EVENT LOG FOR SITE MC2 The first line of each entry contains a date/time stamp & who is reporting. The most recent entry is listed first. Date Time Who ---------- ----- -------- 11/17/2013 08:36 rclark User: rclark. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: 01: Noise Level High. 02: Noise Level High. 11/17/2013 08:33 rclark User: rclark. Site: MC2. Antenna Group Name: . Antenna: No errors were removed. Comments: Caused by known noise events. Noted.. Error: 11/16/2013 07:07 rclark User: rclark. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: noted.. Error: 01: Noise Level High. 02: Noise Level High. 11/15/2013 07:18 rclark User: rclark. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted.. Error: 01: Noise Level High. 0A: Analog comm. 02: Noise Level High. 11/14/2013 07:13 rclark User: rclark. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Caused by known periodic noise spikes. Noted.. Error: 01: Noise Level High. 02: Noise Level High. 11/12/2013 07:05 rclark User: rclark. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 01: Noise Level High. 11/11/2013 08:08 dchase User: dchase. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Alarm noted. Clearing TASS.. Error: 01: Noise Level High. 11/10/2013 06:17 dchase User: dchase. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noise spikes, systems are detecting at very high efficiencies.. Error: 01: Noise Level High. 02: Noise Level High. 11/09/2013 09:07 dchase User: dchase. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: PSMFC is aware of the noise spikes that cause this situation.. Error: 01: Noise Level High. 02: Noise Level High. 01: Virtual Tag Test Failed. 11/08/2013 09:06 thumphre User: thumphrey. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be investigated on the next site visit.. Error: 01: Noise Level High. 02: Noise Level High. 11/07/2013 10:24 dchase According to site personnel the picketed leads were raised and dogged at 08:29 on 11-1-13. This will impact the efficiencies for the CW antennas. 11/07/2013 07:36 dchase User: dchase. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: PSMFC is aware of the noise spikes that may be causing these occasional alarms on these systems.. Error: 01: Noise Level High. 02: Noise Level High. 11/06/2013 08:13 dchase User: dchase. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: PSMFC is aware of the noise spikes that cause these brief moments of noise. All detections and timer tags are running at 100% efficiencies.. Error: 01: Noise Level High. 02: Noise Level High. 11/04/2013 07:48 dchase User: dchase. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: We are aware of the noise spikes on these systems. The spikes cause the alarm but the noise is not sustained.. Error: 01: Noise Level High. 02: Noise Level High. 11/03/2013 08:10 Alan User: Alan. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Low count alarms. Error: 01: Noise Level High. 02: Noise Level High. 11/03/2013 08:02 Alan EOT is investigating the communications issues at McNary. 11/02/2013 07:08 Alan User: Alan. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Low count alarms. Error: 01: Noise Level High. 02: Noise Level High. 11/01/2013 07:21 Alan User: Alan. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be investigated during the next site visit. These transceivers are reading PIT tags and timer tags well.. Error: 01: Noise Level High. 02: Noise Level High. 10/31/2013 07:18 Alan User: Alan. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: These transceivers are reading PIT tags and timer tags well.. Error: 01: Noise Level High. 02: Noise Level High. 10/30/2013 07:32 Alan User: Alan. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: These transceivers are reading PIT tags and timer tags well.. Error: 01: Noise Level High. 02: Noise Level High. 10/29/2013 09:57 rclark Performed site GMC on 10/29/2013. All transceivers were checked for tune and adjusted as needed. PC1 and PC2 are within 1 second of atomic time. There are no problems to report. 10/29/2013 07:47 Alan User: Alan. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be investigated today during a site visit.. Error: 01: Noise Level High. 02: Noise Level High. 03: Noise Level High. 01: Virtual Tag Test Failed. 02: Virtual Tag Test Failed. 03: Virtual Tag Test Failed. 10/28/2013 07:53 Alan User: Alan. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be investigated during the next site visit.. Error: 01: Noise Level High. 02: Noise Level High. 10/28/2013 07:19 dlwarf User: dlwarf. Site: MC2. Antenna: 01. Comments: Noise alarms to be investigated tomorrow during a GMC.. Message: show errors 10/25/2013 06:19 scottl User: scottl. Site: MC2. Antenna Group Name: COUNTING WINDOW. Antenna: 03. Comments: Will investigate and correct if necessary,. Error: 03: Noise Level High 10/25/2013 06:19 scottl User: scottl. Site: MC2. Antenna Group Name: COUNTING WINDOW. Antenna: 02. Comments: Will investigate and correct if necessary,. Error: 02: Noise Level High 10/25/2013 06:19 scottl User: scottl. Site: MC2. Antenna Group Name: COUNTING WINDOW. Antenna: 01. Comments: Will investigate and correct if necessary,. Error: 01: Noise Level High 10/23/2013 06:56 dchase User: dchase. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noise spikes causing this alarm.. Error: 01: Noise Level High. 02: Noise Level High. 10/22/2013 07:16 dchase User: dchase. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noise reports indicate short spikes during the time frame of the alarms. PSMFC will investigate during the next site GMC.. Error: 0A: Analog comm. 01: Noise Level High. 02: Noise Level High. 03: Noise Level High. 10/20/2013 07:07 thumphre User: thumphrey. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: PSMFC is aware of this. Antennas are reading fish at 100% efficiency.. Error: 01: Noise Level High. 02: Noise Level High. 10/19/2013 06:53 thumphre User: thumphrey. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: The last alarms appear to be a one time occurrence. PSMFC will continue to monitor.. Error: 0A: Analog comm. 01: Noise Level High. 02: Noise Level High. 10/18/2013 06:43 dchase User: dchase. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: After some investigation it appears that the high noise levels are being caused by spikes. There is no sustained time of high noise and detection levels are extremely efficient.. Error: 01: Noise Level High. 02: Noise Level High. 03: Noise Level High. 01: Virtual Tag Test Failed. 02: Virtual Tag Test Failed. 03: Virtual Tag Test Failed. 10/17/2013 06:19 thumphre User: thumphrey. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be addressed on the next site visit. The antennas are reading fish and TT's at 100% efficiency. . Error: 01: Noise Level High. 02: Noise Level High. 10/16/2013 07:21 dchase User: dchase. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: These alarms will be investigated during the next site GMC.. Error: 01: Noise Level High. 02: Noise Level High. 10/15/2013 06:19 thumphre User: thumphrey. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: These transceivers are reading at 100% as of the latest CEA. PSMFC will monitor.. Error: 01: Noise Level High. 02: Noise Level High. 0A: Analog comm. 10/14/2013 07:21 dchase User: dchase. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: PSMFC will investigate these short instances of high noise. there is no indication that detection is being impacted.. Error: 01: Noise Level High. 02: Noise Level High. 10/13/2013 07:02 dchase User: dchase. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Alarms will be investigated during the next GMC.. Error: 01: Noise Level High. 02: Noise Level High. 0A: Analog comm. 10/11/2013 22:17 dchase User: dchase. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Clearing TASS.. Error: 01: Noise Level High. 02: Noise Level High. 10/11/2013 06:45 thumphre User: thumphrey. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 01: Noise Level High. 02: Noise Level High. 10/10/2013 06:34 dchase User: dchase. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Alarms will be investigated during the next site GMC.. Error: 01: Noise Level High. 02: Noise Level High. 10/09/2013 11:28 rclark Performed site GMC on 10/9/2013. All transceivers were checked for tune and adjusted as needed. M4 PC1 and PC2 are within 1 second of atomic time. There are no problems to report. 10/09/2013 06:52 thumphre User: thumphrey. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 01: Noise Level High. 10/08/2013 06:42 dchase User: dchase. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Alarms will be addressed during the next GMC.. Error: 01: Noise Level High. 02: Noise Level High. 0A: Analog comm. 10/07/2013 06:57 thumphre User: thumphrey. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: 01: Noise Level High. 02: Noise Level High. 10/06/2013 06:43 Alan User: Alan. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Transceivers are reading PIT tags at high efficiency.. Error: 01: Noise Level High. 02: Noise Level High. 10/05/2013 10:08 Alan User: Alan. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted, all of these transceivers are at 100% efficiency.. Error: 01: Noise Level High. 02: Noise Level High. 10/04/2013 07:50 Alan User: Alan. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. These transceivers are reading PIT tags and timer tags well.. Error: 01: Noise Level High. 02: Noise Level High. 10/02/2013 08:54 Alan User: Alan. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be investigated during the next site visit. Error: 0A: Analog comm. 01: Noise Level High. 01: Memory Low. 02: Noise Level High. 10/01/2013 08:04 thumphre Archive all Minimon files Adjusted the clock to account for DST. Installed M4 V1.5.4 Archived the SiteConfig file to KW_Files Uninstalled Minimon Restarted the computer. 09/27/2013 08:16 dlwarf User: dlwarf. Site: MC2. Antenna Group Name: COUNTING WINDOW. Antenna: 01. Comments: Monitoring noise on 01 at the counting window.. Error: 01: Noise Level High. 09/26/2013 07:28 dlwarf User: dlwarf. Site: MC2. Antenna Group Name: COUNTING WINDOW. Antenna: 01. Comments: Monitoring 01 at CW for noise.. Error: 01: Noise Level High. 09/25/2013 09:09 Alan User: Alan. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Clearing this time. Error: 01: Noise Level High. 09/25/2013 09:08 Alan User: Alan. Site: MC2. Antenna Group Name: . Antenna: No errors were removed. Comments: This will be investigated during the next site visit. Error: 09/24/2013 07:45 dlwarf User: dlwarf. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Monitoring noise at CW.. Error: 01: Noise Level High. 09/23/2013 13:00 dlwarf User: dlwarf. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: 01: Noise Level High. 09/23/2013 07:31 Alan User: Alan. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be investigated during the next site visit.. Error: 01: Noise Level High. 09/22/2013 06:40 rclark User: rclark. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be investigated during the next site visit.. Error: 01: Noise Level High. 09/21/2013 06:18 rclark User: rclark. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be checked during the next site visit.. Error: 01: Noise Level High. 09/20/2013 06:17 rclark User: rclark. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 01: Noise Level High. 09/19/2013 10:50 rclark User: rclark. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: MC2: Excessive noise level. MC2: Memory full. MC2: Noise Level High. 09/19/2013 06:20 rclark User: rclark. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be checked during the next site visit. Transceivers are detecting PIT tags with high efficiency.. Error: 01: Noise Level High. 02: Noise Level High. 03: Noise Level High. 09/18/2013 06:41 thumphre User: thumphrey. Site: MC2. Antenna Group Name: COUNTING WINDOW. Antenna: 01. Comments: No comments. Error: 01: Noise Level High 09/16/2013 14:51 Scott_Li Eastern Oregon is still working to resolve the internet connectivity to this site. They will call with status as soon as possible. Will monitor. 09/16/2013 14:51 Scott_Li Eastern Oregon is still working to resolve the internet connectivity to this site. They will call with status as soon as possible. Will monitor. 09/16/2013 06:35 Scott_Li It appears the storm knocked out communications and phone lines in the McNary area. Cannot reach the service provider via telco. Will continue to try and contact the provider. 09/16/2013 06:21 rclark User: rclark. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: MC2: Excessive noise level. MC2: Noise Level High. MC2: Memory Low. 09/16/2013 06:20 rclark User: rclark. Site: MC2. Antenna Group Name: COUNTING WINDOW. Antenna: 01. Comments: Noted. Error: 01: Noise Level High 09/15/2013 07:55 thumphre User: thumphrey. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: 01: Noise Level High. 02: Memory Low. 03: Memory Low. 09/13/2013 06:56 thumphre User: thumphrey. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: MC2: Excessive noise level. MC2: Memory Low. MC2: The following transceiver data could not be processed: MSG: Erasing Memory. MC2: The following transceiver data could not be processed: MSG: Memory Erased. MC2: The following transceiver data could not be processed: MSG: Reader Time Set To 08:58:44. MC2: The following transceiver data could not be processed: MSG: Set Cap 10 Curr: 3.83A dPh: -7. MC2: The following transceiver data could not be processed: MSG: Set Cap 10 Curr: 3.87A dPh: 1. MC2: The following transceiver data could not be processed: MSG: Set Cap 10 Curr: 3.92A dPh: -9. MC2: The following transceiver data could not be processed: MSG: Set Cap 9 Curr: 3.83A dPh: 9. MC2: The following transceiver data could not be processed: MSG: Set Cap 9 Curr: 3.89A dPh: 13. MC2: Noise Level High. MC2: Virtual Tag Test Failed. 09/13/2013 06:45 thumphre User: thumphrey. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: 01: Noise Level High. 03: Noise Level High. 03: Virtual Tag Test Failed. 09/10/2013 08:36 rclark Performed site GMC on 9/10/2013. Full flow transceivers 02 and 03 were replaced with FS2020 transceivers. M4 and Minimon configs were updated. All transceivers were checked for tune and adjusted as needed. PC1 and PC2 are within 1 second of atomic time. There are no problems to report. 09/07/2013 08:32 dchase User: dchase. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Clearing TASS. Error: 01: Memory Low. 09/07/2013 07:56 darren@b 01:MemLow: Alarm will be cleared during the next site visit. 09/06/2013 06:27 darren@b 01:MemLow: Alarm will be addressed during the next site visit. 09/05/2013 06:58 thumphre User: thumphrey. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Clearing all System and PLC errors.. Error: MC2: Excessive noise level. MC2: Analog comm. MC2: The following transceiver data could not be processed: Excessive noise level Memory full. MC2: Exc current low. MC2: Memory full. MC2: 02 transceiver has not responded in 65 minute(s).. MC2: Bad Exc. Freq.. MC2: Bad Osc. Freq.. MC2: Test Tag Failed. MC2: 03 transceiver has not responded in 65 minute(s).. MC2: Memory low. MC2: Overrun. MC2: 12 transceiver has not responded in 65 minute(s).. MC2: Virtual Tag Test Failed. MC2: Noise Level High. 08/31/2013 06:50 rclark User: rclark. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 0A: Analog comm. 08/29/2013 06:17 rclark User: rclark. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 0A: Analog comm. 08/27/2013 14:51 Scott_Li Due to BB alerts, EOT indicates that they have had several calls this afternoon regarding internet outages at the dam. This could be caused by work being done by the COE but this has not been confirmed. EOT tech is in route to investigate. 08/27/2013 10:32 rclark Performed site GMC on 8/27/2013. All transceivers were checked for tune and adjusted as needed. PC1 and PC2 are within 1 second of atomic time. There are no problems to report. 08/24/2013 09:26 Alan User: Alan. Site: MC2. Antenna Group Name: WEIR 308. Antenna: 0A. Comments: Noted. Error: 0A: Analog comm 08/22/2013 07:48 Alan User: Alan. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be investigated during the next site visit. This transceiver is reading PIT tags and timer tags well.. Error: 01: Noise Level High. 08/21/2013 07:09 Alan User: Alan. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be investigated during the next site visit. This transceiver is reading PIT tags and timer tags well.. Error: 01: Noise Level High. 08/20/2013 06:52 Alan User: Alan. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be investigated during the next site visit.. Error: 01: Noise Level High. 08/19/2013 09:22 Alan User: Alan. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 0A: Analog comm. 01: Noise Level High. 08/10/2013 07:40 dchase User: dchase. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Clearing TASS.. Error: 01: Virtual Tag Test Failed. 08/10/2013 07:15 darren@b 01:VTTFailed,02:BadOscFreq,02:LowExcCurrent,03:BadOscFreq,03:LowExcCurrent : Older Alarms. Clearing TASS. 08/08/2013 10:13 dlwarf User: dlwarf. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Alarms generated during troubleshooting of noise on 01.. Error: 02: Analog comm. 02: Bad Osc. Freq.. 02: Exc current low. 03: Exc current low. 03: Bad Osc. Freq.. 08/07/2013 12:00 Darren On Tuesday (8-6-13) PSMFC returned to findthe system on 01 to be 100% noise. The cable was removed from the antenna and a short cable and different FS1001A were attached, the noise was at 10%, re-attatched the original cable and the noise was 100%. The flex conduit was removed from the J-box to the antenna and the cable was straightened to see if teh cable was damaged or bad. Once the cable was attached the system was quiet fro about 45 min to 1 hour. The flex was returned over the cable and the system went to 100% noise, the short cable was then tried again but now that system was at 100% noise as well. the system remained that way until 14:30 then went quiet, PSMFC tried to induce the noise by wiggling the cable and removing the cap bank. Could not induce the noise. It was decied to leave the system and return to instal a sync cable between 01 and 02 and replace the FS1001A with an FS2020. 08/07/2013 11:51 Darren On Sunday (8-4-13) the detection system on 01 went to 100% noise, On Monday PSMFC was on site to investigate what the problem was with the system. The capacitor bank was removed and the wires leading down to the antenna were checked and moved to see if this would calm the noise. No change, the antenna was unplugged and reseated several times but again no change in the noise. A spectrum analyzer was setup and there was something found at 277kHz with modulation but could not figure out what the source was. the system was left in a state of 100% noise with the anticipation of returning on Tuesday to try and separate the system to find a problem. 08/07/2013 11:47 Darren PSMFC was on site today to pull a sync cable between trnasceivers 01 and 02, then the transceiver was replaced with an FS2020. The system was tuned and checked. Both M4 and Minimon platforms were changed to reflect the addition of the FS2020. If any file gaps they were minimal and no detections were present durng either configuration change. 08/07/2013 09:24 Alan User: Alan. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Generated by PTAGIS Field Operations personnel during a site visit.. Error: 0A: Analog comm. 02: Analog comm. 02: Test Tag Failed. 08/07/2013 06:10 darren@b 02:TestTagFailure: No direct cause for this failure. 08/06/2013 06:14 darren@b 02:TestTagFailure: No direct cause for this failure. Will investigate today during a site visit. 08/03/2013 08:02 thumphre User: thumphrey. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Alarm not of concern at this time.. Error: 0A: Analog comm. 07/30/2013 07:26 thumphre User: thumphrey. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted, clearing TASS. Error: 12: Bad Exc. Freq.. 12: Bad Osc. Freq.. 04: Exc current low. 12: Exc current low. 12: Test Tag Failed. 07/25/2013 06:44 darren@b 04:LowExcCurrent,12:BadExcFreq,12:BadOscFreq,12:LowExcCurrent,12:TestTagFa ilure: Alarms were investigated during a site GMC yesterday. 07/24/2013 11:40 rclark Performed site GMC on 7/24/2013. All transceivers were checked for tune and adjusted as needed. PC1 and PC2 are within 1 second of atomic time. Transceiver 04 has noise spiking that is antenna related. There are no other problems to report. 07/22/2013 06:17 scottl User: scottl. Site: MC2. Antenna Group Name: WEIR 308. Antenna: 0A. Comments: No comments. Error: 0A: Analog comm 07/16/2013 08:15 Alan Turned off transceiver alerts for xcvr12. 07/13/2013 07:18 alan@bay 12:TestTagFailure: Cleared on new TASS. 07/13/2013 07:16 Alan User: Alan. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 12: Test Tag Failed. 0A: Analog comm. 07/12/2013 12:31 rclark Performed site GMC on 7/12/2013. All transceivers were checked for tune and adjusted as needed. Tried replacing transceiver 12 to fix the no exciter current problem. The transceiver didn't fix the problem. Either the antenna or antenna cable must have a catastrophic failure. Left the transceiver turned off. PC1 and PC2 are within 1 second of atomic time. There are no other problems to report. 07/12/2013 09:25 alan@bay 12:TestTagFailure: Cleared on new TASS. 07/12/2013 09:22 Alan User: Alan. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be addressed today during a site visit.. Error: 12: Test Tag Failed. 07/11/2013 08:00 alan@bay 12:TestTagFailure: Cleared on new TASS 07/11/2013 07:23 Alan User: Alan. Site: MC2. Antenna Group Name: WEIR 302. Antenna: 12. Comments: It appears that either the transceiver or the antenna is having issues. This will be investigated during the next site visit.. Error: 12: Test Tag Failed 07/10/2013 10:29 alan@bay 12:BadExcFreq,12:BadOscFreq,12:LowExcCurrent,12:TestTagFailure: Cleared on new TASS. 07/10/2013 10:06 Alan User: Alan. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be investigated during the next site visit.. Error: 12: Test Tag Failed. 12: Bad Exc. Freq.. 12: Bad Osc. Freq.. 12: Exc current low. 0A: Analog comm. 03: Analog comm. 07/09/2013 08:09 Alan User: Alan. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be investigated during the next site visit.. Error: 12: Bad Exc. Freq.. 12: Exc current low. 12: Test Tag Failed. 07/08/2013 08:17 Alan User: Alan. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This was addressed yesterday. Error: 12: Test Tag Failed. 07/07/2013 13:23 rclark@b 12:BadExcFreq,12:LowExcCurrent,12:TestTagFailure: Cleared on new TASS. 07/07/2013 06:26 rclark User: rclark. Site: MC2. Antenna Group Name: WEIR 302. Antenna: 12. Comments: This will be addressed during the next site visit. Error: 12: Test Tag Failed 07/07/2013 06:26 rclark User: rclark. Site: MC2. Antenna Group Name: WEIR 302. Antenna: 12. Comments: This will be addressed during the next site visit. Error: 12: Exc current low 07/07/2013 06:26 rclark User: rclark. Site: MC2. Antenna Group Name: WEIR 302. Antenna: 12. Comments: This will be addressed during the next site visit. Error: 12: Bad Exc. Freq. 07/06/2013 06:54 rclark User: rclark. Site: MC2. Antenna Group Name: WEIR 308. Antenna: 0A. Comments: Noted.. Error: 0A: Analog comm 07/02/2013 06:48 rclark@b 01:LowExcCurrent,01:Overrun,0B:LowExcCurrent: Cleared on new TASS. 07/02/2013 06:21 rclark User: rclark. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: 0B: Exc current low. 01: Exc current low. 01: Overrun. 07/02/2013 06:20 rclark User: rclark. Site: MC2. Antenna Group Name: . Antenna: No errors were removed. Comments: 01 was caused by PSMFC personnel. The current alarm threshold on 0B was remotely lowered.. Error: 07/01/2013 06:40 rclark@b 0B:LowExcCurrent: Cleared on new TASS. 07/01/2013 06:18 rclark User: rclark. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be addressed during the next site visit. Error: 0B: Exc current low. 06/29/2013 06:21 alan@bay 12:BadExcFreq,12:BadOscFreq,12:LowExcCurrent: Cleared on new TASS 06/29/2013 06:15 Alan User: Alan. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 12: Bad Exc. Freq.. 12: Bad Osc. Freq.. 12: Exc current low. 06/27/2013 07:23 thumphre User: thumphrey. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 12: Exc current low. 0A: Analog comm. 06/27/2013 07:22 Troy@bay 12:LowExcCurrent: Noted 06/26/2013 11:30 rclark Performed site GMC on 6/26/2013. All transceivers were checked for tune and adjusted as needed. PC1 and PC2 are within 1 second of atomic time. There are no problems to report. 06/23/2013 08:14 thumphre User: thumphrey. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 0A: Analog comm. 06/19/2013 11:48 rclark Performed site GMC on 6/19/2013. All transceivers were checked for tune and adjusted as needed. PC1 and PC2 are within 1 second of atomic time. There are no problems to report. 06/16/2013 08:23 dchase User: dchase. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Clearing TASS. Error: 01: Memory low. 06/14/2013 07:04 dchase User: dchase. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Alarm will be investigated during the next site GMC.. Error: 0A: Analog comm. 06/13/2013 08:08 dlwarf User: dlwarf. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Minor errors. Clearing new TASS.. Error: 02: Analog comm. 03: Memory low. 06/12/2013 15:25 rclark Performed site GMC on 6/12/2013. All transceivers were checked for tune and adjusted as needed. PC1 and PC2 are within 5 seconds of atomic time. There are no problems to report. 06/10/2013 13:04 Scott_Li Retuned MC1 transceivers 01 and 02 while at the site investigating the noise issues at MC2. When arrived at MC2, the noise levels where quite. Found that all three transceivers are on their own dedicated breaker. The transformer that feeds the transceiver distribution breaker panel is directly below this cabinet. Talked with a few maintenance personnel while on-site about what could be causing the issues. They doubted that the crane was the problem, it hadn't been used during the time frames the noise crops up. Waiting to see if the noise crops back up this afternoon. If so, will run to the site while noisey. 06/08/2013 16:29 rclark@b 02:LowExcCurrent: Cleared on new TASS. 06/08/2013 07:37 rclark User: rclark. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Caused by PSMFC personnel during site visit.. Error: 02: Exc current low. 03: Analog comm. 06/07/2013 07:00 scottl User: scottl. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 03: Bad Exc. Freq.. 03: Bad Osc. Freq.. 03: Exc current low. 03: Test Tag Failed. 06/06/2013 06:22 scottl@b 03:BadExcFreq,03:BadOscFreq,03:LowExcCurrent,03:TestTagFailure: Noted, these errors have been corrected 06/05/2013 06:00 rclark@b 02:LowExcCurrent: Cleared on new TASS. 06/04/2013 15:28 rclark User: rclark. Site: MC2. Antenna Group Name: COUNTING WINDOW. Antenna: 02. Comments: Errors caused by PSMFC personnel during site visit.. Error: 02: Exc current low. 06/04/2013 13:09 rclark Performed site GMC on 6/4/2013. All transceivers were checked for tune and adjusted as needed. Counting window antenna 02 was replaced due to an intermittent Molex connector. The Molex connection on transceiver 03 is starting to go bad and the transceiver should be replaced during the next site visit. The clocks on PC1 and PC2 are within 1 second of atomic time. There are no other problems to report. 05/30/2013 07:26 thumphre User: thumphrey. Site: MC2. Antenna: 06. Comments: No comments. Message: show errors 05/28/2013 12:28 Roger Performed site GMC on 5/28/2013. All transceivers were checked for tune and adjusted as needed. It was necessary to turn the exciter power down on transceiver 12 to 1.4A in order to reduce noise. The antenna current alarm level was lowered to 1.1A. PC1 and PC2 are within 1 second of atomic time. The UPS for PC1 had a battery alarm and was replaced with an APC 750. There are no other problems to report. 05/26/2013 08:20 thumphre User: thumphrey. Site: MC2. Antenna: 06. Comments: No comments. Message: do not show errors 05/24/2013 07:02 thumphre User: thumphrey. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 0A: Analog comm. 05/22/2013 10:52 Roger Performed site GMC on 5/22/2013. All transceivers were checked for tune and adjusted as needed. PC1 and PC2 are within 1 second of atomic time. There are no problems to report. 05/21/2013 07:25 Troy@bay 12:LowExcCurrent: This alarm will be addressed on the next site visit. 05/20/2013 06:31 dchase User: dchase. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Alarm will be investigated during the next site GMC.. Error: 12: Exc current low. 05/18/2013 06:51 rclark@b 12:LowExcCurrent: Cleared on new TASS. 05/18/2013 06:42 rclark User: rclark. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: These alarms will be addressed during the next site visit.. Error: 0A: Analog comm. 12: Exc current low. 05/15/2013 12:05 Roger Performed site GMC on 5/15/2013. All transceivers were checked for tune and adjusted as needed. PC1 and PC2 are within 3 seconds of atomic time. There are no problems to report. 05/15/2013 06:41 rclark User: rclark. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This alarm will be checked during today's site visit.. Error: 0A: Analog comm. 05/13/2013 06:31 rclark@b 12:BadExcFreq,12:BadOscFreq,12:LowExcCurrent,12:TestTagFailure: Cleared on new TASS. 05/13/2013 06:13 rclark User: rclark. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will be checked during the next site visit.. Error: 12: Bad Exc. Freq.. 12: Bad Osc. Freq.. 12: Exc current low. 12: Test Tag Failed. 05/09/2013 06:18 scottl User: scottl. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: 02: Exc current low. 05/08/2013 14:25 rclark@b 12:BadExcFreq,12:BadOscFreq,12:LowExcCurrent: Transceiver was reset during todays site visit. 05/08/2013 14:24 rclark@b 02:LowExcCurrent: Caused during site GMC. 05/08/2013 11:42 Roger Perfrormed site GMC on 5.8.2013. All transceivers were checked for tune and adjusted as needed. Transceiver 12 was reset to clear a bad osc freq alarm. PC1 and PC2 are within 1 second of atomic time. There are no problems to report. 05/08/2013 07:07 scottl User: scottl. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: 12: Bad Exc. Freq.. 12: Bad Osc. Freq.. 12: Exc current low. 05/01/2013 12:17 Roger Performed site GMC on 5/1/2013. All transceivers were checked for tune and adjusted as needed. PC1 and PC2 are within 1 second of atomic time. There are no problems to report. 04/30/2013 06:34 dchase User: dchase. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Alarms will be investigated during the next site GMC.. Error: 0A: Analog comm. 04/25/2013 10:17 Darren PSMFC was on site today to replace the transceiver on antenna 01. This transceiver was found yesterday to have a bad Molex connector on the analog board. 04/24/2013 12:21 Roger Performed site GMC on 4/23/2013. All transceivers were checked for tune and adjusted as needed. Counting window transceiver 01 had high noise. Determined that there is a flakey connection at the molex connector for the analog board. This transceiver will be replaced on 4/25/2013. PC1 and PC2 are within 1 second of atomic time. There are no other problems to report. 04/22/2013 06:44 thumphre User: thumphrey. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 0A: Analog comm. 04/17/2013 11:54 Roger Performed site GMC on 4/17/2013. All transceivers were checked for tune and adjusted as needed. PC1 and PC2 are within 1 second of atomic time. There are no problems to report. 04/14/2013 08:29 dchase User: dchase. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Older alarm. Will be investigated during the next site visit.. Error: 0A: Analog comm. 04/12/2013 14:19 Don_Warf Transceiver 01 went noisy from around noon on 4/10/13 then went quiet the next day around 8:00 am. Counting window personnel do not know of any electrical device operated on this time schedule. All dimmer switches had been replaced with toggle switches previous to this noise event. 04/11/2013 14:53 Alan No PIT tag detections occurred during the M4 upgrade on 4/11/2013. 04/10/2013 14:30 Troy During the upgrade from M4 1.5.1 the clocks were not updated to recognize Daylight Savings Time. Remoted back into the M4 PC's and stopped all services, Stopped the Background service and exited. Changed the clock to recognize DST and restarted the service on M4. 04/10/2013 12:51 Troy M4 was upgraded from 1.5.1 to 1.5.4. No problems to report. 04/10/2013 11:35 Roger Performed site GMC on 4/10/2013. All transceivers were checked for tune and adjusted as needed. PC1 and PC2 are within 1 second of atomic time. There are no problems to report. 04/05/2013 09:47 rclark User: rclark. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: No comments. Error: 03: Memory low. 04: Memory low. 04/05/2013 09:46 rclark User: rclark. Site: MC2. Antenna Group Name: WEIR 308. Antenna: 0A. Comments: Noted. Error: 0A: low temperature. 0A: Analog comm. 04/01/2013 13:53 Roger Performed site GMC on 4/1/2013. All transceivers were checked for tune and adjusted as needed. PC1 and PC2 are within 1 second of atomic time. There are no problems to report. 04/01/2013 06:16 Darren I was on site Thursday (3-28-13) to investigate the Air Conditioner noise. When I arrived there were 4 COE electricians i the pittag room trying to find an alarm for the noise. I explained that there was no alarm and pointed out which transceivers and which circuit they were wired to. The breakers were off so there was no noise. They checked the AC for noise as we ran the new system, which as we found out has a variable speed fan inside, and found that when the fan is on a low setting the noise increased so we set the AC unit up to run with a continuous fan at high speed. This did not seem to increase the noise. When we turned on both systems the noise increased as well. Also the COE electricians were measuring the current draw on the panel and when both systems are on we are at 39A, the transformer which supplies the panel is rated for 41A, close to taxing the system. I left the new system running and checked with Don on Friday morning and all seem to be fine. 03/30/2013 06:56 scottl User: scottl. Site: MC2. Antenna: 03. Comments: Noted. Message: show errors 03/27/2013 08:33 Roger Performed site GMC on 3/27/2013. All transceivers were checked for tune and adjusted as needed. PC1 and PC2 are within 1 second of atomic time. There are no problems to report. 03/22/2013 09:44 alan@bay 0A:LowTemp: Noted 03/17/2013 08:06 thumphre User: thumphrey. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: This will addressed on the next site visit.. Error: 02: Exc current low. 03/15/2013 06:42 Troy@bay 02:LowExcCurrent: This alarm will be addressed on the next site visit. 03/14/2013 09:29 Roger Performed site GMC on 3/14/2013. All transceivers were checked for tune and adjusted as needed. PC1 and PC2 are within 1 second of atomic time. There are no problems to report. 03/14/2013 07:21 Troy@bay 0D:TestTagFailure: Cleared using new TASS. 03/14/2013 07:13 thumphre User: thumphrey. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted. Error: 01: Excessive noise level. 02: Excessive noise level. 04: Excessive noise level. 0D: Test Tag Failed. 0A: Analog comm. 03/13/2013 06:54 dchase User: dchase. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Alarms will be addressed during the next site visit.. Error: 04: Excessive noise level. 01: Excessive noise level. 02: Excessive noise level. 03/12/2013 07:39 thumphre User: thumphrey. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Noted, clearing TASS. Error: 04: Excessive noise level. 03: Excessive noise level. 05: Excessive noise level. 01: Excessive noise level. 02: Excessive noise level. 03/11/2013 07:23 thumphre User: thumphrey. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Old alarms, clearing TASS. Error: 04: Excessive noise level. 01: Excessive noise level. 02: Excessive noise level. 03/10/2013 07:44 dchase User: dchase. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Alarms will be addressed during the next site visit.. Error: 01: Excessive noise level. 02: Excessive noise level. 04: Excessive noise level. 03/09/2013 09:03 dchase User: dchase. Site: MC2. Antenna Group Name: All antenna groups were cleared. Antenna: All antennas were cleared. Comments: Clearing TASS.. Error: 0A: Analog comm. 01: Excessive noise level. 02: Excessive noise level. 04: Excessive noise level. 06: Excessive noise level. 0D: Excessive noise level. 03/07/2013 07:09 darren@b 13:LowExcCurrent: Threshold will be adjusted to eliminate this alarm. 02/22/2013 11:53 Roger After calling into Eastern Oregon Telecon on-site, it was found that their tower is without power. They couldn't give an estimated time of repair. 02/22/2013 07:27 rclark@b 0D:LowExcCurrent,0D:TestTagFailure: This transceiver was retuned on 2/19/2013. 02/19/2013 08:57 Alan A GMC was performed 2-19-2013. All transceivers were checked and tuned as necessary. The clocks on both PCs are within one second of atomic time. No problems to report. 02/18/2013 06:35 alan@bay 0D:TestTagFailure: Noted 02/17/2013 07:09 alan@bay 0D:TestTagFailure: Noted. 02/16/2013 06:53 alan@bay 0D:TestTagFailure: Noted 02/15/2013 08:31 Troy@bay 0D:TestTagFailure: Noted 02/14/2013 08:10 alan@bay 0D:TestTagFailure,11:TestTagFailure: These alarms will be addressed during the next site visit. 02/10/2013 08:30 darren@b 0D:TestTagFailure,11:TestTagFailure: These systems need to be tuned since the ladder was watered up. They have the ability to detect PITtags with high efficiency. 02/05/2013 08:07 Troy@bay 0D:TestTagFailure,11:TestTagFailure: Faulty heater in the pit tag room is causing these alarms. The COE is aware of the problem. 02/03/2013 07:36 troy@bay 0D:TestTagFailure,11:TestTagFailure: These alarms are being caused by a faulty heater in the PIT tag room. The COE has been made aware of the problem. 02/02/2013 06:36 troy@bay 0D:TestTagFailure,11:TestTagFailure: These alarms are due to a heater in the PIT Tag room. The COE is aware of the problem. 02/01/2013 07:39 Troy@bay 0D:TestTagFailure,11:TestTagFailure: These alarms will be addressed on the next site visit. 01/31/2013 07:48 Troy@bay 0D:TestTagFailure,11:TestTagFailure: These alarms will be addressed on the next site visit. 01/29/2013 07:17 Troy@bay 05:Overrun,0B:Overrun,0D:TestTagFailure,11:TestTagFailure,13:LowExcCurrent : Ladder de-watered, clearing TASS. 01/28/2013 11:34 Roger Performed site GMC on 1/28/2013. All transceivers were checked for tune and adjusted as needed. All the odd numbered transceivers had elevated noise levels. When entering the PIT tag room, it was apparent that the AC/heater has a stuck thermostat amd the room is very warm. After turning the AC off, the noise level on the transceivers returned to normal. Contacted Carl and let him know about the AC/heater failure. He is submitting a maintenance ticket. The AC/heater was left on as per Carls recommendation. PC1 and PC2 are within 1 second of atomic time and each other. There are no other problems to report. 01/28/2013 07:26 Troy@bay 0B:Overrun,0D:TestTagFailure: These alarms will be addressed on the next site visit. 01/27/2013 08:33 alan@bay 0B:Overrun,0D:TestTagFailure: These alarms will be addressed during the next site visit. 01/26/2013 08:39 alan@bay 0B:Overrun,0D:TestTagFailure: These alarms will be addressed during the next site visit. 01/25/2013 14:39 Alan Site personnel report that the ladder watered up at ~1300 PST 1-24-2013. 01/25/2013 08:11 alan@bay 04:TestTagFailure,0B:LowExcCurrent,0B:Overrun,0C:BadExcFreq,0C:LowExcCurre nt,0C:TestTagFailure,0D:LowExcCurrent,0D:TestTagFailure,0F:LowExcCurrent,1 1:LowExcCurrent: Clearing TASS. It appears that the ladder watered up, confirmation of that will be posted when it is received. 01/21/2013 11:25 scottl@b 03:TestTagFailure,04:TestTagFailure,0C:BadExcFreq,0C:BadOscFreq,0C:LowExcC urrent,0C:TestTagFailure: Will look in to errors on Tuesday, not critical at this time. 01/17/2013 16:08 Darren The ladder was inspected from above today (1-17-13). The antennas were photographed and the conduits were checked for strapping and breaks. No problems were discovered during this inspection. 01/16/2013 07:16 scottl@b 04:TestTagFailure,0B:LowExcCurrent,0C:LowExcCurrent,11:TestTagFailure: Noted will address on the next site visit. 01/13/2013 08:18 rclark@b 04:TestTagFailure,0B:LowExcCurrent: The ladder is dewatered. 01/12/2013 08:29 rclark@b 03:TestTagFailure,04:TestTagFailure: The ladder is dewatered/ 01/11/2013 07:19 rclark@b 04:TestTagFailure,0B:LowExcCurrent,11:TestTagFailure,12:TestTagFailure: The ladder is dewatered. 01/10/2013 07:24 rclark@b 04:TestTagFailure,0B:LowExcCurrent,12:TestTagFailure: The ladder is dewatered. 01/09/2013 07:06 rclark@b 04:TestTagFailure,0B:LowExcCurrent,12:TestTagFailure: The ladder is dewatered. 01/08/2013 07:29 rclark@b 04:TestTagFailure,06:LowExcCurrent,0B:LowExcCurrent,0C:LowExcCurrent,0D:Te stTagFailure,10:LowExcCurrent,12:TestTagFailure,13:LowExcCurrent: The ladder is dewatered. 01/07/2013 09:00 Alan The ladder was taken to orifice flow at ~0900 1-6-2013. The stoplogs were installed at 0700 1-7-2013. Estimated return to service is no later than 1-24-2013. 01/04/2013 07:21 Troy@bay 0D:TestTagFailure: Noted 01/02/2013 16:17 Troy The M4 version was uninstalled, and the appropriate folders deleted. M4 version 1.5.1.0 was then installed. 01/02/2013 00:00 PTOC_Bot Annual log file initiation for MC2 #### End of Event Log for MC2 ###