EVENT LOG FOR SITE PRA

        The first line of each entry contains a date/time stamp & who is reporting.
        The most recent entry is listed first.

Date       Time  Who
---------- ----- --------
12/26/2006 07:12 scottl@r
    01:LowExcCurrent,02:LowExcCurrent,04:Overrun: Will tune transcievers on
    the next site visit in order suppress alarm messages.
12/12/2006 10:43 bturley@
    01:LowExcCurrent,02:LowExcCurrent,03:LowExcCurrent,04:Overrun:         Low
    Exciter Current and Overruns occurred because the ladder is dewatered.
    These readers were in standby since early November but apparently they
    were re-booted and went into scan mode. I put readers 01, 02, 03, and 04
    back into standby
10/27/2006 12:16 bturley@
    08:Overrun,08:TestTagFailure:         Overrun and test tag failure
    acknowledged
09/25/2006 12:13 bturley@
    08:TestTagFailure:         No indication why test tag failed.
09/25/2006 12:12 bturley@
    08:TestTagFailure:         No indication why test tag failed.
09/08/2006 08:40 bturley@
    08:TestTagFailure:         test tag failure acknowledged
08/31/2006 14:45 bturley@
    08:TestTagFailure:         test tag failure acknowledged
07/10/2006 09:05 myriad36
    08:TestTagFailure: Test tag failure, reason unknown; possibly due to
    DRS/noise eval data.
07/10/2006 09:04 myriad36
    05:TestTagFailure: Test tag failure, reason unknown; possibly due to
    DRS/noise eval data.
06/22/2006 08:42 bturley@
    08:TestTagFailure:         Test tag failed for unknown reason
06/12/2006 07:14 myriad36
    08:TestTagFailure: Test tag failure reason unknown; possibly due to Noise
    Report at the same time.
05/23/2006 10:18 bturley@
    07:HighTemp,08:TestTagFailure:         High temp alarm caused because the
    air conditioning in the trailer that the transceivers are in hasn't been
    turned on. I alerted Grant PUD personnel to the problem. So, they are
    having  the AC turned on.

    Test tag failure on coil 08 caused by unknown reason.
05/23/2006 10:15 bturley@
    05:Overrun:         Unexplained noise caused the overrun. Looks like an
    isolated event.
05/23/2006 10:15 bturley@
    02:Overrun:         Unexplained noise causing the overrun. Looks like an
    isolated event.
05/08/2006 07:16 myriad36
    08:Overrun,08:TestTagFailure: Overrun possible due to user activity
    onreader (H command, displays list of commands).
        Test tag failure possibly due to Noise Report during the same time.
05/08/2006 07:15 myriad36
    08:Overrun,08:TestTagFailure: Overrun possible due to user activity on
    reader (H command, displays list of commands).
    Test tag failure possibly due to Noise Report during the same time.
04/06/2006 10:20 bturley@
    01:LowExcCurrent,02:LowExcCurrent,04:LowExcCurrent,05:LowExcCurrent,08:Low
    ExcCurrent:        Low exciter current alarms occurred during maintenance.
    I flashed the transceivers with 5.0 software and re-tuned them. This is
    when the low exciter current alarms occurred.
04/06/2006 07:14 myriad36
    08:TestTagFailure: Test tag fired during a Noise report.  This may have
    caused the test tag to fail to read.
04/04/2006 07:25 BruceG@r
    08:TestTagFailure: No apparent reason for failure.
03/30/2006 12:17 myriad36
    08:TestTagFailure: Test tag failed for no noticable reason.
03/07/2006 08:51 bturley@
    08:TestTagFailure:         Unexplained test tag failure
01/25/2006 07:35 bturley@
    08:TestTagFailure:         Test tag failure for no apparent reason.
    Transceiver is tuned and noise is low.
01/13/2006 13:06 bturley@
    06:LowExcCurrent,07:LowExcCurrent,08:LowExcCurrent,08:TestTagFailure:
    Low Exciter Current alarms caused by dewatered ladder.
01/04/2006 08:28 bturley@
    06:LowExcCurrent,07:LowExcCurrent,08:LowExcCurrent:         Readers lost
    power, and when they re-set they came up with a low current alarm. Alarm
    was probably caused by the fact that the ladders are de-watered.
01/01/2006 12:40 PTOC_Bot
    Annual log file initiation for PRA

         #### End of Event Log for PRA ###