2013 06:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/17 03:50:20
06/17/2013 03:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/17 02:52:14
06/17/2013 03:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/17
    02:52:14
06/17/2013 03:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/17
    02:49:07
06/17/2013 03:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/17 02:49:07
06/17/2013 03:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/17 01:52:52
06/17/2013 03:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/17
    01:52:52
06/17/2013 03:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/17
    01:50:11
06/17/2013 03:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/17 01:50:11
06/17/2013 00:08 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/16
    23:55:07
06/17/2013 00:08 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/16 23:58:07
06/17/2013 00:08 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/16
    23:58:07
06/17/2013 00:08 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/16 23:55:07
06/16/2013 15:05 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/16 13:56:17
06/16/2013 15:05 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/06/16
    13:56:16
06/16/2013 08:26 dchase
    User: dchase. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Clearing TASS.
    Error:
    22: Test Tag Failed.
06/15/2013 18:06 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/15
    17:41:31
06/15/2013 18:06 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/15
    17:41:30
06/15/2013 18:06 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/15
    17:35:52
06/15/2013 18:06 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/15 17:35:52
06/15/2013 15:01 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/06/15
    13:55:38
06/15/2013 15:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/15 13:55:37
06/15/2013 03:22 darren@b
    22:TestTagFailure,81:ReaderReset,82:InputSyncDetect,82:InputSyncLost:
    Alarms will be investigated during the next site visit.
06/15/2013 00:07 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/14
    21:31:32
06/15/2013 00:07 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/14
    21:36:52
06/15/2013 00:07 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/14
    21:36:49
06/15/2013 00:07 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/14 21:31:32
06/14/2013 21:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/14 20:55:27
06/14/2013 21:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/14
    20:55:27
06/14/2013 21:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/14
    20:50:29
06/14/2013 21:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/14 20:50:29
06/14/2013 21:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/14 19:49:51
06/14/2013 21:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/14
    19:49:51
06/14/2013 21:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/14
    19:47:40
06/14/2013 21:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/14 19:47:40
06/14/2013 21:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/14 19:02:32
06/14/2013 21:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/14
    19:02:32
06/14/2013 21:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/14
    19:00:35
06/14/2013 21:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/14 19:00:35
06/14/2013 18:05 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/14 17:53:28
06/14/2013 18:05 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/14
    17:53:28
06/14/2013 18:05 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/14
    17:51:59
06/14/2013 18:05 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/14 17:51:59
06/14/2013 18:05 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/14 17:04:53
06/14/2013 18:05 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/14
    17:04:53
06/14/2013 18:05 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/14
    17:03:28
06/14/2013 18:05 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/14 17:03:28
06/14/2013 15:05 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/14 13:56:07
06/14/2013 15:05 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/06/14
    13:56:06
06/14/2013 06:44 darren@b
    62:InputSyncDetect,62:ReaderReset:  Alarm generated by a random reader
    reset.
06/14/2013 03:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/14
    00:01:10
06/14/2013 03:04 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/14
    00:01:09
06/14/2013 00:10 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/13
    23:58:58
06/14/2013 00:10 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/13 23:58:58
06/14/2013 00:10 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/13 23:53:28
06/14/2013 00:10 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/13
    23:53:28
06/14/2013 00:10 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/13
    23:50:19
06/14/2013 00:10 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/13 23:50:19
06/14/2013 00:10 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/13 23:34:43
06/14/2013 00:10 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/13
    23:34:42
06/14/2013 00:10 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/13
    23:31:26
06/14/2013 00:10 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/13 23:31:26
06/14/2013 00:10 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/13
    22:56:19
06/14/2013 00:10 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/13 22:59:32
06/14/2013 00:10 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/13
    22:59:31
06/14/2013 00:10 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/13 22:56:19
06/14/2013 00:10 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/13 21:57:37
06/14/2013 00:10 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/13
    21:57:37
06/14/2013 00:10 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/13
    21:54:34
06/14/2013 00:10 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/13 21:54:34
06/13/2013 21:07 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/13 20:59:29
06/13/2013 21:07 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/13
    20:59:29
06/13/2013 21:07 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/13
    20:53:07
06/13/2013 21:07 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/13 20:53:07
06/13/2013 15:09 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/06/13
    13:58:21
06/13/2013 15:09 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/13 13:58:20
06/13/2013 08:06 dlwarf
    User: dlwarf. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Site will be tuned
    next week.. Error:
    A3: Analog comm.
    A3: Exc. Power low.
06/13/2013 06:05 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/13
    03:03:36
06/12/2013 15:04 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/06/12
    13:58:02
06/12/2013 06:14 darren@b
    81:ReaderReset,82:InputSyncDetect,82:InputSyncLost: Alarms generated by a
    reader reset. not an uncommon occurrence on these transceivers.
06/11/2013 21:04 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/11
    19:28:03
06/11/2013 21:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/11
    19:27:55
06/11/2013 21:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/11
    19:20:32
06/11/2013 21:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/11
    18:49:59
06/11/2013 21:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/11
    18:47:04
06/11/2013 15:04 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/06/11
    13:58:37
06/11/2013 10:38 rclark
    Performed site GMC on 6/11/2013. All transceivers were checked for tune
    and adjusted as needed. 10 sticks were thrown on the A and B gates. All
    sticks werre read on all coils with the exception of B3 and B4 which read
    9 of 10. All sticks were diverted properly. Multimon PC1 is 32 seconds and
    PC2 was 50 seconds behind atomic time. Adjusted the PC2 clock within 1
    second of PC1. Files on PC2 were archived. There are no problems to
    report.
06/10/2013 18:03 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/10
    16:26:48
06/10/2013 15:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/06/10
    14:00:08
06/09/2013 18:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/09
    15:21:44
06/09/2013 18:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/09
    15:16:37
06/09/2013 18:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/09 15:16:37
06/09/2013 18:03 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/09
    15:16:36
06/09/2013 15:04 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/06/09
    14:50:41
06/09/2013 15:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/09 14:50:40
06/09/2013 15:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/09
    14:50:40
06/09/2013 15:04 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/09
    14:49:59
06/09/2013 15:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/09
    14:46:27
06/09/2013 15:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/09 14:46:27
06/09/2013 15:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/09 13:59:13
06/09/2013 15:03 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/06/09
    13:59:12
06/09/2013 07:20 rclark
    User: rclark. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Noted.. Error:
    A3: Analog comm.
    A3: Exc. Power low.
06/09/2013 00:06 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/08 21:00:37
06/09/2013 00:06 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/08
    21:11:57
06/09/2013 00:06 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/08 21:11:55
06/09/2013 00:06 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/08 21:03:59
06/09/2013 00:06 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/08
    21:03:59
06/09/2013 00:06 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/08
    21:00:37
06/08/2013 21:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/08 19:56:08
06/08/2013 21:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/08
    19:56:08
06/08/2013 21:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/08
    19:52:45
06/08/2013 21:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/08 19:52:45
06/08/2013 21:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/08 19:01:02
06/08/2013 21:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/08
    19:01:02
06/08/2013 21:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/08
    18:58:49
06/08/2013 21:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/08 18:58:49
06/08/2013 21:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/08 18:09:28
06/08/2013 21:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/08
    18:09:28
06/08/2013 18:06 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/08
    17:50:21
06/08/2013 18:06 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/08 17:50:20
06/08/2013 18:06 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/08 17:03:45
06/08/2013 18:06 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/08
    17:03:45
06/08/2013 18:06 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/08
    17:02:37
06/08/2013 18:06 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/08 17:02:37
06/08/2013 15:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/08 13:59:20
06/08/2013 15:04 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/06/08
    13:59:19
06/08/2013 03:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/08 00:00:04
06/08/2013 03:01 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/08
    00:00:03
06/08/2013 00:05 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/07 23:59:19
06/08/2013 00:05 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/06/07
    23:59:19
06/08/2013 00:05 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/06/07
    23:58:09
06/08/2013 00:05 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/07 23:58:09
06/07/2013 15:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/06/07
    13:58:00
06/07/2013 15:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/07 13:58:00
06/07/2013 07:04 scottl
    User: scottl. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: No comments. Error:
    A3: Analog comm.
    A3: Exc. Power low.
06/07/2013 03:01 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/07
    02:09:23
06/07/2013 03:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/07 02:09:22
06/06/2013 15:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/06 14:00:09
06/06/2013 15:04 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/06/06
    14:00:08
06/06/2013 03:04 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/06
    02:08:16
06/06/2013 03:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/06 02:08:15
06/05/2013 15:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/05 14:03:14
06/05/2013 15:03 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/06/05
    14:03:13
06/05/2013 09:04 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/05
    07:52:58
06/05/2013 09:04 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/06/05
    07:49:15
06/05/2013 08:12 rclark
    Performed site GMC on 6/5/2013. All transceivers were checked for tune and
    adjusted as needed. Multimon PC1 is 20 seconds and PC2 is 28 seconds
    behind atomic time. Files on PC2 were archived. There are no problems to
    report.
06/05/2013 06:07 rclark
    User: rclark. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: This will be
    checked during today's site visit.. Error:
    A3: Analog comm.
    A3: Exc. Power low.
06/05/2013 00:18 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/04
    22:44:25
06/05/2013 00:18 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/04 22:44:25
06/04/2013 15:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/04 14:01:21
06/04/2013 15:01 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/06/04
    14:01:19
06/04/2013 14:32 thumphre
    A Gate GMC was performed. Tuning and timing was testeded. 30 sticks were
    thrown on A gate, and 25 sticks on B gate. The average C2C times were
    recorded for historical purposes. The stick tag test resulted in all
    sticks being diverted properly. One timing adjustments was made; it was
    found that the tert t/o time on B gate was way off, set at 31. This was
    set back to 6. It was causing the gate to bang open if a second fish was
    seen while the gate was 3/4 of the way open or more.

    A1-A3 29 of 30
    A4 30 of 30
    31-33 30 of 30
    B1-B3 25 of 25
    B4 24 of 25
    41-43 25 of 25
06/04/2013 03:03 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/04
    01:16:07
06/04/2013 03:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/04 01:16:05
06/02/2013 15:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/06/02 13:55:03
06/02/2013 15:04 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/06/02
    13:55:02
06/02/2013 10:10 alan@bay
    13:InputSyncDetect,13:ReaderReset:         Cleared on New TASS
06/02/2013 06:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/02
    03:02:43
06/02/2013 06:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/02 03:02:42
06/01/2013 07:01 Alan
    Located LMJ13151.107 in the archive folder, moved it to PC1data and re-
    submitted it.
06/01/2013 06:58 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/05/31 18:00:01
06/01/2013 06:58 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/05/31
    18:00:01
06/01/2013 03:04 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/06/01
    00:58:33
06/01/2013 03:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/06/01 00:58:31
05/31/2013 15:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/05/31 13:56:28
05/30/2013 18:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/05/30 15:19:09
05/30/2013 15:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/05/30 14:00:47
05/29/2013 15:01 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/05/29
    14:02:08
05/28/2013 12:29 Darren
    A site GMC was performed today (5-28-13). All transceivers were checked
    and adjusted for tuning and noise. The Multimon PC clocks were over
    1minute behind atomic time and were adjusted to within 1 seconds of atomic
    time. The gap file lmj13148.206 was uploaded. 10 sticks were passed
    through both the A and B separator montiors with 100% detection and
    diversion. No problems were discovered during this visit.
05/27/2013 15:03 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/05/27
    14:05:00
05/27/2013 03:06 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/05/27
    01:08:57
05/27/2013 03:06 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/05/27
    01:03:20
05/27/2013 03:06 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/05/27
    01:03:18
05/27/2013 00:26 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/05/26
    23:58:50
05/27/2013 00:26 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/05/26
    23:55:41
05/26/2013 15:06 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/05/26
    14:00:38
05/26/2013 15:06 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/05/26
    14:00:38
05/22/2013 06:53 Alan
    User: Alan. Site: LMJ. Antenna Group Name: FULL FLOW BYPASS. Antenna: 01.
    Comments: Addressed during yesterday's GMC. Error:
    01: Noise Level High.
05/21/2013 10:40 thumphre
    At the site to check the gates. Talked to the sep op to see if anything
    changed around noon yesterday as the efficiency has been good since then.
    No known change. Checked the timing on the gates, slightly adjusted the
    additional time on B4 from 55 to 57.

    Stick tag results:
    A1 20 of 20
    A2 20 of 20
    A3 20 of 20
    A4 20 of 20

    B1 20 of 20
    B2 20 of 20
    B3 19 of 20
    B4 19 of 20

    41  20 of 20
    42 20 of 20
    43 20 of 20

    31 20 of 20
    32 20 of 20
    33 20 of 20

    No problems to report.
05/21/2013 08:44 Roger
    Performed site GMC on 5/21/2013. All transceivers were checked for tune
    and adjusted as needed. Threw 10 sticks at the A and B gated. Sticks were
    read on all coils and diverted properly. Multimon PC1 is 31 seconds and
    PC2 is 45 seconds behind atomic time. Files on PC2 were archived. There
    are no problems to report.
05/21/2013 07:18 Troy@bay
    03:InputSyncDetect,03:InputSyncLost,04:InputSyncDetect,04:InputSyncLost:
    Cleared on new TASS.
05/21/2013 07:18 thumphre
    User: thumphrey. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: PSMFC is in the
    process of tracking down the noise at this site.. Error:
    01: Noise Level High.
    02: Reader Set To Master.
    02: Sync. Input Not Present.
    02: Noise Level High.
05/16/2013 13:55 rclark
    User: rclark. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Electricians were
    working on the outdoor lighting during this period.. Error:
    01: Noise Level High.
    02: Noise Level High.
    02: Virtual Tag Test Failed.
05/15/2013 06:39 rclark
    User: rclark. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Transceiver was
    retuned on 5/14/2013.. Error:
    01: Noise Level High.
05/14/2013 10:42 Roger
    Performed site GMC on 5/14/2013. All transceivers were checked for tune
    and adjusted as needed. 10 sticks were thrown on the A and B gates. Coil
    A4 read 9 of 10. All other coils read all sticks. All sticks were diverted
    properly. Multimon PC1 is 16 seconds and PC2 is 23 seconds behind atomic
    time. Files on PC2 were archived. There are no problems to report.
05/14/2013 06:19 rclark@b
    81:ReaderReset,82:InputSyncDetect,82:InputSyncLost:    Random reader
    reset.
05/13/2013 06:11 rclark
    User: rclark. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: No comments. Error:
    01: Virtual Tag Test Failed.
    01: Memory Low.
    02: Memory Low.
05/09/2013 06:20 scottl
    User: scottl. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: No comments. Error:
    A3: Analog comm.
    A3: Exc. Power low.
05/08/2013 10:01 Troy
    At the site for B Gate as it was low in efficiency this am. Had the
    separator operator adjust the flow on B side as it was lower than normal.
    Adjusted the gate times accordingly. Watched several fish divert along
    with throwing 75 sticks on B gate. A gate was checked with 15 sticks and
    was working well. Below are the PLC times.

    A Gate
    Delay Op     5
    Travel Open  26
    Time Open    102
    Travel Close 20
    Sec T/O      18
    Tert T/O     11
    Quat T/O     4
    A1 to A4  80
    A2 to A4 55
    A3 to A4 31
    Added Delay 45

    B Gate
    Delay Op     3
    Travel Open  27
    Time Open    100
    Travel Close 20
    Sec T/O      19
    Tert T/O     14
    Quat T/O     3
    B1 to B4 76
    B2 to B4 55 - 58
    B3 to B4 27
    Added Delay 45 - 55
05/08/2013 07:08 scottl
    User: scottl. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: No comments. Error:
    A3: Analog comm.
    A3: Exc. Power low.
05/08/2013 06:08 Roger
    Manually pushed files for Multimon PC1.
05/07/2013 08:43 Roger
    Performed site GMC on 5/7/2013. All transceivers were checked for tune and
    adjusted as needed. 10 sticks were thrown on the A and B gates. All sticks
    were read on all coils, except for 32, which read 9 of 10. All sticks were
    diverted properly. Multimon PC1 was 31 seconds and PC2 was 46 seconds
    behind atomic time. Set clocks to within 1 second of atomic time and each
    other. LMJ13127.206 was submitted as a gap file. Files on PC2 were
    archived. There are no problems to report.
05/07/2013 06:06 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/05/07 05:57:13
05/07/2013 06:06 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/05/07
    05:53:29
05/07/2013 06:06 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/05/07
    05:53:29
05/06/2013 06:18 scottl
    User: scottl. Site: LMJ. Antenna Group Name: FULL FLOW BYPASS. Antenna:
    02. Comments: Noted. Error: 02: Memory Low
05/06/2013 06:18 scottl
    User: scottl. Site: LMJ. Antenna Group Name: FULL FLOW BYPASS. Antenna:
    01. Comments: Noted. Error: 01: Memory Low
05/05/2013 07:30 dchase
    User: dchase. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Clearing TASS.
    Memory alarms will be cleared during the next site visit.. Error:
    01: Memory Low.
    02: Memory Low.
05/04/2013 09:07 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/05/04 06:35:05
05/04/2013 09:07 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/05/04
    06:29:48
05/04/2013 09:07 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/05/04
    06:29:48
05/04/2013 09:07 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/05/04
    06:25:21
05/04/2013 09:07 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/05/04
    06:25:21
05/04/2013 09:07 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/05/04 06:25:21
05/04/2013 09:07 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/05/04 06:25:21
05/04/2013 09:07 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/05/04 06:16:40
05/04/2013 09:07 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/05/04 06:16:40
05/04/2013 09:07 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/05/04
    06:16:40
05/04/2013 09:07 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/05/04
    06:16:40
05/04/2013 09:07 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/05/04
    06:13:00
05/04/2013 09:07 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/05/04
    06:13:00
05/04/2013 09:07 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/05/04 06:13:00
05/04/2013 09:07 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/05/04 06:13:00
05/04/2013 07:34 dchase
    User: dchase. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Clearing TASS..
    Error:
    01: Noise Level High.
    01: Memory Low.
    02: Memory Low.
05/04/2013 06:07 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/05/04 05:58:02
05/04/2013 06:07 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/05/04 05:39:27
05/04/2013 06:07 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/05/04 05:39:27
05/04/2013 06:07 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/05/04
    05:39:27
05/04/2013 06:07 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/05/04
    05:39:27
05/04/2013 06:07 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/05/04
    05:39:26
05/04/2013 06:07 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/05/04
    05:39:26
05/01/2013 12:47 Darren
    A site GMC was performed today 5-1-13. All transceivers were checked for
    tuning and noise, the full flow systems were checked for detectability,
    and were adjusted as necessary. Although no water over the separator the
    flume levels were pretty close to operational levels so sticks were passed
    through the monitors. All sticks were detected and diverted properly. the
    PC clocks are within 10 seconds of each other and atomic time. No problems
    were discovered during this visit.
05/01/2013 09:01 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/05/01 06:40:45
05/01/2013 09:01 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/05/01
    06:34:33
05/01/2013 09:01 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/05/01
    06:34:33
05/01/2013 09:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/05/01
    06:34:32
05/01/2013 09:01 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/05/01
    06:34:32
05/01/2013 09:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/05/01 06:34:32
05/01/2013 09:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/05/01 06:34:32
05/01/2013 07:03 dchase
    User: dchase. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Alarms will be
    investigated during the next site GMC.. Error:
    01: Noise Level High.
    02: Noise Level High.
    02: Virtual Tag Test Failed.
05/01/2013 06:09 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/05/01 05:59:42
05/01/2013 06:09 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/05/01 05:55:41
05/01/2013 06:09 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/05/01 05:55:41
05/01/2013 06:09 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/05/01
    05:55:41
05/01/2013 06:09 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/05/01
    05:55:41
05/01/2013 06:09 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/05/01
    05:55:40
05/01/2013 06:09 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/05/01
    05:55:40
04/28/2013 12:04 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/04/28 09:54:05
04/28/2013 12:04 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/04/28
    09:45:22
04/28/2013 12:04 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/04/28
    09:45:22
04/28/2013 12:04 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/04/28
    09:45:21
04/28/2013 12:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/04/28
    09:45:21
04/28/2013 12:04 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/04/28 09:45:21
04/28/2013 12:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/04/28 09:45:21
04/28/2013 06:05 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/04/28 05:59:54
04/28/2013 06:05 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/04/28 05:54:21
04/28/2013 06:05 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/04/28 05:54:21
04/28/2013 06:05 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/04/28
    05:54:21
04/28/2013 06:05 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/04/28
    05:54:21
04/28/2013 06:05 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/04/28
    05:54:20
04/28/2013 06:05 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/04/28
    05:54:20
04/25/2013 12:04 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/04/25 10:05:11
04/25/2013 12:04 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/04/25
    09:59:59
04/25/2013 12:04 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/04/25
    09:59:59
04/25/2013 12:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/04/25
    09:59:58
04/25/2013 12:04 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/04/25
    09:59:58
04/25/2013 12:04 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/04/25 09:59:58
04/25/2013 12:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/04/25 09:59:58
04/25/2013 09:06 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/04/25 06:00:06
04/25/2013 06:06 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/04/25
    05:26:57
04/25/2013 06:06 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/04/25
    05:26:56
04/25/2013 06:06 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/04/25
    05:26:55
04/25/2013 06:06 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/04/25 05:26:55
04/25/2013 06:06 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/04/25 05:26:55
04/25/2013 06:06 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/04/25
    05:26:55
04/23/2013 09:31 Roger
    Performed site GMC on 4/23/2013. All transceivers were checked for tune
    and adjusted as needed. 10 sticks were thrown at the A and B gates. All
    sticks read read on all coils and diverted properly. PC1 was 51 seconds
    and PC2 was 60 seconds behind atomic time. Set the clocks to within 1
    second of atomic time. LMJ13113.207 was submitted as a gap file. There are
    no problems to report.
04/23/2013 09:09 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/04/23
    08:41:53
04/23/2013 09:09 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/04/23
    08:41:53
04/23/2013 09:09 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/04/23 08:41:53
04/23/2013 09:09 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/04/23 08:41:53
04/23/2013 09:09 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/04/23
    08:41:51
04/23/2013 09:09 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/04/23
    08:41:51
04/23/2013 09:09 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/04/23
    08:37:52
04/23/2013 09:09 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/04/23
    08:37:52
04/23/2013 09:09 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/04/23 08:37:51
04/23/2013 09:09 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/04/23 08:37:50
04/23/2013 09:09 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/04/23
    08:37:50
04/23/2013 09:09 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/04/23
    08:37:50
04/22/2013 09:08 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/04/22 07:28:20
04/22/2013 09:08 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/04/22
    07:23:09
04/22/2013 09:08 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/04/22
    07:23:09
04/22/2013 09:08 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/04/22
    07:23:06
04/22/2013 09:08 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/04/22
    07:23:06
04/22/2013 09:08 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/04/22 07:23:06
04/22/2013 09:08 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/04/22 07:23:06
04/22/2013 06:37 thumphre
    User: thumphrey. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Noted. Error:
    01: Noise Level High.
04/22/2013 06:07 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/04/22 05:58:15
04/22/2013 06:07 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/04/22
    05:52:22
04/22/2013 06:07 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/04/22
    05:52:22
04/22/2013 06:07 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/04/22 05:52:21
04/22/2013 06:07 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/04/22 05:52:21
04/22/2013 06:07 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/04/22
    05:52:21
04/22/2013 06:07 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/04/22
    05:52:21
04/19/2013 12:05 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/04/19 10:00:37
04/19/2013 12:05 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/04/19
    09:59:48
04/19/2013 12:05 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/04/19
    09:59:48
04/19/2013 12:05 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/04/19
    09:59:46
04/19/2013 12:05 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/04/19
    09:59:46
04/19/2013 12:05 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/04/19 09:59:46
04/19/2013 12:05 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/04/19 09:59:46
04/19/2013 06:05 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/04/19
    05:43:38
04/19/2013 06:05 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/04/19 05:58:22
04/19/2013 06:05 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/04/19
    05:43:38
04/19/2013 06:05 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/04/19 05:43:37
04/19/2013 06:05 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/04/19 05:43:37
04/19/2013 06:05 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/04/19
    05:43:37
04/19/2013 06:05 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/04/19
    05:43:37
04/16/2013 12:05 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/04/16 10:07:19
04/16/2013 12:05 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/04/16
    09:58:30
04/16/2013 12:05 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/04/16
    09:58:30
04/16/2013 12:05 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/04/16
    09:58:27
04/16/2013 12:05 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/04/16
    09:58:27
04/16/2013 12:05 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/04/16 09:58:27
04/16/2013 12:05 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/04/16 09:58:27
04/16/2013 09:07 Roger
    Performed site GMC on 4/16/2013. All transceivers were checked for tune
    and adjusted as needed. 10 sticks were thrown on the A and B gates. All
    sticks were read on all coils and diverted properly. PC1 is 34 seconds and
    PC2 was 51 seconds behind atomic time. PC2 was adjusted to within 1 second
    of PC1. Files on PC2 were archived. There are no problems to report.
04/16/2013 06:04 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/04/16 05:58:27
04/16/2013 06:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/04/16 05:45:44
04/16/2013 06:04 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/04/16 05:45:44
04/16/2013 06:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/04/16
    05:45:43
04/16/2013 06:04 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/04/16
    05:45:43
04/16/2013 06:04 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/04/16
    05:45:41
04/16/2013 06:04 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/04/16
    05:45:41
04/14/2013 21:05 DGE_Robo
    AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/04/14 20:00:31
04/14/2013 21:05 DGE_Robo
    AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/04/14 19:58:31
04/14/2013 08:23 dchase
    User: dchase. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Older alarms.
    Clearing Tass. Error:
    42: Analog comm.
    42: Exc. Power lowý.
    22: Test Tag Failed.
04/13/2013 09:04 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/04/13 07:23:42
04/13/2013 09:04 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/04/13
    07:12:36
04/13/2013 09:04 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/04/13
    07:12:36
04/13/2013 09:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/04/13
    07:12:36
04/13/2013 09:04 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/04/13
    07:12:36
04/13/2013 09:04 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/04/13 07:12:36
04/13/2013 09:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/04/13 07:12:36
04/13/2013 06:04 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/04/13 05:55:31
04/13/2013 06:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/04/13 05:19:34
04/13/2013 06:04 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/04/13 05:19:34
04/13/2013 06:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/04/13
    05:19:34
04/13/2013 06:04 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/04/13
    05:19:34
04/13/2013 06:04 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/04/13
    05:19:33
04/13/2013 06:04 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/04/13
    05:19:33
04/12/2013 07:53 dlwarf
    User: dlwarf. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Noise due to
    maintenance. Error:
    01: Noise Level High.
04/11/2013 14:34 Alan
    No detections occurred on the secondary M4 PC during the one minute file
    gap in the M4 data set on 4/10/2013.
04/10/2013 12:04 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/04/10 10:00:41
04/10/2013 12:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/04/10
    09:58:06
04/10/2013 12:04 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/04/10
    09:58:06
04/10/2013 12:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/04/10 09:58:05
04/10/2013 12:04 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/04/10 09:58:05
04/10/2013 12:04 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/04/10
    09:58:04
04/10/2013 12:04 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/04/10
    09:58:04
04/10/2013 09:49 Troy
    M4 was upgraded from 1.5.1 to 1.5.4. The file LMJ-2013-100-S-011 can be
    used to patch the data that was missed while the P machine was being
    upgraded.

    Several sticks were thrown and some timing adjustments made to B gate.
    The C2C calculation logic was modified in the PLC, this is only a
    calculation and does not affect diversions.

    It was found that not all of the sticks were in the stick tag report on
    the ftp server. A new file was opened on the M4 S machine. All 57 sticks
    were passed through B gate and the file was closed on the S machine. We
    attempted to extract the tag codes and added to the copy of the stick tag
    report local to LMJ but were not successful. We will be emailing a copy
    of the file that has all the tag codes in it and will modify the stick
    tag file in the lab.
04/10/2013 06:10 darren@b
    22:TestTagFailure: No direct cause for this failure. PSMFC will
    investigate during the next site GMC.
04/10/2013 06:03 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/04/10 05:54:26
04/10/2013 06:03 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/04/10 05:52:26
04/10/2013 06:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/04/10 05:52:26
04/10/2013 06:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/04/10
    05:52:26
04/10/2013 06:03 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/04/10
    05:52:25
04/10/2013 06:03 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/04/10
    05:52:24
04/10/2013 06:03 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/04/10
    05:52:24
04/09/2013 18:03 DGE_Robo
    AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/04/09 15:59:37
04/09/2013 18:03 DGE_Robo
    AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/04/09 15:57:37
04/09/2013 12:43 rclark@b
    11:ReaderReset,12:InputSyncDetect,12:ReaderReset,13:InputSyncDetect,13:Rea
    derReset,21:ReaderReset,22:InputSyncDetect,22:ReaderReset,23:InputSyncDete
    ct,23:ReaderReset,31:ReaderReset,32:InputSyncDetect,32:ReaderReset,33:Inpu
    tSyncDetect,33:ReaderReset,41:ReaderReset,42:InputSyncDetect,42:RocketPort
    NoEOT,43:InputSyncDetect,43:ReaderReset,51:ReaderReset,52:InputSyncDetect,
    52:ReaderReset,61:ReaderReset,62:InputSyncDetect,62:ReaderReset,81:ReaderR
    eset,82:InputSyncDetect,82:ReaderReset,91:ReaderReset,92:InputSyncDetect,9
    2:ReaderReset,93:ReaderReset,A1:InputSyncDetect,A1:ReaderReset,A2:InputSyn
    cDetect,A2:ReaderReset,A3:InputSyncDetect,A3:ReaderReset,A4:ReaderReset,B1
    :ReaderReset,B2:InputSyncDetect,B2:ReaderReset,B3:InputSyncDetect,B3:Reade
    rReset,B4:InputSyncDetect,B4:ReaderReset,F1:InputSyncDetect,F1:ReaderReset
    ,F2:ReaderReset: Errors caused by a short power outage.
         AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/04/09 07:37:04
    AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/04/09 07:39:06
04/09/2013 09:06 Roger
    Performed site GMC on 4/9/2013. All transceivers were checked for tune and
    adjusted as needed. 10 sticks were thrown on the A and B gates. All sticks
    were read on all coils except for B4, which read 9 of 10. All sticks were
    diverted properly. PC1 is 18 seconds and PC2 is 26 seconds behind atomic
    time. There are no problems to report.
04/09/2013 09:02 DGE_Robo
    AC_Power (AC_Power) changed from 'OFF' to 'ON' at 2013/04/09 07:39:06
04/09/2013 09:02 DGE_Robo
    AC_Power (AC_Power) changed from 'ON' to 'OFF' at 2013/04/09 07:37:04
04/08/2013 08:40 NTancret
    Due to intermittent Devicemaster connectivity problems on M4 PC1, the
    roles were reversed. M4 PC1 was set to be the backup computer and M4 PC2
    was promoted to Primary. The last file collected with PC1 as primary was
    LMJ-2013-098-P-010. The first file opened with PC2 as primary is LMJ-2013-
    09-P-011.
04/08/2013 07:14 Alan
    The former DST rules caused the Multimon file creation intervals to be
    off by one hour. At 0808 PDT 4-8-2013, data collection was exited and
    restarted on both PCs to re-establish proper file creation intervals.
    Files LMJ13098.103 & .203 were the last files created prior to this
    procedure and were submitted manually. Outstanding files on PC2 were
    archived.
04/07/2013 12:02 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/04/07 09:57:56
04/07/2013 12:02 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/04/07 09:56:50
04/07/2013 12:01 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/04/07 09:55:39
04/07/2013 12:01 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/04/07
    09:54:38
04/07/2013 12:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/04/07
    09:54:38
04/07/2013 12:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/04/07 09:54:38
04/07/2013 12:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/04/07 09:54:38
04/07/2013 12:01 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/04/07
    09:54:37
04/07/2013 12:01 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/04/07
    09:54:37
04/07/2013 09:02 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/04/07 05:52:25
04/07/2013 09:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/04/07 05:50:33
04/07/2013 09:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/04/07 05:50:33
04/07/2013 09:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/04/07
    05:50:33
04/07/2013 09:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/04/07
    05:50:33
04/07/2013 09:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/04/07
    05:50:32
04/07/2013 09:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/04/07
    05:50:32
04/05/2013 09:49 rclark
    User: rclark. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Caused by PSMFC
    personnel during site visit.. Error:
    01: Antenna Current Low.
    01: Tuning Capacitance High.
    01: Tuning Capacitance Low.
    01: Tuning Out Of Range.
    01: Noise Level High.
04/05/2013 09:45 rclark
    User: rclark. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: clearing old errors
    from site. Error:
    32: Overrun.
    F1: Exc. Power low.
    31: Overrun.
    F1: Analog comm.
    A3: Test Tag Failed.
    A4: Test Tag Failed.
    B2: Test Tag Failed.
    B3: Test Tag Failed.
    B4: Test Tag Failed.
    A3: Analog comm.
    A3: Exc. Power low.
04/04/2013 12:01 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/04/04 10:09:56
04/04/2013 12:01 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/04/04
    10:00:13
04/04/2013 12:01 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/04/04
    10:00:13
04/04/2013 12:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/04/04
    10:00:12
04/04/2013 12:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/04/04 10:00:12
04/04/2013 12:01 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/04/04
    10:00:11
04/04/2013 12:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/04/04 10:00:11
04/04/2013 06:02 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/04/04 05:58:09
04/04/2013 06:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/04/04 05:57:16
04/04/2013 06:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/04/04 05:57:16
04/04/2013 06:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/04/04
    05:57:16
04/04/2013 06:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/04/04
    05:57:16
04/04/2013 06:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/04/04
    05:57:15
04/04/2013 06:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/04/04
    05:57:15
04/02/2013 08:56 Roger
    Performed site GMC on 4/2/2013. All transceivers were checked for tune and
    adjusted as needed. 10 sticks were thrown at the A and B gates. All
    transceivers read 10 of 10 except 32 and 41 which read 9 of 10. All sticks
    were diverted properly. PC1 and PC2 are 2 second behind atomic time. Files
    on PC2 were archived. There are no problems to report.
04/01/2013 15:00 NTancret
    Updated M4 and Multimon machines to use LMJ13088.DB as lookup file.

    Multimon PC1 and PC2 were 14  and 19 seconds behind atomic time,
    respectivelt. They were reset to be within one second of each other and
    atomic time. Uploaded LMJ13091.207 as gap file for Multimon machines.
04/01/2013 12:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/04/01
    09:59:44
04/01/2013 12:02 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/04/01 10:06:51
04/01/2013 12:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/04/01
    09:59:43
04/01/2013 12:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/04/01
    09:59:40
04/01/2013 12:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/04/01
    09:59:40
04/01/2013 12:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/04/01 09:59:40
04/01/2013 12:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/04/01 09:59:40
04/01/2013 06:02 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/04/01 05:59:37
04/01/2013 06:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/04/01 05:24:21
04/01/2013 06:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/04/01 05:24:21
04/01/2013 06:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/04/01
    05:24:21
04/01/2013 06:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/04/01
    05:24:21
04/01/2013 06:01 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/04/01
    05:24:19
04/01/2013 06:01 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/04/01
    05:24:19
03/31/2013 18:01 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'ON' to 'OFF' at 2013/03/31
    17:40:29
03/31/2013 18:01 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'ON' to 'OFF' at 2013/03/31
    17:40:29
03/31/2013 18:01 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/03/31
    17:40:20
03/31/2013 18:01 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/03/31
    17:40:20
03/31/2013 18:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/03/31 17:40:20
03/31/2013 18:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/03/31 17:40:20
03/31/2013 15:02 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/03/31 14:55:33
03/31/2013 15:02 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/03/31
    14:55:33
03/31/2013 15:02 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/03/31 14:55:32
03/31/2013 15:02 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/03/31
    14:55:32
03/31/2013 15:02 DGE_Robo
    B_DivertDuringSample (B_DDSample) changed from 'OFF' to 'ON' at 2013/03/31
    14:55:31
03/31/2013 15:02 DGE_Robo
    A_DivertDuringSample (A_DDSample) changed from 'OFF' to 'ON' at 2013/03/31
    14:55:30
03/31/2013 10:02 scottl@b
    04:InputSyncDetect,04:ReaderReset,A3:TestTagFailure,A4:TestTagFailure,B2:T
    estTagFailure,B3:TestTagFailure,B4:TestTagFailure: Start of season,
    clearing alarms
03/31/2013 09:59 scottl@b
    04:InputSyncDetect,04:ReaderReset: Noted, detection efficiencies are not
    effected.
03/30/2013 06:53 scottl
    User: scottl. Site: LMJ. Comments: No Comments.  Event date: 3/30/2013
    7:52:57 AM.  Site activity: up
03/28/2013 18:00 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/03/28
    17:01:05
03/28/2013 18:00 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/03/28
    17:01:04
03/28/2013 11:07 Troy
    A the site for a pre-season visit to set the Coil To Coil timing for the
    gates and ensure the gates are working properly. No problems to report,
    the gates are working well. Below are the PLC times.

    A Gate
    Delay Op     5
    Travel Open  26
    Time Open    102
    Travel Close 20
    Sec T/O      18
    Tert T/O     11
    Quat T/O     4
    A1 to A4  80
    A2 to A4 55
    A3 to A4 31
    Added Delay 45

    B Gate
    Delay Op     5
    Travel Open  27
    Time Open    100
    Travel Close 20
    Sec T/O      19
    Tert T/O     14
    Quat T/O     3
    B1 to B4 76
    B2 to B4 55
    B3 to B4 27
    Added Delay 55
03/27/2013 18:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/03/27 15:15:36
03/27/2013 18:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/03/27 15:15:36
03/27/2013 18:01 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/03/27 15:15:16
03/27/2013 18:01 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/03/27 15:15:16
03/27/2013 12:00 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/03/27
    11:47:45
03/27/2013 12:00 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/03/27
    11:47:45
03/27/2013 09:53 NTancret
    Updated M4 machines to use site configs LMJ-2013-086-P-1008026768 and LMJ-
    2013-086-S-1005051358, and lookup file lmj13086.db.

    Updated Multimon machines to use LMJ13086.MAP and LMJ13086.DB. PC1 and PC2
    clocks are within 2 seconds of atomic time and each other. Submitted
    LMJ13086.206 as gap file.
03/27/2013 06:56 scottl
    User: scottl. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Will adjust the
    reader low current alarms threshold in order to suppress the false
    alarms.. Error:
    01: Antenna Current Low.
03/26/2013 09:48 scottl
    User: scottl. Site: LMJ. Antenna Group Name: All antenna groups were
    cleared. Antenna: All antennas were cleared. Comments: Clearing TASS for
    site start up. Error:
    03: Analog comm.
    03: Exc current low.
    02: Tuning Capacitance High.
    02: Tuning Out Of Range.
    01: Antenna Current Low.
    01: Noise Level High.
    02: Noise Level High.
03/26/2013 09:46 scottl
    User: scottl. Site: LMJ. Comments: Tuning to take place this afternoon.
    Event date: 3/21/2013 7:00:00 AM.
03/26/2013 09:11 Roger
    Performed site GMC on 3/26/2013. The full flow was checked for tune and
    adjusted as needed. There is currently no water going through the
    seperator. When I arrived at the PIT TAG room, the monitor for PC2 was on
    and Multimon was indicating that PC2 was diverting. It was determined that
    PC1 Rocketport expansion port 29 had failed. The cable was moved to port
    2A for both PC's. The hardware file on both PC's were changed to reflect
    the new primary and secondary PC ports. The time on both PC's was adjusted
    to within 1 second of atomic time. LMJ13085.206 and .208 were submitted as
    gap files. Total Commander was loaded on both M4 PC's. There are no other
    problems to report.
03/22/2013 09:41 alan@bay
    03:LowExcCurrent:         Clearing TASS- this is related to water up
    activities.
03/21/2013 10:10 Scott_Li

    Re-directed the Network Time Protocol to synchronize to Pool.NTP.org  Set
    task scheduler to trigger the time synchronization process every day and
    re-occur every hour indefinitely. Also turned on the history logging
    within task scheduler. This should keep the two M4 PC's in perfect time
    with each other and the atomic clock.
03/20/2013 14:25 Alan
    The site was visited for what was thought to be water up of the bypass
    flume, but a problem with a crane has caused another delay. Water up
    could be tonight but will most likely be tomorrow.

    All transceivers were found to be in good working order. The annual
    Multimon data collection platform reset was performed. The clocks were
    set to within one second of atomic time. Any file gaps are
    inconsequential as the facility is dewatered.
03/16/2013 08:02 troy@bay
    03:LowExcCurrent: Site de-watered, clearing TASS
03/11/2013 07:19 Troy@bay
    03:LowExcCurrent: FF de-watered, clearing TASS.
03/08/2013 14:26 sdudek@p
    User: sdudek@psmfc.org. Site: LMJ. Antenna Group Name: All antenna groups
    were cleared. Antenna: All antennas were cleared. Comments: all. Error:
03/08/2013 14:21 sdudek@p
    User: sdudek@psmfc.org. Site: LMJ. Antenna Group Name: All antenna groups
    were cleared. Antenna: All antennas were cleared. Comments: all. Error:
    01: Virtual Tag Test Failed.
    03:  Analog comm.
    04:  Overrun.
    03:  Exc current low.
    02: Virtual Tag Test Failed.
    04:  Excessive noise level.
    02: Antenna Current Low.
    02: Tuning Capacitance High.
    01: Noise Level High.
    02: Noise Level High.
    02: Tuning Out Of Range.
    04:  Analog comm.
    03:  Overrun.
    04:  Memory full.
    04:  Exc current low.
03/06/2013 15:07 Scott_Li

    On all M4 SByC PC's, set the time Sync process to run every 1 hrs rather
    than the default of 1 time per week.  This is an attempt to keep the M4
    clustering as synchronized as possible.
03/04/2013 09:53 Scott_Li

    Mystery solved, the old LMJ PC was connected to the network in the lab
    sending in files. LMJ data processing should be back in line after the
    12:00 pm load cycle.
03/03/2013 12:31 scottl
    Something odd is happening when PC1 uploads files. All files that are auto
    uploaded do not contain any transceiver information but do have time
    stamps and configuration info. PCA into site to look at the raw data
    files. At the platform level, all transceiver information is being
    collected but when the file hit the PTAGIS servers, transceiver
    information is not included. If the files are manually pushed to the
    servers, the files are all in tact. Site is de-watered so no further
    efforts will be made today. Further investigation and resolution will be
    done on Monday first thing AM.

    Also, checked to see if the RP info matched the physical port settings and
    it appears that it does.

    Unchecked the FTP passive mode setting to see if that had any effect.
    seriously doubt it. Will check later this afternoon to see if anything has
    changed
03/01/2013 09:06 Scott_Li

    The site would not upload files subsequent to the replacement of the
    primary computer. Remoted into the site and deleted all temp files in the
    PTTP  .temp dir, changed uploader setting to FTP passive mode. Manually
    pushed files to the server. Will monitor.
02/28/2013 14:05 Roger
    On site 2/28/2013 to replace PC1. The PC was replaced and ports were
    tested. Last file on PC2 was LMJ13059.206. The first file on PC1 is
    LMJ13059.129. There are no problems to report.
02/28/2013 07:59 Scott_Li

    Had Bill S. power cycle the DSL modem, connection was restored but PC1 is
    having issues. Bill tried to restart the PC , the system reports that no
    mouse was found, scandisk needs to be performed. The PC will not boot and
    should be replaced. This is the second PC failure in the last month. Will
    correct situation ASAP.
02/28/2013 07:44 Troy
    Access the HMI and reset the Comm's Fault that was caused by a power
    outage.
02/15/2013 08:30 Troy@bay
    03:LowExcCurrent: FF is de-watered, clearing TASS.
02/14/2013 12:58 Roger
    Installed replacement PC for PC1 on 2/14/2013. Communications was tested
    to the transceivers and gates. The new start of files is LMJ13045.110. The
    last file on PC2 is LMJ13045.205. The hard drive on PC2 is a bit noisy.
    There are no other problems to report.
02/13/2013 15:44 Don_Warf

    Removed Multimon PC1 due to a noisy fan motor. Will be replaced shortly.
02/03/2013 07:42 troy@bay
    03:LowExcCurrent: Site down, clearing TASS.
01/30/2013 12:04 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'OFF' to 'ON' at 2013/01/30
    11:02:37
01/30/2013 12:04 DGE_Robo
    B_Sample_100% (B_S100) changed from 'ON' to 'OFF' at 2013/01/30 11:02:37
01/30/2013 12:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/01/30
    11:02:34
01/30/2013 12:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/01/30 11:02:34
01/30/2013 12:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/01/30 10:58:26
01/30/2013 12:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/01/30
    10:58:26
01/30/2013 12:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/01/30
    10:57:58
01/30/2013 12:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/01/30 10:57:58
01/30/2013 12:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/01/30 10:57:42
01/30/2013 12:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/01/30
    10:57:42
01/30/2013 12:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/01/30
    10:57:25
01/30/2013 12:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/01/30 10:57:25
01/30/2013 12:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/01/30 10:57:03
01/30/2013 12:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/01/30
    10:57:03
01/30/2013 12:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/01/30
    10:56:23
01/30/2013 12:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/01/30 10:56:23
01/30/2013 12:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/01/30 10:56:11
01/30/2013 12:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/01/30
    10:56:11
01/30/2013 12:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/01/30
    10:56:03
01/30/2013 12:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/01/30 10:56:03
01/30/2013 12:04 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/01/30 10:55:50
01/30/2013 12:04 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/01/30
    10:55:50
01/30/2013 12:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/01/30
    10:55:42
01/30/2013 12:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/01/30 10:55:42
01/30/2013 12:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/01/30 10:55:29
01/30/2013 12:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/01/30
    10:55:29
01/30/2013 12:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/01/30
    10:55:15
01/30/2013 12:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/01/30 10:55:15
01/30/2013 12:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/01/30 10:52:33
01/30/2013 12:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/01/30
    10:52:32
01/30/2013 12:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/01/30
    10:47:32
01/30/2013 12:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/01/30 10:47:32
01/30/2013 12:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/01/30 10:45:15
01/30/2013 12:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/01/30
    10:45:14
01/30/2013 12:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/01/30
    10:45:08
01/30/2013 12:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/01/30 10:45:08
01/30/2013 12:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/01/30 10:43:54
01/30/2013 12:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/01/30
    10:43:54
01/30/2013 12:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/01/30
    10:42:09
01/30/2013 12:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/01/30 10:42:08
01/30/2013 12:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/01/30 10:40:29
01/30/2013 12:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/01/30
    10:40:29
01/30/2013 12:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/01/30
    10:39:47
01/30/2013 12:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/01/30 10:39:47
01/30/2013 12:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/01/30 10:39:35
01/30/2013 12:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/01/30
    10:39:35
01/30/2013 12:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/01/30
    10:39:27
01/30/2013 12:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/01/30 10:39:27
01/30/2013 12:03 DGE_Robo
    B_Sample_100% (B_S100) changed from 'OFF' to 'ON' at 2013/01/30 10:39:17
01/30/2013 12:03 DGE_Robo
    B_SampleGateBypass (B_SBypass) changed from 'ON' to 'OFF' at 2013/01/30
    10:39:17
01/30/2013 12:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/01/30 10:37:40
01/30/2013 12:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/01/30
    10:37:40
01/30/2013 12:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'OFF' to 'ON' at 2013/01/30
    10:37:30
01/30/2013 12:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'ON' to 'OFF' at 2013/01/30 10:37:30
01/30/2013 12:03 DGE_Robo
    A_Sample_100% (A_S100) changed from 'OFF' to 'ON' at 2013/01/30 10:37:27
01/30/2013 12:03 DGE_Robo
    A_SampleGateBypass (A_SBypass) changed from 'ON' to 'OFF' at 2013/01/30
    10:37:27
01/30/2013 12:03 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/01/30 10:09:39
01/30/2013 12:03 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/01/30 10:08:16
01/30/2013 09:03 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'CLOSED' to 'OPEN' at
    2013/01/30 08:14:39
01/30/2013 09:03 DGE_Robo
    PrimaryBypass (PrimaryBypass) changed from 'OPEN' to 'CLOSED' at
    2013/01/30 08:11:36
01/28/2013 07:24 Troy@bay
    03:LowExcCurrent,04:LowExcCurrent: FF is de-watered, clearing TASS.
01/13/2013 08:17 rclark@b
    03:LowExcCurrent,04:LowExcCurrent:      The full flow is dewatered.
01/12/2013 08:27 rclark@b
    03:LowExcCurrent,04:LowExcCurrent:      The full flow is dewatered.
01/11/2013 07:18 rclark@b
    03:LowExcCurrent:    The full flow is dewatered.
01/07/2013 08:04 rclark@b
    03:LowExcCurrent,04:LowExcCurrent:      The Full Flow is de-watered.
    Claering TASS.
01/06/2013 07:42 troy@bay
    03:LowExcCurrent,04:LowExcCurrent: FF is de-watered, clearing TASS.
01/05/2013 08:43 troy@bay
    03:LowExcCurrent,04:LowExcCurrent: Site dewatered, clearing TASS.
01/04/2013 07:19 Troy@bay
    03:LowExcCurrent,04:LowExcCurrent:  FF is dewatered, clearing TASS.
01/03/2013 07:40 Troy@bay
    03:LowExcCurrent,04:LowExcCurrent:  FF is dewatered, clearing TASS.
01/02/2013 16:17 Troy
    The M4 version was uninstalled, and the appropriate folders deleted. M4
    version 1.5.1.0 was then installed.
01/02/2013 00:00 PTOC_Bot
    Annual log file initiation for LMJ

         #### End of Event Log for LMJ ###