EVENT LOG FOR SITE A_PRJ First line of each entry lists date, time & who is reporting. Subsequent lines of each entry aligned under Time column. Do not use tabs, only spaces. Date Time Who What -------- ----- -------- ----------------------------------------------- 01/03/10 15:15 darren_c Scott and I arrived to stick test the facility. We started with 50 ISO sticks, after the first run through the monitors responded with A1-50,A2-49,A3-49. We ran them again this time we only caught 42 sticks. We ran them again and only caught 34 sticks. At first we suspected maybe the coils were not quite peaked so we adjusted the coils and re-ran sticks. We got 34 sticks. We then turned our focus to the sticks, by passing them over a coil we found that 16 would no longer read. We proceeded with the known good sticks and tested the separator and sample exit both performed well with the 34 good sticks. 12/15/99 15:13 scott_li Used remote access to restart mailer and send current files to the database que. ErrorLog for mailer indicated that the modem was being disconnected while trying to negotiate with Gldstone modems. Bumped up the RedialTries in the mailer.ini from 2 to 3. This should make mailer be alittle more persistent in trying to make connection. 12/15/99 13:34 Carter_S Check Submits flag in (~pittag/etc/sites)for Prosser was turned on today. 11/24/99 14:47 scott_li Computer platform was converted from Win95 to Win98 Operating system with Multimon ver 6.04, Laplink 2000 remote access and Mailer ver 2.3. Disk drives on PC1 and 2 were formatted to ensure of a clean installation of the 98' O.S. Reflashed ISO xceivers with 211.hex file. Verified send mail process. Subject line in Mailer.ini changed to reference MULTIMON. System is fully operational. System was back on line at ~ 1330 hrs , 11/24/99. 11/10/99 16:11 Carter_S The ISO configuration for PRJ has been set up: PRJ - PROSSER JUVENILE (CHAND DIV) ---------------------------------------------------------------------- Current Configuration -> Seq Nbr: 120 Main? Y, Active? Y, Parallel_A_B? B, Poll? N Current Configuration: Seq Nbr 120 -> 10-Nov-99 To Present Comment: Initial ISO Configuration Monitors in Sort_Str sequence: Nbr 1 -> SEPARATOR / SAMPLE Mon_Ctgry_Str: UNK, Entry_Y_N? Y, Exit_Y_N? Y, Sort_Str: 1 (Coil,Controller): (A1,00) (A2,01) (A3,03) Nbr 2 -> SAMPLE ROOM EXIT Mon_Ctgry_Str: SMP, Entry_Y_N? N, Exit_Y_N? Y, Sort_Str: 2 (Coil,Controller): (51,02) (52,04) 10/25/99 16:05 scott_li Reflashed sample monitors to reflect the revised coil i.d's for a sample room monitor, 51,52. Routed data to TESTDATA until further notice. All Fixed reference tags were fired and recorded in file prj99298.003 and sent to the testdata area on the Ptagis server. Purged the \archive and \data directories of 400 khz interrogation files on both pc1 and pc2. Removed Laplink 7.? and loaded L.L 2000. Configured and tested good. Copied latest map and hardware files to Site_Configurations/PRJ on the PSMFC FTP server. Also ran Scandisk on both pc1 and 2. 08/13/99 09:54 Carter_S 400kHz system is decommissioned. ISO system installation is in progress. 06/30/99 07:46 dlwarf Found PC1 locked up due to an Windows exception error. Rebooted. Loaded Mailer version 2.3 on both PCs. 06/17/99 15:43 scottl Cannot get mailer to tranfer files via laplink. Numerous and various attempt failed. Will travel to the site 6/18/99 in the AM to retrieve data. 06/08/99 10:58 dlwarf Laplinked in to send files. 05/24/99 13:08 scottl upgraded Multimon to version 6.04 ,Mailer to ver 2.2 and report.exe. Stick tested sub-sample monitor at 100 percent detection efficiency. Report indicated a problem on coils c6 on the 5/23 C.E. report. Coil C4 91 0 100.00 Coil C6 2 89 2.20 Repaired connector in exciter. 05/24/99 13:07 scottl upgraded Multimon to version 6.04 ,Mailer to ver 2.2 and report.exe. Stick tested sub-sample monitor at 100 percent detection efficiency. Report indicated a problem on coils c6 on the 5/23 C.E. report. Coil C4 91 0 100.00 Coil C6 2 89 2.20 Repaired connector in exciter. 05/04/99 17:40 dlwarf Visited site for a general maintenance check on 5/3/99 and found the mailer program running on PC2. Removed mailer.exe from the start-up group and rebooted. 05/02/99 09:17 scottl Laplinked into prosser and manually sent data files. Process wqas successful 04/27/99 11:41 carters PRJ-2, SAMPLE ROOM: Annunciator warnings acknowledged 03/22/99 15:54 dlwarf Replaced exciter for coils C8 and CA on 3/19/99 due to loose connection on coil C8. 03/08/99 16:09 scottl Loaded the recent version of the data file mailer, 1.6. This version will allow remote user to define a delay parameter to the manual connect. 02/22/99 12:44 scottl Interrogation equipment was powered up today. All coils where tuned and stick tested. All coils detected 20 of 20 stick tags. Replaced loop tuner on coil CE. PPP connection test to gladstone was successful. 02/22/99 14:32 carters Initial log creation for A_PRJ ####End of Event Log for A_PRJ###